Cisco思科系列IP话机使用指南
Cisco 7841 IP Phone Menu Introduction
1 | Handt light strip | Indicates an incoming call (flashing red) or new voice message (steady red). |
2五行属金的字有哪些 | Programmable feature Buttons排卵期出血吃什么药 | Depending on how your system administrator ts up the phone, programmable feature buttons (on each side of the phone screen) provide access to: • Phone lines and intercom lines • Speed-dial numbers (speed-dial buttons, including the Line Status speed-dial features) • Web-bad rvices (for example, a Personal Address Book button) • Call features (for example, a Privacy button) Buttons illuminate to indicate status: • Green, steady: Active call or two-way intercom call • Green, flashing: Held call • Amber, steady: Privacy in u, one-way intercom call, DND active, or logged into Hunt Group • Amber, flashing: Incoming call or reverting call • Red, steady: Remote line in u (shared line or Line Status) • Red, flashing: Remote line on hold |
3 | Phone screen | Shows information about your phone such as directory number, active call and line status, softkey options, speed dials, placed calls, and phone menu listings. |
4 | Softkey buttons | Depending on how your system administrator ts up the phone, enable softkey options displayed on your phone screen. |
5 | 林冲人物关系Navigation and Select Button | The Navigation and Select button allows you to scroll through menus, highlight items and lect the highlighted item. |
6 | Hold/Resume button | Places an active call on hold and resumes the held call. |
7 | Conference button | Creates a conference call. (This key can work only when at least one call is connected and start a cond call) |
8 | Transfer button 赏心悦目的近义词 | Transfers a call. |
9 | Speakerphone button | Toggles the speakerphone on or off. When the speakerphone is on, the button is lit. |
10 | Headt button | Toggles the headt on or off. When the headt is on, the button is lit. |
11 | Mute button | Toggles the microphone on or off. When the microphone is muted, the button is lit. |
12 | Keypad | Allows you to dial phone numbers, enter letters, and lect menu items (by entering the item number). |
13 | Volume button | Controls the handt, headt, and speakerphone volume (off hook) and the ringer volume (on hook). |
14 | Contacts button | Opens or clos the Directories menu. U the Contacts button to access personal and corporate directories. |
15 | Applications button | Opens or clos the Applications menu. U the Applications button to access call history, ur preferences, phone ttings, and phone model information. |
16 | Messages button | Autodials your voice messaging system (varies by system). |
土豆的英语怎么说17 | Handt勾股定理的由来 | Phone handt. |
| | |
7841 Basic Call Function
1. Answer multiple incoming calls
Step 1 Press the flashing amber line button.
Your phone puts the original call on hold automatically and connects the ringing call.
Step 2 If you want to lect between the two calls, put them both on hold and press the line button
Step 3 You can also switch calls by pressing line button.
2. Transfer call
Step 1 Verify that you are on an active call (not on hold).
Step 2 Press Transfer (Or you can u softkey)
Step 3 Enter the transfer recipient’s phone number or press a speed-dial button.
Step 4 Wait for the recipient to answer or skip to Step 5 while the call is ringing.
Step 5 Press Transfer again. (Or you can u softkey)
3. Swap between calls
Transfer allows you to redirect a connected call from your phone to another number:
You can redirect a single call to another number that you specify.
You can also connect two calls on one line or two different lines to each other (without remaining on the line yourlf).
Before completing a transfer procedure, you can press Cancel to cancel the transfer or you can press Swap to toggle between calls, which allows you to speak privately with each party.
Step 1 While on a call, connect to the transfer recipient.
Step 2 To return to the original call, press Swap.
You can consult privately with each person before you complete the transfer.
4. Add third party to Conference
Step 1 Verify that you are on an active call (not on hold).
Step 2 Press Conference. (Or you can u softkey)
Step 3 Enter the phone number for the party that you want to add or press a speed dial button.
Step 4 Wait for the party to answer, or skip to step 5 while the call is ringing.
Step 5 Press Conference again. (Or you can u softkey)
The conference begins.
Step 6 (Optional) Repeat the steps to add more parties, if desired.
5. Combine calls to create conference
Before You Begin
You require multiple phone lines to perform this task
Step 1 Verify that you have two connected calls and that one of the calls is active (not on hold).
Step 2 Press Conference. (Or you can u softkey)
家常烧烤Step 3 Press the line button for the other (held) call.
The conference begins. The conference is established on the line with the active call.
做红烧肉的做法
6. Swap Between Calls Before Completing Conference
You can consult privately with the conference and another person, before adding the person into the conference.
Step 1 Call a new conference participant, but do not add the participant to the conference.
Step 2 Press Swap to toggle between the participant and the conference.
7. View Conference Participants
You can view the details of the last 16 participants who joined the conference.
Procedure
While in a conference, press Show Details to view a list of participants.
When you place a call to another party and the person that you called creates a conference with a third phone, the Show Details softkey displays only for the person who created the conference.
8. Remove Conference Participant
Step 1 While you are in a conference, press Details to view a list of participants.
Step 2 Highlight the participant that you want to remove, then press Remove.
9. Log in using Extension mobility
Step 1 Press Applications.
Step 2 Select Extension Mobility (name can vary, including EM Service).
Step 3 Enter your ur ID and PIN (provided by your system administrator).
Step 4 Select a device profile if prompted.
