Versatile Link
The Versatile Fiber Optic
Connection
Technical Data
HFBR-0501 Series
Features
• Low Cost Fiber Optic Components
• Enhanced Digital Links
dc-5 MBd
• Extended Distance Links up to 120 m at 40 kBd
• Low Current Link: 6 mA Peak Supply Current
• Horizontal and Vertical Mounting
• Interlocking Feature
• High Noi Immunity
宝宝多大说话正常• Easy Connectoring Simplex, Duplex, and Latching Connectors
• Flame Retardant
• Transmitters Incorporate a 660 nm Red LED for Easy Visibility
• Compatible with Standard TTL Circuitry Applications
• Reduction of Lightning/Volt-age Transient Susceptibility • Motor Controller Triggering • Data Communications and Local Area Networks
• Electromagnetic Compatibility (EMC) for Regulated Systems: FCC, VDE, CSA, etc.
• Tempest-Secure Data Processing Equipment • Isolation in Test and
Measurement Instruments
• Error Free Signalling for
Industrial and Manufactur-
ing Equipment
• Automotive Communications
and Control Networks
• Noi Immune Communica-
tion in Audio and Video
Equipment制冰机原理
Description
The Versatile Link ries is a
complete family of fiber optic link
components for applications
requiring a low cost solution. The
HFBR-0501 ries includes trans-
mitters, receivers, connectors and
cable specified for easy design.
This ries of components is ideal
for solving problems with voltage
isolation/insulation, EMI/RFI
immunity or data curity. The
optical link design is simplified
by the logic compatible receivers
and complete specifications for
each component. The key optical
and electrical parameters of links
configured with the HFBR-0501
family are fully guaranteed from
0° to 70°C.
A wide variety of package config-
urations and connectors provide
the designer with numerous
mechanical solutions to meet
application requirements. The
transmitter and receiver compo-
nents have been designed for u
in high volume/low cost asmbly
process such as auto inrtion
and wave soldering.
Transmitters incorporate a 660
nm LED. Receivers include a
monolithic dc coupled, digital IC
receiver with open collector
Schottky output transistor. An
internal pullup resistor is avail-
able for u in the HFBR-25X1/2/
4 receivers. A shield has been
integrated into the receiver IC to
provide additional, localized noi
immunity.
Internal optics have been optim-
ized for u with 1 mm diameter
plastic optical fiber. Versatile
Link specifications incorporate
all connector interface loss.
Therefore, optical calculations for
common link applications are
simplified.
HFBR-0501 Series Part Number Guide
HFBR X5XX
1 = Transmitter
2 = Receiver
5 = 600 nm Transmitter and
Receiver Products
1 = 5 MBd High Performance Link
2 = 1 MBd High Performance Link
3 = 40 kBd Low Current/Extended Distance Link 2 = Horizontal Package
一颗星两颗星4 = 1 MBd Standard Link 3 = Vertical Package
6 = 155 MBd Receiver
7 = 155 MBd Transmitter
8 = 10 MBd High Performance Link
Link Selection Guide
(Links specified from 0 to 70°C, for plastic optical fiber unless specified.)Signal Rate Distance (m) 25°C
Distance (m)
Transmitter Receiver 40 kBd 120110HFBR-1523HFBR-25231 MBd 2010HFBR-1524HFBR-25241 MBd 5545HFBR-1522HFBR-25225 Mbd
30
20
HFBR-1521
HFBR-2521番茄超人
Evaluation Kit
HFBR-0501 1 MBd Versatile Link:
This kit contains: HFBR-1524 Tx, HFBR-2524 Rx, polishing kit, 3 styles of plastic connectors, Bulkhead feedthrough, 5 meters of 1 mm diameter plastic cable, lapping film and grit paper, and HFBR-0501 data sheet.
Application Literature
Application Note 1035 (Versatile Link)
VALOX ® is a registered trademark of the General Electric Corporation.
Package and Handling Information
The compact Versatile Link pack-age is made of a flame retardant VALOX ® UL 94 V-0 material
(UL file # E121562) and us the same pad layout as a standard,eight pin dual-in-line package.Vertical and horizontal mountable parts are available. The low profile Versatile Link packages are stackable and are enclod to
provide a dust resistant al.Snap action simplex, simplex latching, duplex, and duplex latching connectors are offered with simplex or duplex cables.Package Orientation
Performance and pinouts for the vertical and horizontal packages are identical. To provide addi-tional attachment support for the vertical Versatile Link housing,
the designer has the option of using a lf-tapping screw
through a printed circuit board into a mounting hole at the
神奇遥控器bottom of the package. For most applications this is not necessary .Package Housing Color
Versatile Link components and simplex connectors are color coded to eliminate confusion
when making connections.
Receivers are blue and transmit-ters are gray, except for the
HFBR-15X3 transmitter, which is black.
Handling
Versatile Link components are auto-inrtable. When wave soldering is performed with Versatile Link components, the optical port plug should be left in to prevent contamination of the port. Do not u reflow solder process (i.e., infrared reflow or vapor-pha reflow).
Nonhalogenated water soluble fluxes (i.e., 0% chloride), not rosin bad fluxes, are recom-mended for u with Versatile Link components.
Versatile Link components are moisture nsitive devices and are shipped in a moisture aled bag. If the components are expod to air for an extended period of time, they may require a baking step before the solder-ing process. Refer to the special labeling on the shipping tube for details.
Recommended Chemicals for Cleaning/Degreasing
Alcohols: methyl, isopropyl,isobutyl. Aliphatics: hexane,heptane, Other: soap solution,naphtha.
Do not u partially halogenated hydrocarbons such as 1,1.1
trichloroethane, ketones such as MEK, acetone, chloroform, ethyl acetate, methylene dichloride,phenol, methylene chloride, or N-methylpyrolldone. Also, Agilent does not recommend the u of cleaners that u halogenated hydrocarbons becau of their potential environmental harm.
Mechanical Dimensions魏书生班级管理
生物悬浮填料Horizontal Modules
Vertical Modules梦见自己生女孩
18.80.740
7.6(0.30)
Versatile Link Printed Board Layout Dimensions
Horizontal Module
Vertical Module
Interlocked (Stacked)Asmblies (refer to Figure 1)
Horizontal packages may be
stacked by placing units with pins facing upward. Initially engage the interlocking mechanism by sliding the L bracket body from above into the L slot body of the lower package. U a straight
edge, such as a ruler, to bring all stacked units into uniform alignment. This technique prevents potential harm that could occur to fingers and hands of asmblers from the package pins. Stacked horizontal packages can be dingaged if necessary.Repeated stacking and unstack-ing caus no damage to individual units.
To stack vertical packages, hold one unit in each hand, with the pins facing away and the optical ports on the bottom. Slide the L bracket unit into the L slot unit.The straight edge ud for
horizontal package alignment is not needed.
Stacking Horizontal Modules
Figure 1. Interlocked (Stacked) Horizontal or Vertical Packages.
DIMENSIONS IN MILLIMETERS (INCHES).
5 MBd Link (HFBR-15X1/25X1)
System Performance 0 to 70°C unless otherwi specified.
Notes:
1. The propagation delay for one metre of cable is typically 5 ns.
2. Typical propagation delay is measured at P R = -15 dBm.
3. Estimated typical link life expectancy at 40°C exceeds 10 years at 60 mA.
Figure 2. Typical 5 MBd Interface Circuit.
Figure 4. Guaranteed System Performance with Improved Cable (HFBR-15X1/25X1).
Figure 3. Guaranteed System Performance with Standard Cable (HFBR-15X1/25X1).I – F O R W A R D C U R R E N T (m A )F
I – F O R W A R D C U R R E N T (m A )F
