焊接词典
乙炔 acetylene
电流安培 ampere
角焊 angle welding
电弧 arc读书活动方案
氩弧焊接 argon arc welding
光熔接条 bare electrode
对接焊接 butt welding
电弧弯曲 camber
阶叠熔接法 cascade
班级小游戏被覆熔接 clad weld
熔接 fusion welding订婚礼物
压接 pressure welding
焊接过程 welding process
焊接技术 welding technique
焊接工艺 welding technology/procedure
焊接操作 welding operation
焊接顺序 welding quence
焊接方向 direction of welding
焊接位置 welding position
熔敷顺序 build-up quence/deposition quence
焊缝倾角 weld slope/inclination of weld axis
焊缝转角 weld rotation/angle of rotation
平焊位置flat position of welding
横焊位置horizontal position of welding
立焊位置vertical position of welding
仰焊位置overhead position of welding
平焊downhand welding/flat position welding
横焊horizontal position welding
植物生长过程记录
立焊vertical position welding
仰焊overhead position welding
全位置焊all position welding：熔焊时，焊件接逢所处空间位置包括平焊、横焊、仰焊等位置所进行的焊接。如水平固定管所进行的环缝焊接
向下立焊vertical down welding/downward welding in the vertical position
向上立焊vertical up welding/upward welding in the vertical position
倾斜焊inclined position welding
上坡焊upward welding in the inclined position
下坡焊downward welding in the inclined position
对接焊butt welding
角焊fillet welding
搭接焊lap welding
船形焊fillet welding in the downhand position/fillet welding in the flat position
平角焊horizontal fillet welding
立角焊fillet welding in the vertical position
仰角焊fillet welding in the overhead position
坡口焊groove welding
I形坡口对接焊square butt welding
喇叭形坡口焊flare groove welding
卷边焊flanged edge welding
纵缝焊接welding of longitudinal am
横缝焊接welding of transver am
环缝焊接girth welding/ circumferential
螺旋缝焊接welding of spiral am/welding of helical am 环缝对接焊butt welding of circumferential am
定位焊tack welding
单面焊welding by one side
双面焊welding by both sides
单道焊single pass welding/single run welding
资本思维
怎么追巨蟹座女生多道焊multi-pass welding
单层焊single layer welding
多层焊multi-layer welding
分段多层焊block quence/ block welding
分层多道焊multi-layer and multi-pass welding
连续焊continuous welding
断续焊intermittent welding
打底焊backing weld
封底焊back aling weld
盖面焊cosmetic welding
深熔焊deep penetration welding
摆动焊welding with weaving/weave bead welding
前倾焊foreward welding (英国)/ forehand welding (美国)
模式英文后倾焊backward welding(英国)/ backhand welding(美国) 分段退焊backstep welding
跳焊skip welding
对称焊balanced welding/ balanced welding quence
左焊法leftward welding forehand welding
右焊法rightward welding/backhand welding
挑弧焊whipping method
自动焊automatic welding
手工焊manual welding/hand welding
车间焊接shop welding
工地焊接site welding(英国)/ field welding (美国)
广东游玩
拘束焊接restraint welding
堆焊surfacing/building up/overlaying
隔离层堆焊buttering
端部周边焊boxing/end return
返修焊rewelding
补焊repair welding
塞焊plug welding
槽焊slot welding
衬垫焊welding with backing
焊剂垫焊welding with flux backing
窄间隙焊narrow-gap welding
强制成形焊enclod welding
脉冲电弧焊puld are welding
电弧点焊arc spot welding
螺柱焊stud welding
热风焊hot gas welding
高能焊high grade energy welding
固态焊接solid-state welding
单面焊双面成形one-side welding with back formation 焊接条件welding condition
焊接工艺参数welding parameter
极性polarity
正接electrode negative/straight polarity
反接electrode positive/reverd polarity
运条方式manipulation of electrode
焊接电流welding current
焊接电流增加时间welding current upslope time
焊接电流衰减时间welding current downslope time
电流密度current density
短路电流short circuit current
脉冲电流pul level/pul current level
脉冲电流幅值pul current amplitude
基值电流background level
脉冲频率pul frequency
脉冲焊接电流占空比duty cycle of pul duration
电弧电压arc voltage
再引弧电压reignition voltage
