Part No. | Chine Description | English Description | REMARK |
图纸 编号 | 中文描述 | 英文描述 | 备注 |
定子片 | STATOR LAMINATION | ||
转子片 | ROTOR LAMINATION | ||
定子 | FRAME-STATOR-COIL | ||
定子铁芯 | STATOR CORE | ||
定子铁芯 | STATOR-CORE INTERLOCKED | ||
定子铁芯 | STATOR CORE ASSEMBLY | ||
转子铁芯 | INTERLOCKED ROTOR CORE | ||
铸铝端盖 | END FRAME CAST | ||
铸铝端盖 | END-FRAME MACHINED | ||
压铸端盖 | END FRAME CASTING | ||
铁端盖 | END FRAME-STAMPING | ||
后盖 | END COVER | ||
端盖 | COVER BRACKET / BRKT CSTG OP/ENCL | ||
铸铝转子 | ROTOR CORE | ||
铸铝转子 | cast-aluminum rotor | ||
铸铝转子 | ROTOR-CORE (SPECIAL) | ||
铸铝转子 | ROTOR CORE CAST/MACH. | ||
轴 | SHAFT SHAFT(SINGLE FLAT) | ||
机壳 | MAIN FRAME | ||
槽楔 | SLOT-PEG / WEDGE | ||
槽绝缘纸 | SLOT-LINER /SLOT LINER | ||
槽绝缘 | INSULATION SLOT | ||
绝缘材料 | INSULATION MATERIAL | ||
保护器 | THERMOSTAT / PROTECTOR | ||
热保护器 | THERMOSTAT-ASSEMBLY | ||
热保护器与线 | THERMOSTAT-LEAD ASSEMBLY | ||
轴承 / 球轴承 | BEARING-BALL / BALL BEARING | ||
球形含油轴承 | BEARING SLEEVE | ||
含油轴承 滑动轴承 | BEARING SLEEVE / SLEEVE BEARING | ||
48轴承压簧 | 0048 SPRING BRG.LOADING | ||
48内固定盖 | 0048 CAP RETAINER INSIDE | ||
48轴承压圈 | 0048 SLINGER SLEEVE BRG | ||
挡圈 | RING RETAINING | ||
挡圈 | RETAING RING RET. RING | ||
平垫圈 | WASHER PLAIN | ||
调整垫圈 | FELT WASHER | ||
橡胶垫圈 | PLASTIC WASHER | ||
轴承波形垫圈 | BEARING SPRING | ||
轴承调整垫圈 | BEARING SPACER | ||
波形弹簧垫圈 | WAVE SPRING | ||
弹簧垫圈 | WASHER SPRING | ||
甩水圈 | SLINGER WATER | ||
橡胶甩水圈 | SLINGER RUBBER | ||
尼龙防水圈 | SLINGER NYLON | ||
防尘盖 | DUST CAP | ||
防护盖(轴承) | SHIELD (BEARING) | ||
喷漆防尘盖 | PAINTED DUST CAP | ||
减震圈 | DAMPING RING | ||
减振圈 | SPLIT RING | ||
护线圈 | GROMMET | 吃的笔画顺序||
螺钉 | SCREW | ||
螺钉 | STUD | ||
铆钉 | RIVET | ||
螺钉 | THRUBOLT | ||
#8-32长螺钉 | THRUBOLT #8-32 | ||
螺栓 | THRUBOLT 8-32 .164 | ||
螺栓 | STUD | ||
螺母 | NUT HEX SS | ||
六角螺母 | NUT HEX #8-32 | ||
六角螺母(加工螺纹) | NUT-HEX | ||
自攻螺钉 #10-32 NF | SELF FORMING SCREW #10-32 NF | ||
五金部件组件 | HARDWARE-GROUP | ||
| 合同授权委托书 | |||
端子片 | TERMINAL LUG | ||
端子 | TERMINAL FM KW KQ GQ MV PD AH FX GZ JD | ||
公接插件 | PLUG MALE-REVERSING | ||
母接插件 | PLUG FEMALE-REVERSING | ||
旗形母端子 | TERMINAL LEAD FLAG FEMALE | ||
1叉公端子 | TERMINAL MALE 1-PRONG | ||
母直端子 | STRAIGHT FEMALE | ||
连接片 | BONDING LUG | ||
接头 | SPLICE CONNECTOR | ||
连接器（接头） | CONNECTOR(SPLICE) FK | ||
电容 | CAPACITOR RUN | ||
电容 | CAPACITOR ROUND 370 VAC | ||
电容罩 | CAPACITOR HOUSING | ||
电容罩衬垫 | GASKET CAPACITOR HOUSING | ||
引线 | LEAD | ||
引线 | LEAD RED | ||
引出线图 | DWG-LEAD | ||
引线组 / 线束 | LEAD-GROUP / TERMINAL EK | ||
引出线组件 | LEAD-TERMINAL-ASSEMBLY | ||
引出线组件 | LEAD GROUP ASSEMBLY | ||
引线端子组合 | LEAD STRIPPED | ||
引出线端子装配 | DWG LEAD AND TERMINAL ASY | ||
绑扎带 | TIE CABLE | ||
接地线 | GROUND-LEAD | ||
绝缘套管 | INSULATING SLEEVE | ||
套管 | SNAP BUSHING | ||
套管 | SLEEVE | ||
套管 | SLEEVE INS | ||
底座 | RIGID BASE | ||
插孔 | PLUG-HOLE | ||
尼龙调垫 | WASHER-THRUST NYLON | ||
轴承衬套 | TNSERT BALL BRG | ||
轴承垫片 | WASHER STEEL BEARING | ||
导向杯型垫圈 | WASHER CUPPED LEAD | ||
3叶波垫 | 3 LEGGED SPRING | ||
塑料袋 | PLASTIC BAG | ||
装订钉 | STAPLES | ||
风叶 | FAN | ||
塑料风叶 | PLASTIC FAN | ||
纸箱 | CARTON WITHOUT CAP. | ||
铭牌 | NAMEPLATE | ||
铭牌 | INS. LABLE PRINT | ||
不干胶标签 | STICKER-FIELD WIRING | ||
不干胶铭牌 | NAMEPLATE ADHESIVE | ||
铭牌和标签图 | DWG NAMEPLATE AND LABLE | ||
Part No. | Chine Description | English Description | REMARK |
图纸 编号 | 中文描述 | 英文描述 | 备注 |
盖子 | COVOR | ||
喷漆端盖 | ENDFRAME PAINTED | ||
端盖加工 /金加工端盖 | END FRAME MACHINE /END FRAME MACHINED | ||
端盖装配 /端盖组件 | END FRAME ASSEMBLY /CANOPY ASSEMBLY | ||
车加工端盖 | 0048 BRACKET MCHD OPEN/ENCL 17MM SB | ||
0048 BRACKET ASY OPEN/ENCL SB | |||
轴坯(C形轴) | BODY(SHAFT-C) | ||
标准轴图 | SHAFT STDS. DWG | 怎么做胎教 | |
轴装配 | SHAFT ASSEMBLY | ||
转子装配 | ROTATING-ASSEMBLY | ||
转子端盖装配 | ROTATING-END FRAME ASS. | ||
嵌线定子 | STATOR & COIL ASSEMBLY STATOR-COIL | ||
嵌线定子标准 | WOUND CORE STDS. | ||
定子装配/机壳嵌线定子组件 | FRAME-STATOR-COIL ASSEMBLY | ||
定子铁芯装配 | STATOR CORE ASSEMBLY | ||
定子铁芯自铆 | STATOR-CORE INTERLOCKED | ||
转子铁芯自铆 | ROTOR CORE INTERLOCKED | ||
机壳组装 | MAIN FRAME ASSEMBLY | ||
机壳展开图 | MAIN-FRAME BLANK | ||
机壳展开 | BLANK SHELL | ||
互锁转子铁芯 | ROTOR CORE INTERLOCKED | ||
互锁定子铁芯 | STATOR CORE INTERLOCK | ||
绝缘定子铁心 | INSULATED STATOR CORE | ||
电机组装图 | MOTOR ASSEMBLY | ||
电机装配图 | MOTOR ASSEMBLY SQUARE FLANGE | ||
电机部装 | MOTOR SUB-ASSEMBLY | ||
装配图 | DRAWING GENERAL-ASSEMBLY | ||
电机外形图 | OUTLINE MOTOR | ||
外形图 | MOTOR OUTLINE SQUARE FLANGE | ||
电气说明 | SPECIFICATION ELECTRICAL | ||
连接图 | CONNECTION DIAGRAM | ||
内部连接图 | DWG DIAG INT CONN | ||
内接线图 | CONNECTION-DIAGRAM INTRNL | ||
外接线图 | CONNECTION-DIAGRAM EXTRNL | ||
外部连接图 | EXTERNAL PARTS & CONNECTIONS | ||
空白铭牌 | BLANK NAMEPLATE | ||
单独包装的部件组合 | KIT PART-PACKED-SEPARATE | ||
纸箱标签 | LABEL CARTON | ||
警告标贴 | WARNING STICKER | ||
警告标签 | CAUTION LABEL | ||
电机鉴别号码 | WEBER GRAPHICS MOTOR IDENTIFICATION PART NUMBER | ||
开-关标签 | LABEL ON-OFF | ||
证书标签 | LABEL CERTIFICATION | ||
连接标签 | CONNECTION TAG | ||
接线片标签 | BONDING LUG STICKER | ||
标签 | LABEL BLANK BLUE / LABEL | ||
空白条形码 | STICKER BAR CODE BLANK | ||
保护器装配 | THERMOSTAT ASSEMBLY | ||
单个热保护器 | THERMOSTAT | ||
自动复位温度保护器 | THERMO AUTO RESET | ||
热保护器引线装配(2引线) | THERMOSTAT&LEAD ASSEMBLY | ||
温度保护器组装2(7AM) | THERMOSTAT ASSEMBLY 2(7AM) | ||
外部零件连接 | EXTERNAL-PARTS-CONNECTION | ||
压缩弹簧 | COMPRESSION SPRING | ||
电容夹 | CLAMP CAPACITOR | ||
支点盘 | PLATE PIVOT | ||
起动电容 | CAPACITOR START | ||
电容防护 | GUARD CAPACITOR | ||
保护器组件 | THERMOSTAT LEAD ASS. | ||
六角头自攻螺钉 | FORMING SCREW,EX | ||
螺钉端子 | TERMINAL SCREW TYPE | ||
螺钉组件 | SCREW -EYELET ASS. | ||
带六角垫圈螺钉 | SCREW HEX WASHER | ||
螺钉螺母组合 | STUD-NUT ASSEMBLY | ||
#8-32 牙镀锌六角螺母 | HEX NUT #8-32 ZINC PLATED | ||
端子螺钉组件 | TERMINAL & SCREW ASS. | ||
端盖螺钉装配 | END FRAME STUD ASSEMBLY | ||
六角头头部带槽带锁紧垫螺钉(接地螺钉) | SCREW HEX WASHER HEAD,THREAD FROM(GREEN) | ||
六角头头部带槽带平垫螺钉 | SCREW HEX WSHR HD THREAD FORMING | ||
开关触点 | CONTACT SWITCH | ||
开关臂 | BRACKET SWITCH ARM | ||
开关臂 | ARM SWITCH | ||
支撑 | SUPPORT CONTACT UPPER SGL | ||
支撑 | SUPPORT CONTACT | ||
开关装配 | SWITCH ASSEMBLY | ||
开关装配指导 | GOVERNOR ASSEMBLY INSTRUCTIONS | ||
开关绝缘板 | INSULATOR SWITCH | ||
离心开关装配 | GOVERNOR ASSEMBLY | ||
离心开关支撑 | GOVERNOR SUPPORT | ||
开关弹簧 | GOVERNOR SPRING | ||
插塞 | PLUG | ||
开关盘 | PLATE- SWITCH | ||
开关按钮 | BUTTON - SWITCH | ||
触点/刀片装配 | CONTACT& BLADE ASS. | ||
触点 | CONTACT | ||
开关刀片 | BLADE - SWITCH | ||
开关装配结构 | SWITCH ASS.INS. | ||
摇臂开关 | ROCKER ARMSWITCH | ||
货盘 | PALLET | ||
护盖 | PROTECTIVE CAP | ||
电镀挡板 | BAFFLE PLATED | ||
间隔 | SPACER PLASTIC | ||
管子 | TUBE | ||
轴承保持圈 | BEARING RETAINER | 磁石中药 | |
伸缩垫片 | EXPANSION WASHER | ||
金属圈 | EYELET | ||
自调心滑动轴承固定垫圈 | 0048 SELF ALIGNING SLEEVE BEARING CATCHER GASKET | ||
支撑衬垫 | SUPPORT PAD | ||
支撑衬垫组件 | KIT-SUPPORT PAD | ||
轴承衬套 | BEARING INSERT | ||
防松垫圈 | TYPE A INTERNAL TOOTH LOCKWASHER | ||
自锁垫圈 | LOCKWASHER | ||
抛油圈 | SLINGER | ||
锁紧垫圈 | LOCKWASHER BALL BRG | ||
塑壳 | CONNECTOR HOUSING | ||
接触圈 | RING CONTACT GOVERNOR | ||
刚性基座 | RIGID BASE | ||
内固定器件 | INTERNAL CATCHER | ||
端子板装配 | TERMINAL-BOARD ASS. | ||
浇注端子板 | MOLDED TERMINAL BOARD | ||
56轴承防尘盖 | 0056 CAP BRACKET | ||
48盖装配 | 0048 COVER ASY BKT | ||
48前盖垫片 | 0048 GASKET COVER FRONT END | ||
外部零件连接图 | EXTERNAL PARTS AND CONNECTIONS | ||
外部零件连接器 | EXTERNAL PARTS&CONNECTIONS | ||
56外齿锁紧垫圈 | 0056 LOCKWASHER SHAKEPROOF EXTERNAL SERRATED | ||
无引线连接器 | CONNECTOR-LEADLESS | ||
FRAME-STATOR-COIL1.125 | |||
保护(轴承) | SHIELD(BEARING) | ||
绝缘件 | INSULATOR | ||
衬垫 | SPACER (CONDENSER) | ||
主体(轴-S) | BODY(SHAFT-S) | ||
触点 | CONTACT | ||
锥形塞 | PLUG TAPERED | ||
| 音乐的英语 可回收货盘 | 0056RETURNABLE TRAY SQUARE FLANGE DESIGN | ||
铭牌打印指导 | NAMEPLATE PRINTING INSTRUCTIONS | ||
标签打印指导 | LABEL PRINGTING INSTRUCTIONS | ||
隔垫标签 | STICKER-SPACER PAD | ||
泡沫衬垫 | FRONT END CAP | ||
轴套管 | SHAFT TUBE | ||
UL论证字符 | MONOGRAM DETAIL | ||
CSA论证字符 | MONOGRAM DETAIL | ||
PACK CARTON 75 PER/5 LYR | |||
泡沫聚苯乙烯 | STYROFOAM BLOCK | ||
外包装盖 | LID CORRUGATED EXPORT | ||
硬纸货盘说明 | PACK CARTON EXPORT | ||
凸缘管 | TUBE EXPORT | ||
出口衬垫 | EXPORT PAD | ||
打印说明 | PRINTING INSTRUCTIONS | ||
硬纸箱说明 | CARTON INSTRUCTIONS | ||
纸箱包装说明 | CARTON ASSEMBLY INSTR | ||
使用标贴 | STICKER SERVICE | ||
节能标贴 | STICKER CONSERVATIONIST | ||
内纸箱 | CARTON AOS INNER | ||
外纸箱 | CARTON AOS OUTER | ||
端部槽楔衬垫(单片) | END WEDGE PAD 6" | ||
端部槽楔衬垫 | END WEDGE PAD 48 FR | ||
电机包装端帽 | MOTOR ENDCAP 48 FRAME | ||
出口货盘 | EXPORT PALLET | ||
出口货盘指导 | EXPORT PALLET INSTR | ||
引出线组件 | LEAD GROUP ASSEMBLY | ||
出口包装箱设置 | CELL SET-EXPORT | ||
出口隔离物 | EXPORT-PARTITION | ||
出口盘 | EXPORT TRAY | ||
| 带花的诗 | 外包装盘 | EXPORT TRAY | |
盖子(出口) | EXPORT LID | ||
本文发布于:2023-06-07 12:15:51，感谢您对本站的认可！
本文链接：https://www.wtabcd.cn/fanwen/fan/82/893770.html
版权声明：本站内容均来自互联网，仅供演示用，请勿用于商业和其他非法用途。如果侵犯了您的权益请与我们联系，我们将在24小时内删除。
| 留言与评论（共有 0 条评论） |
