CHIMEI INNO L U X DISPLAY CORPORATION
LCD MODULE
SPECIFICATION
Customer:
Model Name: AT043TN25 V.2
SPEC NO.: A043-25-TT-21
Date: 2010/05/14
Version: 01
■Preliminary Specification
□Final Specification
For Customer’s Acceptance
Approved by Comment
Approved by Reviewed by Prepared by
Joe Lin
2010/05/27
James Yu
Charlie Chou
2010/05/27
David Lee
2010/05/25
The copyright belongs to InnoLux. Any unauthorized u is prohibited.
CHIMEI INNO L U X
InnoLux copyright 2004
All rights rerved,
Copying forbidden.
Record of Revision
Version Revi Date Page Content Pre-spec .01 2010/05/14 Initial Relea.
The copyright belongs to CHIMEI InnoLux. Any unauthorized u is prohibited.
CHIMEI INNO L U X
Contents
1. General Specifications (1)
2. Pin Assignment (2)
2.1. T FT LCD Panel Driving Section (2)
3. Operation Specifications (4)
麻辣皮皮虾3.1. A bsolute Maximum Ratings (4)
3.2. T ypical operation conditions (5)
3.3 Backlight Driving Conditions (5)
3.4. P ower Sequence (6)
3.5. T iming Characteristics (7)
3.5.1. Timing Conditions (7)
3.5.2.Timing Diagram (8)
4. Optical Specifications ................................................................................. (9)
5. Reliability Test Items (13)
6. General Precautions (14)
7.1. Safety (14)
7.2. Handling (14)
7.3. Static Electricity (14)
7.4. Storage (14)
7.5. Cleaning (14)
7. Mechanical Drawing (15)
9. Package Drawing (16)
9.1. Packaging Material Table (16)
什么时候放孔明灯9.2. Packaging Quantity (16)
9.3. Packaging Drawing (17)
The copyright belongs to InnoLux. Any unauthorized u is prohibited.
1. General Specifications
No. Item Specification Remark
网络连接中断
1 LCD size 4.3 inch(Diagonal)
2 Driver element a-Si TFT active matrix
3 Resolution 480 × 3 (RGB) × 272
4 Display mode Normally White, Transmissive
5 Dot pitch 0.066(W) × 0.198(H) mm
6 Active area 95.04(W) × 53.856(H) mm
7 Module size 105.5(W) × 67.2(H) ×2.9(D) mm Note 1
8 Surface treatment Anti-Glare
9 Color arrangement RGB-stripe
10 Interface Digital
11 Backlight Power consumption TBD W(Typ.)
12 Panel Power consumption TBD W (Typ.)
13 Weight TBD (Typ.)
Note 1: Refer to Mechanical Drawing.
中国礼品大全
2. Pin Assignment
2.1. T FT LCD Panel Driving Section
FPC Connector is ud for the module electronics interface. The recommended model is “FH19SC-40S-0.5SH” manufactured by HIROSE.
Pin No. Symbol I/O Function Remark
1 V LED-P Power for LED backlight cathode
2 V LED+P Power for LED backlight anode
3 GND P Power ground
4 V DD P Power voltage
5 R0 I Red data (LSB)
6 R1 I Red data
难度系数7 R2 I Red data
8 R3 I Red data
9 R4 I Red data
仓鼠笼子
10 R5 I Red data
11 R6 I Red data
12 R7 I Red data (MSB)围棋怎么算赢
13 G0 I Green data (LSB)
14 G1 I Green data
15 G2 I Green data
16 G3 I Green data
17 G4 I Green data
18 G5 I Green data
19 G6 I Green data
2019大阅兵20 G7 I Green data (MSB)
