*RoHS Directive 2002/95/EC Jan 27 2003 including Annex
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications.
Electrical Characteristics 1三国演义小故事
Standard 200 to 100 K ohms Total ±5 %±0.25 %0.13 mm (0.005 in.) T.I.R..0.20 mm (0.008 in.) T.I.R.Shaft End Play ...................................................................................................0.25 mm (0.010 in.)
T.I.R.Shaft 0.13 mm (0.005 in.) T.I.R.Pilot 0.08 mm (0.003 in.) T.I.R.Backlash ............................................................................................................................1.0 ° maximum Weight ........................................................................................................................Approximately 19 Solder lugs or PC pins Soldering Condition
96.5Sn/3.0Ag/0.5Cu solid wire or no-clean
rosin cored wire; 370 °C (700 °F) max. for 3 conds
96.5Sn/3.0Ag/0.5Cu solder with no-clean flux; 260 °C (500 °F) max.
for 5 conds
Not Manufacturer’s name and part number, resistance value and
tolerance, linearity tolerance, wiring diagram, and date code.
Ganging (Multiple Section Potentiometers).....................................................................1 cup One lockwasher and one mounting nut is shipped with each potentiometer.Recommended Part Numbers
5.08(.200) 5.08(.200)
6.99(.275)
TOLERANCES: EXCEPT WHERE NOTED .51 .13DECIMALS: .XX ± (.02), .XXX ±
(.005)
FRACTIONS: ±1/64 MM DIMENSIONS:
(IN.)
SHAFT & BUSHING CONFIGURATIONS (Bushing - DxL, Shaft - D)
奖学金英语
宝宝多大能竖抱
(-1)Plastic Bushing (3/8 ” x 5/16 ”)
and Shaft (.2480 + .001, - .002)(-2)Metal Bushing (3/8 x 5/16 )
and Shaft (.2497 + .0000, - .0009)(-3)Sealed, Plastic Bushing (3/8 ” x 5/16 ”)
and Shaft (.2480 + .001, - .002)建国大业读后感
(-4)Sealed, Metal Bushing (3/8 ” x 5/16 ”)
and Shaft (.2497 + .0000, - .0009)
(-5)Metric, Plastic Bushing (9 mm x 7.94 mm)
and Shaft (6 mm + 0, - .076 mm)
(-6)Metric, Metal Bushing (9 mm x 7.94 mm)
and Shaft (6 mm + 0, - .023 mm)
(-7)Metric, Sealed, Plastic Bushing (9 mm x
胡编乱造
7.94 mm) and Shaft (6 mm + 0, - .076 mm)(-8)Metric, Sealed, Metal Bushing (9 mm x
7.94 mm) and Shaft (6 mm + 0, - .023 mm)
BOLDFACE LISTINGS ARE IN STOCK AND READILY AVAILABLE THROUGH DISTRIBUTION.FOR OTHER OPTIONS CONSULT FACTORY.RoHS IDENTIFIER:
L =COMPLIANT
蒲公英的功效与作用BLANK =NON-COMPLIANT
REV. 08/06
NOTE: For Anti-rotation pin add 91 after configuration dash number. Example: -2 becomes -291 to add AR pin.
客岁*R
o H S C O M P L I A N T V E R S I O N S A V A I L A B L E
苹果和安卓哪个好
