Normes véhicules
B273620
AIR CONDITIONING–
HEATER UNIT
摩西十诫Page1/34
No u restriction
This is a translation,the French original shall be ud in all cas of litigation Date of Draft translation:16/02/2006
WARNING
This PSA norme has been translated by RHN/NCF into English using the automatic translation software Systran(approved by PSA).
The quality of this translation has not been technically validated by the PSA Technical Discipline proprietor of this norme.
This document is available on-line in"Normes"Intranet()as well as on the B2B portal (suppliers and industrial partners).
If a technical validation of this DRAFT is required,PLEASE request it from RHN NCF at the address below:
鸡新城疫的症状
Drafted by Checked by Approved by
Philippe VETTORETTO DPTA/DMOV/EQI/CLI Emmanuel BARBIER
手抄报阅读主题DPTA/DMOV/EQI/CLI
香奈儿包多少钱Maurice BELLAMOU
DPTA/DMOV/EQI/CLI
Date 05/01/2006Signature Date
05/01/2006
Signature Date
05/01/2006
Signature
RECORDS
Suffix Date Type of modification OR01/02/1985\*MERGEFORMAT Creation of the norme
A01/10/1993Rewritting of the norme
B12/09/1997Introduction of to IDEM(French only).
C23/06/2003Updating of the norme.
D02/02/2004Revision of paragraphs4.3and8.1
E01/02/2006Update according to heater unit technology.Evolution of§2,4,5,6,7,8,9,10 and appendix
PARTICIPANTS
The following persons took part in the drafting and/or checking of this norme: DPTA/DPMO/IAMT/CGOA Jean COMBES,Ludovic LEFEBVRE DPTA/DMOV/MON/MEM/IPSV Eric DESRUELLE
DPTA/DMOV/EQI/CLI Patrick SOUBISE
DMFV/RHN/NCF/ENV Guy DHENIN
CONTENTS
1.OBJECT AND FIELD OF APPLICATION6
2.REFERENCE DOCUMENTS6 2.1.NORMES6 2.2.REGULATIONS7 2.
3.OTHER DOCUMENTS7 2.
4.EXPRESSION ON DOCUMENTS7
2.4.1.Functional air-conditioning group drawing7
2.4.2.Supplier asmbled heater unit drawing7
2.4.
3.Technical sheets7关于中国的诗
3.TERMINOLOGY AND DEFINITION7 3.1.DEFINITIONS8
3.2.ACRONYMS8
4.GENERAL SPECIFICATIONS8
4.1.1.Approval of supplies8
4.1.2.Marking8
4.1.3.Delivery condition8
4.1.4.Recycling8
acknowledgements
5.TECHNICAL CHARACTERISTICS AND DESIGN9 5.1.DEFINITIONS9 5.2.DESIGN9
葫芦娃歌曲歌词
5.2.1.Internal cleanliness10
5.2.2.Behaviour to combustion10 5.3.ENDS11 5.4.APPEARANCE11
5.5.OBJECTIVE QUALITY11
6.CONDITIONS OF USE12 6.1.COOLING LIQUID12 6.2.ESTABLISHMENT12 6.3.TEMPERATURE12 6.4.PRESSURE12 6.5.FLOW12
6.6.SEALING OF INTERNAL CONNECTIONS12
7.GENERAL TEST CONDITIONS13
8.MECHANICAL CHARACTERISTICS13 8.1.RESISTANCE TO VIBRATIONS13 8.2.BEHAVIOUR UNDER VACUUM14 8.3.BEHAVIOUR UNDER STATIC PRESSURE14 8.4.FILLING TEST15 8.5.BEHAVIOUR TO ALTERNATE PRESSURE15 8.6.BEHAVIOUR TO GREAT FLOW16 8.7.NOISE LEVEL16
8.8.MECHANICAL RESISTANCE OF THE ASSEMBLY18
9.HYDRAULIC CHARACTERISTICS18 9.1.CALORIFIC POWER18 9.2.FLOW SATURATION19 9.3.HYDRODYNAMIC RESISTANCE20 9.4.TEMPERATURE HOMOGENEITY20 9.5.PRE-AGEING22 9.6.BEHAVIOUR TO AGEING22 9.7.BEHAVIOR AT HIGH TEMPERATURE22 9.8.OPERATION IN DEGRADED VEHICLE MODE(BREAKDOWN GMV,STOPPER VASE EXPANSION SEALED,BLOCKED THERMOSTAT,)23 9.9.BEHAVIOR TO THE IMPACTS23
9.9.1.At-30°C23
9.9.2.At23°C23 9.10.BEHAVIOUR TO THE THERMAL IMPACTS24
10.PHYSIO-CHEMICAL CHARACTERISTICS25 10.1.CHEMICAL NEUTRALITY25 10.2.PLASTIC PARTS25 10.3.RUBBER PARTS25 10.4.RESISTANCE TO CORROSION25
10.4.1.Resistance to internal erosion25
10.4.2.Resistance to external corrosion26 10.5.ODORS26
四懂四会10.5.1.Odor when new26
10.5.2.Odor during operation26
11.ENDURANCE ON VEHICLE27
1.OBJECT AND FIELD OF APPLICATION
This technical specification has as an objective to define the technical characteristics,the tests to be carried out and the results to obtain with the heater units delivered independently like for the heater units contained in the groups of air-conditioning.
The heater units carry out a heat exchange allowing the heating of the cockpit by reheating of the temperature of the air entering the group of air-conditioning.
2.REFERENCE DOCUMENTS
2.1.NORMES
A101100ADMINISTRATIVE TERMINOLOGY
A102250CODING OF THE COLOUR AND THE GRAIN OF PARTS OF APPEARANCE
B118030CODE MARKING OF THE DATE OF MANUFACTURE
B122620THERMOPLASTIC ENDS FOR COOLANT CIRCUIT
B122623METAL ENDS MOULDED OR MACHINED FOR COOLANT CIRCUITS
B122626ENDS TUBES FOR COOLANT CIRCUIT(STEEL OR ALUMINIUM)
B145800PROTECTIVE OIL
B155070COMPLEMENTARY ANTI-CORROSIVE LINING MACHINE PARTS UNDER ENGINE COWLING
B200110SUPPLIES OF PRODUCTS GENERAL SPECIFICATIONS
B200200DESIGN FOR RECYCLING
B200250MATERIAL REGULATED RESTRICTIONS OF USE IN GROUP PSA PEUGEOT CITROEN
B201315SUPPLIES OF PARTS OUT OF PLASTIC MARKING OF IDENTIFICATION OF THE MATERIALS FOR RECYCLING
B201415SUPPLY OF PARTS OUT OF RUBBER MARKING OF IDENTIFICATION OF THE MATERI
ALS FOR RECYCLING
B226120FAST CONNECTIONS FOR COOLANT CIRCUITS
B373625AIR-CONDITIONING HEATER UNITS MEASURES PERFORMANCES
B620020THERMOPLASTIC AND THERMOHARDENING MATERIALS DESIGNATION CONVENTIONAL
B630100VULCANIZED COMPACT RUBBERS CLASSIFICATION SYMBOLIZATION PROPERTIES B632100COMPACT RUBBERS MIXTURES OF CATEGORY2
B715110LIQUIDS OF COOLING CONCENTRATED OR DILUTED FOR THERMAL ENGINES
D171058MATERIALS AND COATINGS TEST OF SALT SPRAY5%NACL AND METHODS OF GRADING
D421235PLASTIC BEHAVIOR AND RUBBER PARTS WITH THE IMPACT(METHOD BY FALL OF MASS)
D471309MATERIALS AND PARTS OF AUTOMOBILE EQUIPMENT FOLLOWING AGEING CYCLES CLIMATIC GIVEN
R352001SPECIFICATION SAFETY REGULATION–GROUP COMMANDE–AIR-CONDITIONING FMVSS302NORME OF BEHAVIOUR TO COMBUSTION
DIN50018TEST SF W2OS
ISO16232ROAD VEHICLES:CLEANLINESS OF THE CIRCUIT COMPONENTS OF FLUID
