The copyright belongs to InnoLux. Any unauthorized u is prohibited.
4级考试时间>露齿笑INNO L U X DISPLAY CORPORATION
LCD MODULE
SPECIFICATION
Customer: Model Name: AT070TN92
SPEC NO.: A070-92-TT-01 Date: 2009/01/12 Version:
01
补肾食物排行榜10强■Preliminary Specification □Final Specification
For Customer ’s Acceptance
Approved by
Comment
Approved by
Reviewed by
Prepared by
Joe Lin
2009/02/12
James Yu
Jack Huang
Charlie Chou
2009/02/12
David Lee
2009/02/11
InnoLux copyright 2004
All rights rerved,
冠军销售Copying forbidden.
Record of Revision
Version Revi Date Page Content
Pre-Spec.01 2009/01/12 Initial Relea
The copyright belongs to InnoLux. Any unauthorized u is prohibited.
I NNO L U X
Contents
1. General Specifications (1)
2. Pin Assignment (2)
3. Operation Specifications (5)
3.1. Absolute Maximum Rating (5)
3.1.1. Typical Operation Conditions (6)
3.1.2. Current Consumption (7)
3.1.3. Backlight Driving Conditions (7)
3.2. Power Sequence (8)
3.3. Timing Characteristics (9)
3.3.1. AC Electrical Characteristics (9)
3.3.2. Data Input Format (10)
3.3.3. Timing (11)
4. Optical Specifications (12)
5. Reliability Test Items (16)
商品库存
6. General Precautions (17)
6.1. Safety (17)
6.2. Handling (17)
6.3. Static Electricity (17)食组词
6.4. Storage (17)
6.5. Cleaning (17)
7. Mechanical Drawing (18)
8. Package Drawing (19)
8.1 Packaging Material Table (19)
8.2 Packaging Quantity (19)
8.3 Packaging Drawing (20)
The copyright belongs to InnoLux. Any unauthorized u is prohibited.希望歌曲
1. General Specifications
No. Item Specification Remark
1 LCD size 7.0 inch(Diagonal)
2 Driver element a-Si TFT active matrix
鲷鱼的做法
3 Resolution 800 × 3(RGB) × 480
4 Display mode Normally White, Transmissive
5 Dot pitch 0.0642(W) × 0.1790(H) mm
6 Active area 154.08(W) × 85.92(H) mm
7 Module size 164.9(W) ×100.0(H) ×5.7(D) mm Note 1
8 Surface treatment Anti-Glare
9 Color arrangement RGB-stripe
10 Interface Digital
11 Backlight power consumption TBD
12 Panel power consumption TBD
13 Weight TBD
Note 1: Refer to Mechanical Drawing.
2. Pin Assignment
TFT LCD Panel Driving Section
FPC Connector is ud for the module electronics interface. The recommended model is FH12A-50S-0.5SH manufactured by Hiro.
Pin No. Symbol I/O Function Remark
1 V LED+P Power for LED backlight (Anode)
2 V LED+P Power for LED backlight (Anode)
3 V LED-P Power for LED backlight (Cathode)
4 V LED-P Power for LED backlight (Cathode)
5 GND P Power ground
6 V COM I Common voltage
7 DV DD P Power for Digital Circuit
8 MODE I DE/SYNC mode lect Note 1
9 DE I Data Input Enable
10 VS I Vertical Sync Input
11 HS I Horizontal Sync Input
12 B7 I Blue data(MSB)
13 B6 I Blue data
14 B5 I Blue data
15 B4 I Blue data
16 B3 I Blue data
17 B2 I Blue data
18 B1 I Blue data Note 2
19 B0 I Blue data(LSB) Note 2
20 G7 I Green data(MSB)
21 G6 I Green data
22 G5 I Green data
23 G4 I Green data
24 G3 I Green data
25 G2 I Green data
