测量工具中英文对照表
测量工具中英文对照表.txt“我羡慕内些老人 羡慕他们手牵手一直走到最后。━交话费的时候,才发现自己的话那么值钱。heodolite 经纬仪
Water Level 水位仪
Level Ruler 水平尺
Casing gradienter
Coating thickness Measurer 涂层测厚仪
Ultrasonic thickness measurer 超声波测厚仪
Ultrasonic crack detector 超声波裂纹测试仪
Digital thermometer 数字温度计
radiation thermometer 辐射温度计
Gradient Reader 坡度读数器
Electric spark leak hunter 电火花追踪器
Volometer 万用表
MegaOhmmeter 兆欧表
Earthing resistance Reader 接地电阻读数表
Plug gauge 圆柱塞规
Magnifying glass 放大镜
Plummet 铅锤
Profile projector 投影仪
Pin Gauge 针规(不知道和plug gauge 的区别在哪里,知道的请指正)
Gauge block 块规
Bore gauge 百分表
A vernier caliper 游标卡尺
Coordinate Measureing Machine(CMM) 三尺元
Pressure gague寸压力计
+
电度厚度测试仪(Electroplating THK.Tester)
转(扭)力仪(Twisting Meter)
螺纹规(Thread Gauge)
块规(Block Gauge)
环规(Ring Gauge)
力矩计(Torque Meter)
塞规(Plug gage)
高度仪(Altitude gauge)
塞尺/间隙规(Clearance gauge)
千分卡尺(Micrometer Calipers )
“过” -- “不过” 验规(通-止规) [go-no-go gauge]
游标卡尺(Vernier Caliper)
电子卡尺(Digital caliper)
深度千分尺(Depth Micrometer)
销(针)规(Pin Gauge)
投影仪(Projector )
数字高度测量仪(Digital Height Gauge)
表面处理测试仪(Surface Finish Tester)
内/外径千分尺(Inside/outer Micrometer)
洛(威)氏硬度仪[(HRC/HV) Hardness Tester)]
温度计(Thermometer)
孔规(Bore Gauge)
电子称(Electric/digital Balance)
三坐标测试仪 (CMM)
万用表(Multimeter)
1.刀口型直尺:knife straigjht edge
2.刀口尺: knife straigjht edge
3.三棱尺three edges straigjht edge
4.四棱尺four edges straigjht edge
5.条式和框式水平仪
bar form and square levels
6.合像水平仪 imaging level meter
7铸铁平板 cast iron surface plate
8.岩石平板 granite surface plate
9.铸铁平尺cast iron straigjht edge
10.钢平尺和岩石平尺
steel and granite straigjht edge
11.圆度仪 roundness measuring instrument
12.电子水平仪electronic level meter
13.表面粗糙度比较样块铸造表面 roughness comparison specimens cast surface
14.表面粗糙度比较样块磨、车、铣、插及刨加工表面
roughness comparison specimens-ground,turned,bored,milled,shape and planed
15.表面粗糙度比较样块电火花加工表面
roughness comparison specimens spark-erostion machining surfaces
16.表面粗糙度比较样块抛光加工表面
roughness comparison specimens pollshed surfaces
17.接触式仪器的标称特性
18.轮廓profile
s
19.轨迹轮廓 traced profile
20.基准轮廓 reference profile
21.总轮廓 total profile
22.原始轮廓 primary profile
23.残余轮廓residual profile
24.触针式仪器stylus instrument
25.感应位移数字存储触针式量仪displacement nsitive,digitally storing stylus instrument
26.触针式仪器的部件stylus instrument components
27.测量环measurement loop
28.导向基准renfence guide
29.驱动器drive unit
30.测头(传感器)probe(pick-up)
31.拾取单元tracing element
32.针尖stylus tip
33.转换器transducer
34.放大器amplifier
35.模/数转换器analog-to-digital converter
36.数据输入data input
37.数据输出data output
38.轮廓滤波和评定profile filtering and evaluation
39.轮廓记录器profile recorder
40.仪器的计量特性metrological characteristics of the instrument
41.静测力的变化change of static measuring force
42.静态测力 static measuring force
43.动态测量力 dynamic measuring force
44.滞后hysteresis
45.测头的测量范围 transmission function for the sine waves
46.仪器的测量范围measuring range of the instrument
47.模数转换器的量化步距quantization step of the ADC
48.仪器分辨力 instrument resolution
49.量程分辨力比range-to-resolution ratio
50.测头线性偏差probe linearity deviation
51.短波传输界限short-wave transmission limitation
52.轮廓垂直成分传输 vertical profile component transmission
53表面粗糙度比较样块抛丸、喷砂加工表面
roughness comparison specimens shot blasted and blasted surfaces
54产品结构几何量计术规范(GPS)geometrical product specifications(GPS)
55表面结构 surface texture
56接触式仪器的标称特性 nominal characteristics of contact instruments
57公法线千分尺micrometer for mearsuring root tangent lenghths of gear teeth
58最大允许误差 maximum permissible error
59圆柱直齿渐开线花键量规 gauges for straight cylindrical involute splines