ብ
ቦ
ቧ
山地车骑行ቨ
ቩ
ቪቫ
ቭቮ
清朝为什么会灭亡ቯተባ
ቢ
ቱ
Measures to take before installation
橙字五笔怎么打
Do not open the cartons prior to installation. Store and climatize the unopened cartons inside. New constructions to be clod in with air conditioning or heating units during the winter months. Recommended room conditions for installation are 18°C (65 °F).
Important: Prior to installation, inspect the boards in daylight for any visible faults or damage and also check colour and structure. No claims are accepted once fl ooring boards have been installed.
Installation direction
The direction of laying normally depends on the main source of light fall in the room, e.g. French windows. The boards should run parallel with the entering light for best appearance. However, the proportions of the room can also be emphasized by skilled lection of the direction in which the laminate floor is laid. Light-coloured wood makes small rooms appear larger. In doorway and large areas over 10 m (33 ft.) in length and/or width an expansion joint must be allowed for long or wide. Apply an expansion moulding or cover strip over said expansion joint.
- E nsure that the boards are always laid lengthways in narrow hallways. - W hen installing T-, L- or U-shaped areas, parate the fl ooring area according to the room layout by using a proper profi le system.
开朗的近义词
Moisture check
The subfl oor must be checked for moisture by a CM measuring instrument.
Limit moisture content
Cement screed max. 2.0 CM-mass-%, underfloor heating 1.8 % CM, anhydride screed max. 0.5% CM-mass-%, underfl oor heating 0.3 % CM. When laying your fl oor over newly installed concrete screed or cast plaster subfl oors - after a curing time of at least 6 to 8 weeks – or over underfl oor heating, always u 0.2 mm (8 mils) thick PE film as an underlay for additional moisture protection. Overlap ams with 30 cm (12“) and tape. When laying your fl oor in rooms on or below grade, it is necessary that a state-of-the-art or DIN-compliant moisture barrier be installed. Installation over underfl oor heating烂开头的成语
请君试问东流水
When your fl oor is to be installed over underfl oor heating, the screed must be laid professionally as per German Standard DIN 18353. Plea ensure prior to installation that the underfl oor heating system has been laid in accordance with the DIN EN 1264 and DIN 4725 standards and that the heat-up record has been complied with to prepare the subfl oor for laying the fl oor covering. Detailed instructions on the installation over underfl oor heating can be obtained from your dealer.Ca
re
First care: Immediately after laying your new floor, you carry out fi rst treatment with Secura-A. Secura-A signifi cantly reduces the absorption of water during damp mopping and protects the ams and surface against moisture. To ensure a long lifetime of your fl oor, we recommend routine treatment with Secura-A once a year for intensive care.
Dry cleaning: It is usually absolutely suffi cient to clean your laminate fl oor dry using a mop, soft broom or vacuum cleaner. Heel streaks or grea stains can be removed with Stain Remover or acetone.
聚会Damp cleaning: We recommend damp mopping your surface regularly with Laminate Floor Cleaner. The frequency hereby depends on the wear and tear your fl oor is subjected to. Add about 150 ml (5 fl .oz.) of Laminate Floor Cleaner to 8-10 litres (2-2.5 gal) of water and wipe the fl oor with a well-wrung cloth. By buffi ng the treated surface dry with a Polishing Cloth you give your laminate fl ooring surface an even shine.
Plea not e: Do not u soap-bad det ergent s, abrasive cleaners, scouring powder, steel wool, wax or polish for cleaning and caring for your Laminate Floor. Always wring out the cloth or mop very
超越的英文well before wiping t he fl oor. Do not wet mop t he laminat e fl ooring surface and never leave puddles or standing water! Steam cleaning machines are not suitable for cleaning laminate fl ooring.
Room climate
What is good for people is also good for the high-grade woods of your laminate fl oor. At a room temperature of 20°C (68°F), a relative humidity of about 50–60% is felt to be pleasant. During the heating ason, this fi gure is often fallen below to a considerable extent. To prevent the wood from drying out, which may cau the development of smaller gaps between the fl ooring elements, it is advisable to u an humidifi er (evaporator), right from the beginning of the heating ason.
Preventive protection
To prerve the quality and beauty of your laminate fl oor we recommend using protective pads under chairs and furniture legs. Place quality walk-off mats at entrances, garages or baments to minimi tracked-in dirt, grit and moisture. Chair castors and offi ce roller chairs must comply with German Standard DIN 68131. U only lined rollers of type W (soft). It is also a good idea to u polycarbonate mats (from our range of accessories) for additional protection.
06/04 S ubject to modifi cation in the interest of technical development.
General information
Attention: Read thoroughly from beginning to end before installation!
