BDP-93 NE Self Upgrade Instruction
诗词大全
Here is the OPPO BDP-93
饱满的热情
文艺委员工作总结
First Step: Remove the screws at both sides of the machine.
哺乳假
中国的月亮
Second Step:Remove the highlighted screws and lift the cover from the machine.
Third Step: Remove the highlighted screws and the AC Socket by unclipping the highlighted plugs. Cut the highlighted zip-tie.
Fourth Step: Remove the AC Socket and the green OPPO board.
If you are not replacing the AC Socket with optional 3-pin Socket,
多多网
loon it so to allow for easy removal of the OPPO board.
Fifth Step: Remove the contents of the upgrade kit, including the rial-number sticker in the small bag. Note that the 3-pin AC Socket is optional. If you are using a tube preamp with no
ground, then you should request for the 3-pin AC Socket.
小学数学教材教法
Sixth Step: Install the NE board at the same spot and replace the original OPPO board. Replace all screws and plugs. Lastly, install the AC Socket, using the zip-tie to locate the cable. Seventh Step: Replace the top cover. The upgrade kit’s silver NE sticker is optional. If you choo to u it, place it on the front panel. Slowly peel off the label’s paper strip by following
the illustration below.
Final Step: Upgrade your OPPO’s firmware if a new version is available. Find Instructions at this link.
江南风景画/blu-ray-bdp-93/blu-ray-BDP-93-Support.aspx If you have questions or require additional information, contact Nuforce at
