SS-T Series CS-2460 09/01/06
Page 1 of 2
Features
•Sleek, low-profile, stylish design.
•State-of-the-art thermistor technology for fast respon.
•SS-TR rate-of-ri model: 15°F (8.3°C)per minute.
•SS-T fixed heat, Factory pret at 135°F (57°C).
•SS-TH high temperature model of 190°F (88°C).
•Addressable by devices via decade address switches.
•Rotary, decimal addressing (1 – 99)•Two-wire SLC connection.
•Visible LEDs “blink” every time the unit is addresd.
•360°-field viewing angle of the visual alarm indicators (two bicolor LEDs).LEDs blink green in Normal condition and turn on steady red in Alarm.•Integral communications and built-in device-type identification.
•Remote test feature from the panel.•Built-in functional test switch activated by external magnet.•Low standby current.
•Built-in tamper-resistant feature.
•Designed for direct-surface or electrical-box mounting.
•Sealed against back pressure.
•Plugs into parate ba for ea of installation and maintenance. Separate ba allows interchange of photoelec-tric, ionization and thermal nsors.•SEMS screws for wiring of the parate ba.
•Constructed of off-white Bayblend®,designed to commercial standards, and offers an attractive appearance.•94-5V plastic flammability rating.•Remote LED output connection to
optional RA400Z remote LED annuncia-tor.
•Optional sounder, relay, and isolator bas.
•Optional recesd (RMK400) or surface (SMK400) ba mounting kits.
Listings
Listings and approvals below apply to the SS-T Series of intelligent, address-able thermal (heat) detectors. In some cas, certain detectors may not be listed by certain approval agencies, or listing may be in process. Consult factory for latest listing status.
• UL Listed: file S2527.
• CSFM approved: file 3240-1288:166.• MEA approved: file 383-02-E Vol. V.
Description
Gamewell’s Smart Scan TM intelli-gent plug-in smoke detectors with integral communication provide features that surpass conven-tional detectors. Detector nsi-tivity can be programmed in the control panel software. Sensitiv-ity is continuously monitored and
reported to the panel. Point ID capability allows each detector’s address to be t with decade
address switches, providing exact detector locations for lective maintenance and troubleshooting. SS-T Series thermal detectors u an innovative ther-mistor nsing circuit to produce 135°F/57°C fixed-temperature (SS-T ) and rate-of-ri thermal detection (SS-TR ) in a low-profile package. SS-TH provides fixed high-temperature detection at 190°F/88°C in a low-profile package as well. The thermal detectors provide cost effective, intelligent property protection in a vari-ety of applications. SS-T Series addressable detectors are compatible with Gamewell’s 602, 610, 632, 654 and 658 addressable fire alarm control panels with a Smart Scan TM SLC.
Installation
The SS-T Series of plug-in intelligent, addressable thermal detectors u a pa-rate ba to simplify installation, rvice, and maintenance. Installation instruc-tions are shipped with each detector.
Mount ba (all ba types) on an electrical backbox which is at least 1.5" (3.81cm) deep. Suitable back boxes include:• 4.0" (10.16 cm) square box.
• 3.5" (8.89 cm) or 4.0" (10.16 cm) octagonal box.•Single-gang box (except relay or isolator ba).
•With B501BH or B501BHT ba, u a 4.0" (10.16 cm) square box.•With B224RB or B224BI ba, u a 3.5" (8.89 cm) or 4.0" (10.16 cm) oc-tagonal box, or a 4.0" (10.16 cm) square box.
NOTES: 1) Becau of the inherent supervision provided by the SLC loop, end-of-line resis-tors are not required. Wiring “T-taps” or branches are permitted for Style 4 (Class “B”) wiring.2) When using relay or sounder bas , consult the SS-LI data sheet for device limitations between isolator modules and isolator bas.
Applications
U thermal detectors for protection of property. For further information, go for manual I56-407-00, Applications Manual for System Smoke Detectors, which provides detailed information on detector spacing, place-ment, zoning, wiring, and special applications.
Bayblend® is a registered trademark of Bayer Corporation.6936pho1.jpg
SS-T in SS-B6 ba
SS-T Series
Intelligent Addressable Plug-In Thermal (Heat) Detectors
SS-T Series CS-2460 09/01/06
Page 2 of 2
Gamewell-FCI 12 Clintonville Road Northford, CT 06472-1610Phone: 203-484-7161Fax: A Honeywell Company © 2006 Gamewell-FCI
Product Line Information
Wiring Diagrams
Size
2.1" (5.3 cm) high x 4.1" (10.4 cm)diameter installed in B501 ba, 6.1"(15.5 cm) diameter installed in SS-B6ba.
Shipping weight 4.8 oz. (137 g).
Operating temperature range
SS-T, SS-TR: –20°C to 38°C (–4°F to 100°F)
SS-TH: –20°C to 66°C (–4°F to 150°F).
Detector spacing
UL approved for 50 ft. (15.24 m) center
to center. FM approved for 25 x 25 ft.(7.62 x 7.62 m) spacing.
Relative humidity
10% – 93% noncondensing.
Thermal ratings
Fixed-temperature tpoint 135°F (57°C),rate-of-ri detection 15°F (8.3°C) per minute, high temperature heat 190°F (88°C).
ELECTRICAL SPECIFICATIONS:Voltage range
15 - 32 volts DC peak.
Standby current (max. avg.)
200 µA @ 24 VDC (without communica-tion); 300 µA @ 24 VDC (one communi-cation every 5 conds with LED en-abled).
LED current (max.)
6.5 mA @ 24 VDC (“ON”).BASES AVAILABLE:
SS-B6: 6.1" (15.5 cm) diameter.B501: 4.1" (10.4 cm) diameter.B501BH or B501BHT: Sounder ba asmbly. Includes B501 ba.
B224RB Relay Ba: Screw terminals:up to 14 AWG (2.0 mm²). Relay type:Form-C. Rating: 2.0 A @ 30 VDC
resistive; 0.3 A @ 110 VDC inductive; 1.0A @ 30 VDC inductive. Dimensions: 6.2"(15.748 cm) x 1.2" (3.048 cm).
B224BI Isolator Ba: Dimensions: 6.2"(15.748 cm) x 1.2" (15.748 cm). Maxi-mum: 25 devices between isolator
bas. See Note 2 under Installation on page 1.
SS-T : Intelligent, addressable thermal detector. Must be mounted to one of the bas listed below.
SS-TR : Same as SS-T with rate-of-ri feature.
SS-TH : Intelligent, addressable high-temperature thermal (190°F/88°C) detector.Bas:
SS-B6: Standard U.S. low-profile ba, UL Listing.
B501BP : Standard European flangeless ba, pkg. of 10.
B501BH : Sounder ba, includes B501ba above.
B501BHT : Same as B501BH, but includes temporal sounder.
B224RB : Intelligent relay ba.
B224BI : Intelligent isolator ba. Isolates SLC from loop shorts.
Accessories:
RA400Z : Remote LED annunciator. 3 – 32VDC. Fits U.S. single-gang electrical box.Supported by SS-B6 and B501 bas only.SMK400: Surface mounting kit provides for entry of surface wiring conduit. For u with B501 ba only .
RMK400: Recesd mounting kit. For u with B501 ba only .
SMB600: Surface mounting kit for u with
Address dial on back of detector.
SS-B6.
BCK-200B : Black detector covers, box of 10.
M02-04-01: Test magnet.
M02-09-00: Test magnet with telescope stick.
XR2B : Detector removal tool. Allows
installation and/or removal of SS-T Series thermal detector heads from ba in high ceiling installations.
T55-127-000: Detector removal tool without pole.
XP-4: Extension pole for XR2B. Comes in three 5-ft. ctions.
Detector Guards:NOTE: The following guards are not UL listed with the SS-T detectors. Consult with AHJ.STI 9601: Low-profile, flush-mount smoke detector guard, wire.
STI 9602: Low-profile, surface-mount, smoke detector guard, wire.
STI 9609: High-profile, flush-mount, smoke detector guard, wire.
STI 9605: High-profile, surface-mount, smoke detector guard, wire.
STI 9604: Flush-mount heat detector guard, wire.
STI 9610: Surface-mount heat detector guard, wire.
STI-8200-SS : Flush-mount stainless steel smoke detector guard
STI-8230-SS : Surface-mount stainless steel smoke detector guard
