3M ™Optically Clear Adhesives 8141•8142 •8161•9483
Product Description
3M™Optically Clear Adhesives:
8141
1.0 mil (25 microns) optically clear laminating adhesive for bonding smooth transparent substrates.
8142 2.0 mils (50 microns) optically clear laminating adhesive for bonding smooth or textured transparent substrates.8161 1.0 mil (25 microns) optically clear laminating adhesive for bonding smooth transparent substrates. Easy to convert with improved bubble resistance in lamination expod to high temperature and humidity.9483 5.0 mils (125 microns) optically clear laminating adhesive for bonding wide web (up to 48") applications and high stress laminates.Product Construction
3
P r o d u c t s 8141, 8142, 8161 d i s c o n t i n u e d .C
o n r e p r e s e n t a t i v e f o r s u g g e s t e d r e p l a c e m e n t p r o d u c t s .
3M ™Optically Clear Adhesives 8141•8142 •8161•9483
Typical Physical Properties and Performance Characteristics
Note:The following technical information and data should be considered reprentative or typical only and should not be ud
for specification purpos.(2)
Refractive Index:
(±
.0005 measured at 633 nm)
Haze:
Haze was measured according to ASTM D1003.
Transmission:ASTM E903, D1003, and E284Reflective-Corrected Total Luminous Transmittance vs Wavelength 3M™ Optically Clear Adhesive 8141
Wavelength (nm)T r a n s m i s s i o n %
3M™ Optically Clear Adhesive 8142
Wavelength (nm)
T r a n s m i s s i o n %
3M™ Optically Clear Adhesive 8161
Wavelength (nm)T r a n s m i s s i o n %
3M™ Optically Clear Adhesive 9483什么哲理
Wavelength (nm)
T r a n s m i s s i o n %
P r o d u c t s 8141, 8C o
l 3M r e p r e s e n t a t i v e f o r r o d u c t s .
3M ™Optically Clear Adhesives 8141•8142 •8161•9483
工作流程管理
(3)
Typical Physical Properties and Performance Characteristics (continued)
Note:The following technical information and data should be considered reprentative or typical only and should not be ud
for specification purpos.
Optical Performance to Environmental Conditions:
3M™Optically Clear Adhesives have withstood the following environmental tests conducted in the 3M laboratory under the conditions specified without any appreciable deterioration in visible appearance, physical integrity or optical performance. Over the entire test duration there was no significant change in transmission over the visible spectrum.
Peel Adhesion:ASTM D3330 modified, 90°peel
190 degree peel, 12 in./min. 305 mm/min. 2.0 mil polyester to various surfaces.2
90 degree peel, 12 in./min. 305 mm/min. 2.0 mil aluminum to various surfaces.两广小花猪
Shear Adhesion:
ASTM D-3654 Procedure H 1/2" x 1"Overlap, minutes to failure.
t s 8141, 81C o e n t a t i v e f o r s .
3M ™Optically Clear Adhesives 8141•8142 •8161•9483
(4)
Typical Physical Properties and Performance Characteristics (continued)
Note:The following technical information and data should be considered reprentative or typical only and should not be ud
for specification purpos.Chemical Resistance:
When properly applied, 3M™Optically Clear Adhesives can withstand splashes of numerous chemicals including acetone,isopropyl alcohol, and cleaners.Water Resistance:
Immersion in water has no appreciable effect on the bond strength at room temperature.Relative Temperature Resistance:Short Term High Temperature 350°F (177°C)Long Term High Temperature
寓言故事名字
185°F (85°C)明月逐人归
Long Term Low Temperature -40°F (-40°C)Shelf Life:Product retains its performance and properties for two years from date of manufacture if properly stored at room temperature conditions of 72°F (22°C) and 50 relative humidity. Storage in plastic bag is recommended.Available Sizes
Application Techniques
For maximum bond strength the surface should be thoroughly cleaned and dried. To obtain greatest benefit, laminations should be done in the cleanest environment possible with static charge elimination.
Bond strength can be improved with firm application pressure and moderate heat causing the adhesive to develop intimate contact with the bonding surface.
P r o d u c t s 8141, 8142, 8161 d i s c o n t i n u e d . r e p r e s e n t a t i v e f o r s u g g e s t e d r e p l a c e m e n
t p r o d u c t s .
3M ™Optically Clear Adhesives 8141•8142 •8161•9483(5)
黄瓜西红柿
西洋参治失眠General Information
•Light transmission >99% when corrected for reflection loss.•Haze level < 1%.
•Free of birefringence with no film carrier.•High temperature, humidity, and UV resistance.
•Long term durability without yellowing, delaminating, or degrading.
•High cohesive and peel strength for reliably bonding most transparent substrates.
•3M™Optically Clear Adhesives 8141, 8142 and 8161 are coated and converted in a clean room.
3M™Optically Clear Adhesive 9483 is coated using clean practices.•3M optically clear adhesives are inspected to reduce the occurrence of bubbles, dirt, gels and other optical distortions.•Wound on plastic cores and wrapped in plastic to eliminate paper fiber contamination.•Two film liners for optimum adhesive smoothness and differential relea for ea of processing and protection from contamination.•3M™Optically Clear Adhesives are available in other thickness. Plea contact 3M to discuss your application if you require a thickness that is not included in this data page.Application Ideas
•Touchscreens- for bonding film and glass laminates.•Transparent graphic overlays.•Projection screens.•Avionics/military displays.•Optical management films for LCD Processing:Laminating作文故事
Recommended nip roll or roller platen press type laminator to maintain optical aesthetics when laminated. Hand lamination not advid. U best process control standards possible to control variables. (See 3M Laminating Technical Bulletin for additional information.)Die-cutting
U high precision, tight tolerance tooling designed to cleanly cut film and pressure-nsitive adhesive.
P r o d u c t s 8141, 8142, 8161 d i s c o n t i n u e d .C
o
n t a c t y o u r l o c a l 3M r e p r e s e n t a t i v e f o r s u g g e s t e d r e p l a c e m e n t p r o d u c t s .
