DuPont ™ Zytel ®
HTN
high performance polyamide resin
PRELIMINARY DATA
Zytel ®
HTNFR52G30NH NC010
Value DAM
Identification Part Marking Code ISO 11469>PA6T/66-GF30FR(40)<
Part Marking Code SAE J1344
>PPA-GF30FR<
Mechanical Stress at Break ISO 527MPa (kpsi)
150 (22) Strain at Break ISO 527% 2.2 Tensile Modulus ISO 527MPa (kpsi)10500 (1520) Flexural Modulus ISO 178MPa (kpsi)9000 (1300) Flexural Strength
ISO 178MPa (kpsi)230 (35)
Notched Charpy Impact Strength ISO 179/1eA
kJ/m 2
8
Thermal
Deflection Temperature ISO 75-1/-2
°C (°F)
1.80MPa
282 (540)
Melting Temperature ISO 11357-1/-3接受捐赠
°C (°F)
10°C/min, First Heat
310 (590)
Contact DuPont for Material Safety Data Sheet, general guides and/or additional information about ventilation, handling, purging, drying, etc.ISO Mechanical properties measured at 4.0mm, ISO Electrical properties measured at 2.0mm, and all ASTM properties measured at 3.2mm. Test temperatures are 23°C unless otherwi stated.
The above data are preliminary and are subject to change as additional data are developed on subquent lots.
The DuPont Oval Logo, DuPont™, The miracles of science™ and Zytel® are trademarks or registered trademarks of DuPont Company. Copyright© 2006.
060725/060725
The information provided in this data sheet corresponds to our knowledge on the subject at the date
自制饺子皮
of its publication. This information may be subject to revision as new knowledge and experience becomes available. The data provided fall within the normal range of product properties and relate only to the specific material designated; the data may not be valid for such material ud in combination with any other materials, additives or pigments or in any process, unless expressly indicated otherwi. The data provided should not be ud to establish specification limits or ud alone as the basis of design; they are not intended to substitute for any testing you may need to conduct to determine for yourlf the suitability of a specific material for your particular purpos. Since DuPont cannot anticipate all variations in actual end-u conditions DuPont makes no warranties and assumes no liability in connection with any u of this information. Nothing in this publication is to be considered as a
licen to operate under or a recommendation to infringe any patent rights. DuPont advis you to ek independent counl for a freedom to practice opinion on the intended application or end-u of our products. Caution: Do not u this product in medical applications involving implantation in the human body. For other medical applications e "DuPont Medical Caution Statement", H-50102.
Zytel ® HTNFR52G30NH NC010 is a 30% glass reinforced, flame retardant, lubricated high performance polyamide resin. It is also a PPA resin and is halogen-free.
Property
Test Method
Units
During molding, u proper protective equipment and adequate ventilation. Avoid exposure to fumes and limit the hold up time and temperature of the resin in the machine. Purge degraded resin carefully with HDPE.
Zytel ®
HTNFR52G30NH NC010
Value DAM李白的将进酒全诗
Electrical Surface Resistivity IEC 60093ohm >1E15 Volume Resistivity IEC 60093ohm m >1E13 Electric Strength IEC 60243-1kV/mm (V/mil)
2.0mm
26.0 (655)
Dielectric Constant ASTM D 2520 B
1 GHz 3.7 10 GHz 3.8
Dissipation Factor ASTM D 2520 B
E-4
1 GHz 110 10 GHz 100
CTI IEC 60112V
600
Flammability
Flammability Classification UL94
人面公仔
0.4mm V-0
怎么蒸蛋糕Oxygen Index
ISO 4589-1/-2%37
Glow Wire Flammability Index IEC 60695-2-12°C
蓝牙打不开0.75mm
960
Glow Wire Ignition Temperature IEC 60695-2-13
°C初二上册英语单词
0.75mm 725
Other Density
ISO 1183kg/m 3 (g/cm 3)
1440 (1.44)
Molding Shrinkage ISO 294-4祭奠父亲
%
Normal, 2.0mm 1.0 Parallel, 2.0mm
0.3Contact DuPont for Material Safety Data Sheet, general guides and/or additional information about ventilation, handling, purging, drying, etc.ISO Mechanical properties measured at 4.0mm, ISO Electrical properties measured at 2.0mm, and all ASTM properties measured at 3.2mm. Test temperatures are 23°C unless otherwi stated.
The above data are preliminary and are subject to change as additional data are developed on subquent lots.
The DuPont Oval Logo, DuPont™, The miracles of science™ and Zytel® are trademarks or registered trademarks of DuPont Company. Copyright© 2006.
060725/060725
The information provided in this data sheet corresponds to our knowledge on the subject at the date of its publication. This information may be subject to revision as new knowledge and experience becomes available. The data provided fall within the normal range of product properties and relate only to the specific material designated; the data may not be valid for such material ud in combination with any other materials, additives or pigments or in any process, unless expressly indicated otherwi. The data provided should not be ud to establish specification limits or ud alone as the basis of design; they are not intended to substitute for any testing you may need to conduct to determine for yourlf the suitability of a specific material for your particular purpos. Since DuPont cannot anticipate all variations in actual end-u conditions DuPont makes no warranties and assumes no liability in connection with any u of this information. Nothing in this publication is to be considered as a
licen to operate under or a recommendation to infringe any patent rights. DuPont advis you to ek independent counl for a freedom to practice opinion on the intended application or end-u of our products. Caution: Do not u this product in medical applications involving implantation in the human body. For other medical applications e "DuPont Medical Caution Statement", H-50102.
Property
Test Method Units
Zytel ®
HTNFR52G30NH NC010
Value
DAM Processing
Melt Temperature Range °C (°F)320-330 (610-625) Mold Temperature Range °C (°F)85-130 (185-265)
Drying Time, Dehumidified Dryer h 6-8 Drying Temperature °C (°F)100 (210) Air Dew Point
°C (°F)<-20 (<-4) Processing Moisture Content
%
<0.10
Contact DuPont for Material Safety Data Sheet, general guides and/or additional information about ventilation, handling, purging, drying, etc.ISO Mechanical properties measured at 4.0mm, ISO Electrical properties measured at 2.0mm, and all ASTM properties measured at 3.2mm. Test temperatures are 23°C unless otherwi stated.
The above data are preliminary and are subject to change as additional data are developed on subquent lots.
The DuPont Oval Logo, DuPont™, The miracles of science™ and Zytel® are trademarks or registered trademarks of DuPont Company. Copyright© 2006.
060725/060725
The information provided in this data sheet corresponds to our knowledge on the subject at the date of its publication. This information may be subject to revision as new knowledge and experience becomes available. The data provided fall within the normal range of product properties and relate only to the specific material designated; the data may not be valid for such material ud in combi
nation with any other materials, additives or pigments or in any process, unless expressly indicated otherwi. The data provided should not be ud to establish specification limits or ud alone as the basis of design; they are not intended to substitute for any testing you may need to conduct to determine for yourlf the suitability of a specific material for your particular purpos. Since DuPont cannot anticipate all variations in actual end-u conditions DuPont makes no warranties and assumes no liability in connection with any u of this information. Nothing in this publication is to be considered as a
licen to operate under or a recommendation to infringe any patent rights. DuPont advis you to ek independent counl for a freedom to practice opinion on the intended application or end-u of our products. Caution: Do not u this product in medical applications involving implantation in the human body. For other medical applications e "DuPont Medical Caution Statement", H-50102.
Property
Test Method Units
