• Industrial Safety Products •
4月14日21
Introduction
IV - American regulations and standards篮球运动的特点
Today, both CSA and UL's testing and certification roles have expanded to cover both Canada and the USA. CSA is now recognized by the U.S. Occupational Safety and Health Administration (OSHA) as a Nationally Recognized Testing Laboratory (NRTL). This means that they can now test and certify products to U.S. as well as Canadian standards. There are three different CSA marks:
For Canada only
For US only
For both US
and Canada
Honeywell products that carry the CSA NRTL/C or CULus mark are approved and recognized for u throughout the US as well as Canada.
For Canada only
For both
US and Canada
UL has similar marks as well.
Control Reliability
Control reliability information can be found in documents published by the American National Stan-dards Institute (ANSI) and Occupational Safety and Health Administration (OSHA). ANSI is an insti-tute that provides industry guidance through their published machinery standards. OSHA is a US government agency responsible for labor regulations. Additional information about ANSI and OSHA is described later in this ction. The organizations have provided the following defini-tions for control reliability.
“Control Reliability ” means that, “the device, system or interface shall be designed, constructed and installed such that a single component failure within the device, interface or system shall not prevent normal stopping action from taking place but shall prevent a successive machine cycle.”(ANSI B11.19-1990, 5.5)
In addition, OSHA 29 CFR 1910.217 states that, “the control system shall be constructed so that a failure within the system does not prevent the normal stopping action from being applied to the press when required, but does prevent initiation of a successive stroke until the failure is corrected. The failure shall be detectable by a simple test, or indicated by the control system.”The health and safety of American workers is a rious topic. Agencies like OSHA and ANSI have published regulations and standards related to the safe operation of industrial equipment. OSHA document 29 Code of Fe
deral Regulations (CFR), parts 1900 to 1910, ts the rules that need to be followed for a safe industrial environment. This publication also refers to the ANSI B11 standards for specific
industrial machinery. The standards are more likely to include state-of-the-art information than an applicable OSHA standard.The word “shall ” found in US standards and regulations is equivalent to “must ” and indicates a mandatory condition.
The requirements of 29 CFR 1910.212 are applicable to all industrial machinery .Paragraph (a) (1), requires that employees be
U L
C
US STED
LI ®
Introduction
22
• Industrial Safety Products •
protected from the hazards created by point of operation , in-going nip points, and rotating parts.
ANSI B11.19, paragraph 2.38 defines the point of operation as, “The location in the machine tool where material is positioned and a process performed.”
Protection from machinery applies to either new or existing machinery as stated in ANSI B11.19, in Part 1.3 Applications (Adopted in Feb. 28 1990).
“1.3.1 New Safeguarding. The requirements of this standard pertaining to the construction of safeguarding shall be applied to all new safeguarding , as referenced by the other B11machine tool safety standards, to be installed on machine tools in the United States within 12months after the approval date of this standard.”
英语句子分析“1.3.2 Existing Safeguarding. Within 48months of the approval date of this standard ,all safeguarding, as referenced by the other B11 machine tool safety standards, installed in the United States on machine tools shall be modified by the employer to the extent required to bring them into c脉平片
onformity with the requirements of this standard .”
To protect operators working with industrial machinery, the following safety devices shall be ud:
“2.15 Device, Safeguarding. A control attach-ment that:
(1)Restrains the operator from inadvertently reaching into the hazardous area, or
(2)Prevents normal or hazardous operation if any part of an individual ’s body is inadvertently within the hazardous area, or (3)Automatically withdraws the operator ’s hands, if the operator ’s hands are inadvertently within the hazardous area during the hazardous portion of the machine cycle, or
人工智能的利与弊(4)Maintains the operator or the operator ’s hands during the hazardous portion of the machine cycle at a safe distance from the hazardous area.” (ANSI B11.19)
Honeywell provides electromechanical switches and electronic nsors to protect operators and other employees from industrial machine hazards. When ud in accordance with our detailed instructions for u, the products will fulfill one or more of the following requirements:
“2.30 Interlocked Barrier Guard. A fixed or movable barrier attached and interlocked in such a mann
er that the machine tool will not cycle or will not continue to cycle unless the guard itlf or its hinged or movable ctions enclo the hazardous area.” (ANSI B11.19)“2.39 Prence-nsing Device. A device designed, constructed, and arranged to create a nsing field, area, or plane that will detect the prence of the operator ’s or other ’s hand or other body part and nd a signal to stop or prevent hazardous motion of the machine tool.” (ANSI B11.19)
Honeywell safety devices are reliable and designed to meet the highest possible level of safety. When lected properly and ud in accordance with our detailed instructions for u, the products comply with all the necessary safety standards as mentioned in the following regulation extracts.
OSHA 29 CFR 1910.212 Paragraph (a) (3)describes the requirements for safeguarding the point of operation as follows: “The guarding device shall be in conformity with any appropriate standards therefore, or in the abnce of applicable specific standards, shall be so designed and constructed as to prevent the operator from having any part of his body in the danger zone during the operating cycle.”Honeywell safety products comply with control reliability requirements as described below:“Control Reliability ” means that, “the device,system or interface shall be designed,constructed and installed such that a single component failure within the device,interface or system shall not prev
ent normal stopping action from taking place but shall prevent a successive machine cycle .”
• Industrial Safety Products •
23
Introduction
List of Specific ANSI Safety Standards and OSHA Federal Regulations (ANSI B11.19-1990, 5.5)
American National Standards On Safety
Requirements for Construction, Care, and U of Machine Tools, Conveyors Standards
Title
ANSI B11.1-1982Mechanical Power Press ANSI B11.2-1982Hydraulic Power Press ANSI B11.3-1982Power Press Brakes ANSI B11.4-1983Shears
ANSI B11.5-1988Iron Workers ANSI B11.6-1984Lathes
浇汁鱼
ANSI B11.7-1985Cold Headers and Cold Formers
ANSI B11.8-1983Drilling, Milling, and Boring Machines ANSI B11.9-1975Grinding Machines ANSI B11.10-1983Metal Sawing Machines ANSI B11.11-1985Gear Cutting Machines
ANSI B11.12-1983Roll Forming and Roll Bending Machines
ANSI B11.13-1983Single and Multiple Spindle Automatic - Screw/Bar and Chucking Machines
ANSI B11.14-1983Coil Slitting Machines/Equipment
ANSI B11.15-1984Pipe, Tube, and Shape Bending Machines ANSI B11.17-1982Horizontal Hydraulic Extrusion Press白茶功效
ANSI B11.18-1985Machinery and Machine Systems for the processing of Coiled Strip,Sheet, and Plate
ANSI B11.19-1990Machine Tools, Safeguarding ANSI B11.20-1991Manufacturing Systems/Cells
ANSI/RIA 15.06Safety Requirements for Industrial Robots and Robot Systems ANSI B20.1Conveyors
Occupational Safety And Health Federal Regulations Regulations
Title微信生日祝福
1910.212General Requirements for all Machines 1910.217
Mechanical Power Press
