粮票值钱吗学习伴成长第52卷第5期2020年10月
Vol.52No.5实况8
Oct.2020南京航空航天大学学报咨询服务合同范本
Journal of Nanjing University of Aeronautics&Astronautics
亚超剪切混合层燃油雾化特性试验研究
宫冠吉1，李建中1，金武1，袁丽2
（1.南京航空航天大学航空发动机热环境与热结构工业和信息化部重点实验室，南京，210016；2.陆军工程大学
国防工程学院，南京，210007）
ipad设置
摘要：为了摸清亚超大梯度剪切混合层内直射式喷嘴的燃油雾化特性，设计了用于向亚超剪切混合流中进行燃油喷射的直射式喷嘴，建立了亚超剪切混合层中燃油雾化试验系统。利用粒子图像测速系统（PIV），对亚超大梯度混合层中油雾场进行测量。通过改变喷嘴流量、喷射角度和喷嘴数量研究不同参剖腹产后注意事项
数对雾化特性的影响，并应用图像处理技术对亚超大梯度剪切混合层内的油雾场进行分析，总结归纳其雾化规律。试验结果显示：随着流量增大，穿透深度会随之增大，破碎后的颗粒分布峰值所对应的液滴直径会逐渐变小，雾化效果提升；相同流量条件下，喷嘴的角度改变对雾化效果有影响，顺喷和逆喷的雾化效果均好于垂直喷射；逆喷的喷射高度最高，随着流量的增长，燃料将会碰壁；顺喷条件下，随着角度的增加，穿透长度会有所增加；综合燃油轨迹边界，逆喷的效果相对较好。相同流量条件下，喷孔个数的改变对雾化效果和穿透深度的影响不大。
关键词：推进系统；亚超剪切混合层；雾化特性
中图分类号：V231.1文献标志码：A文章编号：1005‑2615（2020）05‑0817‑08
Experimental Investigation on Spray Characteristics in Subsonic‑Supersonic
Shear Mixing Layer
GONG Guanji1，LI Jianzhong1，JIN Wu1，YUAN Li2
（1.Key Laboratory of Aero‑engine Thermal Environment and Structure，Ministry of Industry and Information Technology，Nanjing University of Aeronautics&Astronautics，Nanjing，210016，China；2.School of National Defen Engineering，the外科风云剧情介绍
Army Engineering University of PLA，Nanjing，210007，China）
Abstract:To find out the atomization characteristics of the direct jet nozzle in the subsonic-supersonic large velocity gradient shear mixing layer，a kind of direct injector ud to inject fuel into shear mixing layer is designed and a fuel atomization test system is t up.The particle image velocimetry system（PIV）is ud to measure the spray field in the subsonic-supersonic large velocity gradient shear mixing layer.The influence of different parameters on atomization characteristics is studied by changing the nozzle flow rate，injection angle and the number of injectors in the experiment.The spray field in the subsonic-supersonic shear mixing layer is analyzed by digital image processing technology to sum up the law of atomization.Experimental results show that the change of flow rate will increa the penetration depth and the droplet diameter corresponding to the peak distribution of the broken particles will gradually become smaller，thus improving the atomization effect. At the same flow rate，the atomization effect is affected by the angle change of the nozzle.The atomization effect of both downstream and upstream is better than that of the vertical injection.The injection height of the rever injection is the highest，and the fuel will bump onto the wall with the increa of the flow rate.For downstream injection，the penetration length increas with the increa of angle.The effect of inver injection can be obtained relatively well by obrving the boundary of integrated fuel trajectory.At the same DOI：10.16356/j.1005‑2615.2020.05.019
收稿日期：2019‑01‑20；修订日期：2019‑11‑13
红酒会不会过期
通信作者：李建中，男，博士，教授，博士生导师，E-mail：*****************。
引用格式：宫冠吉，李建中，金武，等.亚超剪切混合层燃油雾化特性试验研究［J］.南京航空航天大学学报，2020，52（5）：817‑824.GONG Guanji，LI Jianzhong，JIN Wu，et al.Experimental investigation on spray characteristics in subsonic‑su‑personic shear mixing layer［J］.Journal of Nanjing University of Aeronautics&Astronautics，2020，52（5）：817‑824.
