福尔摩斯的宿敌>著名数学家的故事The copyright belongs to InnoLux. Any unauthorized u is prohibited.
INNO L U X DISPLAY CORPORATION
LCD MODULE
SPECIFICATION
Customer: Model Name: AT070TN94
SPEC NO.: A070-94-TT-01 Date: 2009/07/07 Version:
01
■Preliminary Specification □Final Specification
For Customer ’s Acceptance
Approved by
对比图怎么做>想生第二胎
Comment
Approved by
Reviewed by Prepared by
Joe Lin
2009/07/07
James Yu
2009/07/07
David Lee
2009/07/07
聯凱光電
InnoLux copyright 2004
All rights rerved,
Copying forbidden.
Record of Revision
Version Revi Date Page Content
Pre-Spec.01 2009/07/07 Initial Relea
The copyright belongs to InnoLux. Any unauthorized u is prohibited.
I NNO L U X
Contents
1. General Specifications (1)
2. Pin Assignment (2)
3. Operation Specifications (5)
3.1. Absolute Maximum Rating (5)
3.1.1. Typical Operation Conditions (6)
毛尖蘑
3.1.2. Current Consumption (7)
3.1.3. Backlight Driving Conditions (7)
3.2. Power Sequence (8)
3.3. Timing Characteristics (9)
3.3.1. AC Electrical Characteristics (9)
3.3.2. Data Input Format (10)
3.3.3. Timing (11)
4. Optical Specifications (12)
5. Reliability Test Items (16)
6. General Precautions (17)
6.1. Safety (17)
6.2. Handling (17)
6.3. Static Electricity (17)
6.4. Storage (17)
6.5. Cleaning (17)
7. Mechanical Drawing (18)
8. Package Drawing (19)
8.1 Packaging Material Table (19)
8.2 Packaging Quantity (19)
8.3 Packaging Drawing (20)
The copyright belongs to InnoLux. Any unauthorized u is prohibited.
1. General Specifications
No. Item Specification Remark
1 LCD size 7.0 inch(Diagonal)
2 Driver element a-Si TFT active matrix
3 Resolution 800 × 3(RGB) × 480
4 Display mode Normally White, Transmissive
5 Dot pitch 0.0642(W) × 0.1790(H) mm
6 Active area 154.08(W) × 85.92(H) mm
7 Module size 164.9(W) ×100.0(H) ×5.7(D) mm Note 1
8 Surface treatment Anti-Glare
9 Color arrangement RGB-stripe
10 Interface Digital
虎口痣11 Backlight power consumption 1.674W (Typ.)
12 Panel power consumption 0.226W (Typ.)
13 Weight (150g) (Typ.)
Note 1: Refer to Mechanical Drawing.
2. Pin Assignment
TFT LCD Panel Driving Section
FPC Connector is ud for the module electronics interface. The recommended model is FH12A-50S-0.5SH manufactured by Hiro.
原生态唱法
Pin No. Symbol I/O Function Remark
1 V LED+P Power for LED backlight (Anode)
2 V LED+P Power for LED backlight (Anode)
3 V LED-P Power for LED backlight (Cathode)
4 V LED-P Power for LED backlight (Cathode)
5 GND P Power ground
6 V COM I Common voltage
7 DV DD P Power for Digital Circuit
古代法律8 MODE I DE/SYNC mode lect Note 1
9 DE I Data Input Enable
10 VS I Vertical Sync Input
11 HS I Horizontal Sync Input
12 B7 I Blue data(MSB)
13 B6 I Blue data
14 B5 I Blue data
15 B4 I Blue data
16 B3 I Blue data
17 B2 I Blue data
18 B1 I Blue data Note 2
19 B0 I Blue data(LSB) Note 2
20 G7 I Green data(MSB)
21 G6 I Green data
22 G5 I Green data
23 G4 I Green data
24 G3 I Green data
25 G2 I Green data
26 G1 I Green data Note 2
27 G0 I Green data(LSB) Note 2
28 R7 I Red data(MSB)
29 R6 I Red data
30 R5 I Red data
31 R4 I Red data
32 R3 I Red data
33 R2 I Red data
34 R1 I Red data Note 2
35 R0 I Red data(LSB) Note 2
36 GND P Power Ground
37 DCLK I Sample clock Note 3
38 GND P Power Ground
39 L/R I Left / right lection Note 4,5
40 U/D I Up/down lection Note 4,5
41 V GH P Gate ON Voltage
42 V GL P Gate OFF Voltage
43 AV DD P Power for Analog Circuit
44 RESET I Global ret pin. Note 6
45 NC - No connection
46 V COM I Common Voltage
47 DITHB I Dithering function Note 7
48 GND P Power Ground
49 NC - No connection
50 NC - No connection
I: input, O: output, P: Power
Note 1: DE/SYNC mode lect. Normally pull high.
When lect DE mode, MODE=”1”, VS and HS must pull high.
When lect SYNC mode,MODE= ”0”, DE must be grounded.
Note 2: When input 18 bits RGB data, the two low bits of R,G and B data must be grounded.
Note 3:Data shall be latched at the falling edge of DCLK.
