Centrifugal fan
A centrifugal fan (also squirrel-cage fan, as it looks like a hamster wheel) is a mechanical device for moving air or gas. It has a fan wheel compod of a number of fan blades, or ribs, mounted around a hub. As shown in Figure 1, the hub turns on a driveshaft that pass through the fan housing. The gas enters from the side of the fan wheel, turns 90 degrees and accelerates due to centrifugal force as it flows over the fan blades and exits the fan housing.
Centrifugal fans can generate pressure ris in the gas stream. Accordingly, they are well-suited for industrial process and air pollution control systems. They are also common in central heating/cooling systems.
1. Fan components
The major components of a typical centrifugal fan include the fan wheel, fan housing, drive mechanism, and inlet and/or outlet dampers.
2. Types of drive mechanisms
The fan drive determines the speed of the fan wheel (impeller) and the extent to which this speed can be varied. There are three basic types of fan drivers.
2.1 Direct drive
The fan wheel can be linked directly to the shaft of an electric motor. This means that the fan wheel speed is identical to the motor’s rotational speed. With this type of fan drive mechanism, the fan speed cannot be varied unless the motor speed is adjustable.
2.2.1 Belt drive
Belt drive fans u multiple belts that rotate in a t of sheaves mounted on the motor shaft and the fan wheel shaft.
This type of drive mechanism is depicted in figure 2. The belts transmit the mechanical energy from the motor to the fan.
The fan wheel speed depends upon the diameter of the motor sheave to the diameter of the fan wheel sheave and can be obtained from this equation:
Where:
= fan wheel speed, revolutions per minute
= motor nameplate speed, revolutions per minute
= diameter of the motor sheave
= diameter of the fan wheel sheave
Fan wheel speeds in belt-driven fans are fixed unless the belts slip. Belt slippage can reduce the fan wheel speed veral hundred revolutions per minute (rpm).
2.2 Variable drive
Variable drive fans u hydraulic or magnetic couplings (between the fan wheel shaft and
the motor shaft) that allow control of the fan wheel speed independent of the motor speed. The fan speed controls are often integrated into automated systems to maintain the desired fan speed.
An alternate method of varying fan speed is by u of an electronic variable-speed drive which controls the speed of the motor driving the fan. This offers better overall energy efficiency at reduced speeds than mechanical couplings.
2.3 Fan dampers
Fan dampers are ud to control gas flow into and out of the centrifugal fan. They may be installed on the inlet side or on the outlet side of the fan, or both. Dampers on the outlet side impo a flow resistance that is ud to control gas flow. Dampers on the inlet side are designed to control gas flow and to change how the gas enters the fan wheel.
Inlet dampers reduce fan energy usage due to their ability to affect the airflow pattern into the fan.
3. Backward-curved blades
Backward-curved blades, as in figure 3(b), u blades that curve against the direction of the fan wheel’s rotation. The backward curvature mimics that of an airfoil cross ction and provides good operating efficiency with relatively economical construction techniques. The types of fan wheels are ud in fans designed to handle gas streams with how to moderate particulate loadings. They can be easily fitted with wear protection but certain blade curvatures can be prone to solids build-up.
Backward curved fans can have a high range of specific speeds but are most often ud for medium specific speed application—high pressure, medium flow applications.
Backward-curved fans are much more energy efficiency than radial blade fans and so, for high horpower applications may be a suitable alternative to the lower cost radial bladed fan.
4. Straight radial blades
Radial fan blades, as in figure 3(c), extend straight out from the hub. A radial blade fan wheel is often on particular-laden gas streams becau it is the least nsitive to solids build-up on the blades, but it is often characterized by greater noi output. High speeds, low volumes, and high pressure are common with radial fans, and are often ud in vacuum cleaners, pneumatic conveying systems, and similar process.
5. Centrifugal fan ratings
