吃什么能瘦脸
Sii-Neyrfor Turbodrills
Page126Copyright© 2004, Smith International Inc.
All rights rerved.
Esntial Glossary of Sii-Neyrfor® Acronyms
广西假期The Esntial Glossary of Sii-Neyrfor® Acronyms
Acronym Description
ABH Adjustable bent housing
AMB “Obsolete” designation for PDC thrust bearings. Re-designated: “PDC” BHA Bottomhole Asmbly.The portion of a drilling asmbly below the
drill pipe. It can be very simple, compod of only the bit and drill
collars, or it can be very complex and made up of veral drilling
tools.
BS Standard bearing ction with elastomer thrust bearings (Type 50 ud
in water bad muds and Type 20 ud in oil bad muds)
BSA Standard bearing ction with PDC thrust bearings
DLS Dog Leg Severity.Rate of deflection in a deviated well. Typically
expresd as deflection, in feet, per 100 feet of drilled length.
ELBS Extended Lower Bearing Stabilizer designed to protect output shaft
from abrasion wear
FBS Designation for Turbodrills incorporating a steerable bearing ction of
either the fixed or adjustable bent housing type.
SBS "Obsolete" -- Steerable bearing ction with gear coupling
LBS Lower bearing stabilizer. Rig interchangeable Turbodrill™ module in-
corporating the lower radial bearing and the Turbodrills lowermost sta-
bilizer. The lower bearing stabilizer is the bottommost Turbodrill™
module.
LCM Lost Circulation Material.Granular or fibrous materials that are
added to drilling fluids to retard or stop loss into porous or
fractured zones.
MK1 Designation for constant pressure drop turbine blade configuration.张勇背景
MK2 Designation for standard pressure profile turbine blade configuration.
(Pressure varies with blade speed, highest pressure drop at runway
speed)
MK3 Designation for pressure profile turbine blade configuration with
higher pressure drop per stage than the MK2 design.
NBS Near Bit Stabilizer. A specially designed stabilizer that minimizes
length between Turbodrill™ and bit. Near bit stabilizers feature a
lower box connection to accept standard pin up drill bits.
OBM Oil-Ba Mud. A drilling fluid in which oil is the continuous pha
and which contains from less than 2 percent and up to 5 percent
water.
步调一致
狮子座女和什么座最配PDC Polycrystalline Diamond Compact. An extremely hard, diamond badpass
material ud by Sii-Neyrfor® for construction of thrust bearings and
by bit manufacturers for PDC bit cutters.
PVU Pressure velocity unit (unit of measure for PDC thrust loading, maximum
is 3.0 in all but the 9-1/2" tools where it is 4.0)
Turbodrills Sii
-Neyrfor
Copyright© 2004, Smith International Inc. All rights rerved.Page 127
The Esntial Glossary of Sii-Neyrfor® Acronyms Acronym Description
STN Stabilized sleeve, (nipple), providing both stabilization and the connec-tion between turbine ctions.
试岗TER Turbodrill™ Equipment Request.An Sii-Neyrfor worksheet submitted by sales personnel to operational management as a preliminary request for
equipment and advi of anticipated operating environment for a pending
tool proposal.小微企业所得税优惠政策
TFA Total Flow Area. Pertaining to PDC drill bits:The area of bit water-
cours available for fluid and cooling flows.
TS1XL Extended length first, (T1), turbine ction, includes approximately
30% more turbine stages than typical T1 ctions.
TS2 Second turbine (power) ction in a direct drive Turbodrill™
TSB Balanced Turbodrill™ incorporating a top motor ction, (T1), bypass
directly to the annulus.
TSH Balanced Turbodrill™ incorporating a top motor ction, (T1), bypass
through a hollow turbine drive shaft to the drill bit
TSP Thermally stable PDC. A diamond bad cutter material incorporating higher resistance damage by differential thermal expansion than PDC. An alterna-
tive to PDC in high temperature environments.
UBD Underbalanced drilling.
WBM Water bad mud.
