Technical Metal Industrial Co. L.L.C.
Tel: +971 (2) 5502025 Fax: +971 (2) 5502024 P.O. Box: 肠胃炎可以吃什么水果
41558
Abu Dhabi
Tel: +971 (4) 8858036
Fax: +971 (4) 8858658
P.O. Box: 86029
Dubai
Tel: +971 (3) 7224768
Fax: +971 (3) 7224769
P.O. Box: 99155
Al Ain
Tel: +971 (7) 2282332
Fax: +971 (7) 2282232
P.O. Box: 33239
Ras Al khaimah
E-mail:*******************:
I ntroduction
All wall tie’s manufacturing complies with BS EN 845-1:2003 (formerly BS 1243). A quick quotation and prompt delivery is available from stock of standard tie. As for our custom designed ties, an advanced information submittal is required for quick deliveries.
TMI is well equipped for manufacturing wall ties and meeting any challenge in the construction industry. TMI manufactures a wide range of wall ties in galvanized steel and stainless steel of grades S304 and S316.
The range of TMI ’s accessories from the standard ties, to its specialty, the custom designed ties are available to suit most engineering applications such as masonry to masonry, masonry to concrete, masonry to overhead structure and masonry to steel structures.
TMI has been in the business of manufacturing and supplying a wide range of building accessories for the&n怎么做鸡蛋汤
bsp; construction industry since 1997. With continued process improvement and new innovative product development, TMI is proud to deliver any quantity of its high quality and great valued products, with excellent rvice and punctuality to its customers.
Movement ties are designed to restrain masonry against lateral wind loads, allowing a horizontal expansion or contraction. Movement ties are ud where masonry restrained to steel work and in long
span masonry where movement joints are required.
Movement ties are held in the brick or block work. The debonding sleeve provided on plain end of the tie will rve to allow the movement. T经典乱伦小说
MI recommends the debonding sleeve to be installed with a
gap of 10mm at the end to allow for expansion or contraction.
LPSW
with sleeves
DB枇杷的作用
S
LPSW-ST
L-Plain tie slot with
sleeves
PTSW
with sleeves
FTSW
* Debonding sleeve is supplied according to tie measurement.
Frame cramps are designed to restrain the masonry with the new or existing vertical structure. LSSB-ST
LST
end
LSS
Split End
CGWT
wall tie
LSSB
LBT
u-cut end
LPS-ST
slot tie
LPT
LPS
LSS-ST
Split-end LPS-S
LSSF
The 06mm hole (as in LPS) or 6mmx18mm slot (as in LPT) in the standard 30mm upstand (other upstand height available upon request) is provided for attaching the frame cramp to the vertical structure and the other end is embedded to the masonry.
* Custom designs are available upon request.
* Material - Galvanized, Stainless steel, mild 搜集信息
steel.* Finish - Hotdip galvanized, Powder coated
* Custom designs are available upon request.
* Material - Galvanized, Stainless steel, mild steel.* Finish - Hotdip galvanized, Powder coated
The products are designed to cure two masonry of a cavity wall, allowing them to act as one struc以生命为话题的作文
ture.
C avity Wall Ties
The tie made of strip (as in FCWT) or wire (as in WTB) is embedded in the inner and outer masonry. Ties having a 06.0mm hole or 6mmx18mm slot in the standard 30mm upstand (as in CWT) will be fixed to the existing vertical structure and the other end is embedded to the outer masonry. The drip feature of the tie can be fabricated according to customer requirements, and should be pointed downside during installation to prevent the moisture from crossing between the masonry.
LPS-SC
cavity tie
CWT-ST
CWT
Cavity wall tie
bolt/screw-on
LS-T
L-Slot
PCWT
LPS-STC
cavity tie
* Custom designs are available upon request.
Strip
FS2F FCWT
Flat two side
wall tie
SCT
Wire
Embedment Length of Tie
The tie should be of perfect length so that it should be
properley embeded in mansonry. TMI suggest a minimum
embedment of 50 perecentage in each block.
WTZ
Z-Shape Wire
tie
DTW-DD
wire tie
double drip
DTW-SD
wire tie single
drip
ZWT
Z-Wire Tie
WTB
* Custom designs are available upon request.
* Material - Galvanized, Stainless steel, mild steel.
* Finish - Hotdip galvanized, Powder coated
