PL1167
Low Power High Performance Single Chip 2.4GHz Transceiver Product Description:
PL1167 is a piece of true low power high performance single chip 2.4GHz transceiver, which is designed for operation in the world wide ISM frequency band at 2.400~2.4835GHz. This single chip wireless transceiver integrated including: RF synthesizer, Power Amplifier, Crystal Oscillator, Modem and etc. All of the Output Power, Channel Selection, and Protocol can be configured through SPI Interface. With built in FHSS and accurate digital RSSI, this transceiver achieves a good capability of anti-interference, so that, it can work under every complicated environment with high performance. It also support address and data check out; FEC, CRC function; and Auto-Ack & Auto-Rend function. The output power of the chip can be t up to 2dBm and the receive nsitivity can achieve -88dBm. With on chip regulator and advanced power management function, the current consumption in sleep mode can be reduced to nearly 1uA.
小街锅贴Key Features:
芹菜可以炒鸡蛋吗y y y y y y y y y y y True Low Power High Performance Single Chip 2.4GHz Transceiver Built in Hardware Link Layer Built in Accurate Digital RSSI Support Auto-Ack and Auto-Rend Functions Bu
ilt in Address and Data Checkout, FEC, CRC Functions Data Rate over the air：1Mbps Support SPI Bus Interface Support HFSS Support Micro-Strip Inductor and Two Layer PCB Boards 1.9 to 3.6V supply range Packages：QFN16/SOP16
Applications:
y y Wireless Mice, keyboards and Game Controllers Wireless Data Communication Wireless Door Accessing Wireless Networks Safety and Guard System RF Remote Control Remote Sensing Sports watches and nsors Home and commercial automation Industrial Sensors Industrial and Commercial Short Range Communication VoIP headts Toys
Pin Configuration:
y y y y y y y y y y y
V0.4 © 2012图片心情
1
Datasheet (Preliminary Version)
PL1167
1 Overview
PL1167 is a piece of true low power high performance single chip 2.4GHz transceiver, which is designed for operation in the world wide ISM frequency band at 2.400~2.4835GHz. This single chip wireless transceiver integrated including: RF synthesizer, Power Amplifier, Crystal Oscillator, Modem and etc. All of the Output Power, Channel Selection, and Protocol can be configured through SPI Interface. With built in FHSS and accurate digital RSSI, this transceiver achieves a good capability of anti-interference, so that, it can work under every complicated environment with high performance. It also support address and data check out; FEC, CRC function; and Auto-Ack & Auto-Rend function. The output power of the chip can be t up to 2dBm and the receive nsitivity can achieve -88dBm. With on chip regulator and advanced power management function, the current consumption in sleep mode can be reduced to nearly 1uA.
2 Features
z z z z z True Low Power High Performance Single Chip 2.4GHz Transceiver Built in Hardware Link Layer Built in Accurate Digital RSSI Support Auto-Ack and Auto-Rend Functions Built in Address and Data Checkout, FEC, CRC Functions z z z z z z Data Rate over the air：1Mbps Support SPI Bus Interface Support HFSS Support Micro-Strip Inductor and Two Layer PCB Boards 1.9 to 3.6V supply range Packages：QFN16/SOP16
3 Quick Reference Data
Parameter
Min Supply Voltage Max Output Power Data Rate Current Consumption (0dBm) @TX Mode Current Consumption @RX Mode Operating Temperature Range RX Sensitivity Current Consumption @Sleep Mode V0.4 © 2012
Value
1.9 2 1 16 17 -40 to +85 -88 1
Units
V dBm Mbps mA mA ℃ dBm uA
2
Datasheet (Preliminary Version)
PL1167
4 Pin Diagrams
The pin map is shown as below for QFN16.
The pin map is shown as below for SOP16.
V0.4 © 2012
求职英语
3
Datasheet (Preliminary Version)
PL1167
5 Pin Description
Pin(QFN16)暖字成语
1 2 3,8,17 4,5 6 7 9 10 11 12 13 14 15 16
Name
ANTB ANT VSS NC PKT RSTB SCSB SCK SDI SDO VCC VDDO XOUT XIN
Pin Function
RF RF Power N/C Digital Output Digital Input Digital Input Digital Input Digital Input Digital Output Power Power Analog Output Analog Input
Description静悄悄的革命
Antenna Interface Antenna Interface Ground (0V) Not Connected Transmit/Receive Packet Status Indicator Bit Ret Pin, active low Enable Input for SPI Interface, active Low Wakeup from SLEEP state Clock Input for SPI Interface Data Input for SPI Interface Data Output for SPI Interface (tri-state
when not active) Power Supply (3.3V) 1.8V power output，connect to capacitor Crystal Oscillator Output Crystal Oscillator Input
V0.4 © 2012
4
Datasheet (Preliminary Version)
PL1167
6 Block Diagram
7 Absolute Maximum Ratings
Absolute maximum ratings are the parameter values or ranges which can cau permanent damage and affect device reliability if exceeded.
Parameter
鲁智深的外号Supply Voltage of VCC Supply Voltage of VDDO Input Voltage Output Voltage Operating Temperature Storage Temperature
Symbol
VCC VDDO VIN VOUT TOP TST
Value
-0.3 to +3.6 -0.3 to +2.5 -0.3 to (VCC+0.3) -0.3 to (VCC+0.3) -40 to +85 -40 to +125
Units
V V V ℃ ℃
Note: The are stress ratings only. Stress beyond the limits may cau permanent damage to the device. Functional operation of the device at the or any conditions beyond tho indicated under Recommended Operating Conditions is not implied. Exposure to absolute maximum rated conditions for extended periods of time may affect device reliability.
V0.4 © 2012
带的成语
5
