一、编译循环概述
高三提前招生大专1、840D系统NC的开放性
The NCK OA package (Open Architecture package NCK) is a component of the SINUMERIK Open Architecture that allows manufacturer-specific NCK functions (compile cycles) to be implemented in the system. They are implemented in the NCU’s system software in C or C++.
2、NCK OA package使用条件
1、The NCK OA package requires an export approval.家居沙发
精简人员2、An OEM contract is required to u the NCK OA package.
3、The development system must be a SUN workstation with Solaris operating system.
3、编译循环作用
The openness of the SINUMERIK 840D powerline NCK allows urs to develop solutions for (almost) every technological problem and application! This is possible with the integration of technological add-o
n functions in the NCU system software in the form of compile cycles. The compile cycles can either be programmed bad on the NCK OA package and the appropriate development environment, or through development and testing in industrial conditions contracted to Siemens.
4、编译循环功能举例
• 1D/3D clearance control in position control cycle
• Axial coupling in the machine coordinate system
•Handling transformation package
下士的工资是多少• Pantograph kinematics transformation, two axes
• PARACOP 3-axis transformation for parallel kinematics (first channel)
• Tripod-hybrid-kinematics Exechon transformation
• Lar switching signal, high-speed
•Continue machining at the contour
拌牛板筋• PROFIBUS tool and process monitoring
• Space error compensation for kinematic transformations
• Axis collision protection
•Crank interpolation
二、编译循环的一般设置步骤
1、安装硬件（某些编译循环功能有，例如ARTIS刀具和过程监控）
2、装载编译循环ELF文件
3、设定选项参数
宜昌市深圳路小学
4、打开激活编译循环功能参数
5、设定内存分配
6、PLC硬件配置及信号处理（某些编译循环功能有，例如ARTIS刀具和过程监控）
7、安装人机界面（某些编译循环功能有，例如ARTIS刀具和过程监控）
三、编译循环诊断方法
四、装载编译循环ELF文件的几种方法
1、使用SINUCOM FFS
A、新建CCOEM目录
B、将ELE文件粘贴到CCOEM目录
C、写入NC卡
小学生数学题
2、使用HMI ADVANCE界面（V6.3以上）
A、将无CCOEM目录的NC卡打开写保护
什么样的图画B、启动后NC卡自动生成CCOEM目录
B、复制ELF文件
C、将ELE文件粘贴到CCOEM目录
