常用DIN标准
• 六角头自钻自攻螺钉DIN EN ISO 15480 • 六角头木螺钉Din 571 • 内六角紧定螺钉—凹端Din 916 • 内六角紧定螺钉—截锥端Din 914 • 弹簧垫圈DIN 128 • 十字槽圆头螺钉DIN 7996
• 牙条DIN 975 • 开槽盘头螺钉DIN 85-72 • 十字槽球面圆柱头螺钉DIN 7985-86
• 内六角紧定螺钉—导向圆柱端Din 915 • 内六角紧定螺钉—平端Din 913 • 六角法兰面螺母DIN EN 1661 • 1型六角螺母—产品等级A和B级DIN EN ISO 4032 • 方螺母—产品等级C级DIN 557 • 六角凸缘头自钻自攻螺钉DIN EN ISO 15480 • 十字槽盘头自钻自攻螺钉DIN EN ISO 15481
• 平圆头方颈螺栓DIN 603 • 圆柱头内六角螺钉DIN EN ISO 4762 • 内六角平圆头螺钉DIN EN ISO 7380 • 薄圆柱头内六角螺钉DIN 6912 • 六角头螺栓—全螺纹—产品等级A和B级DIN EN ISO 4017 • 螺杆DIN 976-1 • 内六角沉头螺钉DIN EN ISO 10642
所有DIN标准
螺栓
• 焊接螺栓Weld screws with metric headDIN 34817
• 方头凸缘螺栓Squate head bolts with collarDIN 478
• 平圆头方颈螺栓Mushroom head square neck boltsDIN 603
• 沉头带榫螺栓Flat countersunk nib boltsDIN 604
• 沉头高方颈螺栓Flat countersunk square neck bolts with long squareDIN 605
石膏线条装修效果图
• 半圆头带榫螺栓Cup head nib boltsDIN 607
• 沉头短方颈螺栓Flat countersunk square neck bolts with short squareDIN 608
• 六角花形大法兰面钢制螺栓Steel hexalobular head bolts with large flangeDIN 34801
• 六角头铰制孔用螺栓Hexagon fit boltsDIN 609
• M42-M160*6 六角头螺栓—产品等级B级M42 to M160*6 hexagon head bolts - Product grade B DIN 931-2
• 六角法兰面螺栓—小系列Hexagon bolts with flange - Small riesDIN EN 1662
• 六角法兰面螺栓—加大系列Hexagon bolts with flange - Heavy riesDIN EN 1665 | 代替DIN 6921|DIN 6922
• 六角头螺栓—－产品等级B级－细杆（杆径近似等于中径）Hexagon head bolts with reduced shank(shank diameter=pitch diameter)-Product grade BDIN EN 24015
• 六角头螺栓—产品等级A和B级Hexagon head bolts - Product grades A and BDIN EN ISO 4014 | 代替DIN 931-1
• 六角头螺栓—产品等级C级Hexagon head bolts - Product grade CDIN EN ISO 4016 | 代替DIN 601
• 六角头螺栓—全螺纹—产品等级A和B级Hexagon head screws - Product grade A and B
DIN EN ISO 4017 | 代替DIN 933
• 六角头螺栓—全螺纹—产品等级C级Hexagon head screws - Product grade CDIN EN ISO 4018 | 代替DIN 558
• 六角头螺栓—细牙—全螺纹—产品等级A和B级Hexagon head screws with metric fine pitch thread - Product grade A and BDIN EN ISO 8676 | 代替DIN 961
• 六角头螺栓—细牙—产品等级A和B级Hexagon head bolts with fine pitch thread - Product grades A and BDIN EN ISO 8765 | 代替DIN 960
• 钢结构用—大六角头高强度螺栓High-strength hexagon head bolts with large widths across flats for structural steel boltingDIN 6914
数学童话故事• 短螺纹端的六角头铰制孔用螺栓DIN 610-84
• 粗杆六角头螺栓重量DIN 931-87(3)
• Clevis pins DIN 1445
• Plain washers for metric bolts,screws and nuts .for general purp os General planDIN EN ISO 887 • Hexa gon head bolts with metric fine pitch thread(Product grade A and B)DIN EN ISO 8765
• Thread run-outs and thread undercuts for ISO metric threads as in IND 13-1DIN 76-1
• Threa d run-outs and thread undercutsDIN 76
• Bolt end protrusions DIN 78
• D iameters of counterbores(holes)DIN 974
• Split pin holes and wire holes in bolts,screws and studsDIN 34803
• Bolts,screws,studs and nuts DIN EN 20225
• Clear ance holes for bolts and screwsDIN EN 20273
• T形头螺栓ISO general purpo metric screw threads. General plaDIN ISO 261
• 一般用途螺栓和螺钉.米制系列.端头半径General purpo bolts and screws-metric ries
DIN ISO 885
• T型螺栓188
• T型螺栓186
螺钉
• 方头短圆柱端紧定螺钉Square head bolts with short dog pointDIN 479
• 方头短圆柱球面端紧定螺钉Square head bolts with collar and oval half dog pointDIN 480
• 开槽圆柱头螺钉—产品等级A级Slotted chee head screws-Product grade ADIN EN ISO 1207 | 代替DIN 84
清汤牛肉的做法与配料
• 开槽沉头螺钉（通用头型）－产品等级A级Slotted pan head screws-Product grade ADIN EN ISO 1580 | 代替DIN 85
• 开槽沉头螺钉（通用头型）－产品等级A级Slotted countersunk flat head screws(common head style) DIN EN ISO 2009 | 代替DIN 963
• 开槽半沉头螺钉（通用头型）－产品等级A级Countersunk slotted raid head screws(common head style)-Produce grade ADIN EN ISO 2010 | 代替DIN 964
• 十字槽盘头凸缘螺钉—产品等级A级Product grade A cross recesd pan head screws with collar DIN 967
• 十字槽沉头（通用头型）螺钉－产品等级A级－第2部分：性能等级钢8.8级、不锈钢和有色金属Cross recesd countersunk flat head screws (common head style),product grade A-Part2:Steel of property class 8.8,stainless steel and nonferous metalsDIN EN ISO 7046-2 | 代替DIN 965
• 开槽盘头螺钉DIN 85-72 • 开槽十字孔螺钉DIN 404-86 • 开槽小盘头螺钉DIN 920-86
• 十字槽沉头自钻自攻螺钉Cross recesd countersunk head drilling screws with tapping screw threadDIN EN ISO 15482 • 十字槽半沉头自钻自攻螺钉Cross recesd raid countersunk head drilling screws with tapping screw threadDIN EN ISO 15483
• 内六角紧定螺钉—平端Hexagon socket t screws with flat pointDin 913 • 内六角紧定螺钉—截锥端Hexagon socket t screws with cone pointDin 914 • 内六角紧定螺钉—导向圆柱端Hexagon socket t screws with dog pointDin 915 • 内六角紧定螺钉—凹端Hexagon socket t screws with cup pointDin 916 • 十字槽圆头螺钉Cross recesd round head screwsDIN 7996
• 十字槽沉头自攻螺钉（通用头型）Cross recesd countersunk (flat) head tapping screws(common head style)ISO 7050 | 代替DIN 7982 • 十字槽半沉头自攻螺钉Cross recesd raid countersunk (oval) head tapping screwsISO 7051 | 代替DIN 7983
• 小六角头长圆柱导向端紧定螺钉Hexagon t screws with small hexangon and full dog pointDIN
啤酒的保质期
561
• 小六角头短圆柱导向锥端紧定螺钉Hexagon t screws with samll hexagon,half dog point and flat c
one pointDIN 564 • 钢结构用—大六角头高强度螺栓和六角螺母连接副Steel hexagon fit bolts for structural steel bolting for supply with hexagon nuts DIN 7968
• 钢结构用—六角头螺栓和六角螺母连接副Steel hexagon head bolts for structural steel bolting for supply with hexagon nuts DIN 7990
• 十字槽半沉头（通用头型）螺钉－产品等级A级Countersunk raid head screws (common head style) with type H or type Z cross recess-Product grade A DIN EN ISO 7047 | 代替DIN 966 • 十字槽圆柱头螺钉Cross recesd chee head screws DIN EN ISO 7048
• 滚花指旋螺钉DIN 464-86 • 滚花薄头指旋螺钉DIN 653-80
• 带螺杆的六角头螺钉DIN 7964-77 • 开槽大盘头螺钉DIN 921-86
• 十字槽球面圆柱头螺钉DIN 7985-86 • D esignation system for fasteners DIN 962
• P lastic washers. Standard ries DIN 34815 • Slotted t screw s with flat point
DIN EN 24766 • Slo tted t screws with cone point DIN EN 27434
• Slotted t screws with long dog point DIN EN 27435 • Slotted t scre ws with cup point
DIN EN 27436 • Slotted chee head screws DIN EN ISO 1207
• Slotted pan head screws DIN EN ISO 1580 • Slotted countersunk flat head screws (common head style DIN EN ISO 2009 • Countersunk slotted raid head screws(comm on head style) DIN EN ISO 2010 • Slo tted headless screws with shand DIN EN ISO 2342
• Hexagon hea d screws(Product grade A and B DIN EN ISO 4017
• Hexag on head screws(Product grade C) DIN EN ISO 4018
• Hexagon socket t scr ews with flat point DIN EN ISO 4026
• Hexagon so cket t screws with cone point DIN EN ISO 4027
• Hexagon s ocket t screws with dog point DIN EN ISO 4028
• Hexagon s ocket t screws with cup point DIN EN ISO 4029
• Hexagon socket head cap screws DIN EN ISO 4762
• Pan head screws with H or type Z cross recess(Product grade A) DIN EN ISO 7045
• Countersunk flat head screws(common head style)with type H or type Z cross recess(Product grade A) DIN EN ISO 7046-1
• Countersunk flat head screws(common head style)with type H or type Z cross recess(Product grade A) DIN EN ISO 7047 • Countersunk flat head screws DIN EN ISO 7048
• He xagon socket button head screws DIN EN ISO 7380
• Hexagon head screws with metric fine pitc h thread(Product grade A and B) DIN EN ISO 8676 • Tapping screw and washe r asmblies with plain washers DIN EN ISO 10510
• Hexagon socket countersunk head screws DIN EN ISO 10642
• H exalobular socket head cap screws DIN EN ISO 14579
• Hexalo bular socket chee head screw DIN EN ISO 14580
• Hex alobular socket pan head screws DIN EN ISO 14583
• Hexalobular socket raid countersunk head screws DIN EN ISO 14584
• Scres and washer asmblies with plain washers(Washer hardness class 200 HV and 300 HV) DIN EN ISO 10644
• Hexalobular soc ket pan head tapping screws DIN EN ISO 14585
• Hexa lobular socket countersunk head DIN EN ISO 14586
• Hexalobular socket raid c ountersunk(oval)head tapping screws DIN EN ISO 14587
• Hexagon washer head drilling s crews with tapping screw thread DIN EN ISO 15480
• Cross recesd pan head drilling screws with tapping screw thread
DIN EN ISO 15481
• Cross recesd countersu nk head drilling screws with tapping screw thread DIN EN ISO 15482 • Cross recesd raidcountersunk head drilling screws with tapping screw thread陶渊明的名言
DIN EN ISO 15483
• Countersin ks. For countersunk head screws DIN 66
• Countersin ks. For countersunk head screws DIN 74
• Screw threads DIN 202 • Thread rolling screws DIN 7500
• Tapping screw connections DIN 7975 • Threads and thread ends DIN 7998
• Wire thread inr ts for ISO metric screw threads DIN 8140-1
• Countersunk he ad screws DIN EN 27721 • Tapping screw threads DIN EN ISO 1478 • 十字槽螺丝Cross recess for screws DIN EN ISO 4757
• 螺栓和螺钉用内板拧的六角花形Hexalobular internal driving feature for bolts and screws
DIN EN ISO 10664
• 十字槽沉头螺钉ISO general purpo metric screw threads-tolerances DIN ISO 965
• 十字槽沉头螺钉ISO general purpo metric screw threads-tolerances DIN ISO 965-2
• 十字槽沉头螺钉ISO general purpo metric screw threads-tolerances DIN ISO 965-3
• 十字槽沉头螺钉ISO general purpo metric screw threads-tolerances DIN ISO 965-4
• 十字槽沉头螺钉ISO general purpo metric screw threads-tolerances DIN ISO 965-5
小学作文300字
内六角螺钉
• 内六角沉头螺钉Hexagon socket countersunk head screws DIN EN ISO 10642 | 代替DIN 7991 • 薄圆柱头内六角螺钉Hexagon socket thin head cap screws DIN 7984
• 圆柱头内六角螺钉Hexagon socket head cap screws DIN EN ISO 4762 | 代替DIN 912
• 内六角平圆头螺钉Hexagon socket button head screws DIN EN ISO 7380
• 圆柱头内六角花形钢制螺钉Steel hexalobular head cap screws with large driving feature
DIN 34802
• 薄圆柱头内六角螺钉Hexagon socket thin head cap screws with pilot recess for wrench key
DIN 6912
• 六角花形小法兰面钢制螺栓Steel hexalobular head bolts with small flange DIN 34800
自攻螺钉
• 六角头自钻自攻螺钉Hexagon washer head drilling screws with tapping screw thread
DIN EN ISO 15480 | 代替DIN 7504
• 六角凸缘头自钻自攻螺钉Hexagon washer head drilling screws with tapping screws thread
DIN EN ISO 15480
• 十字槽盘头自钻自攻螺钉Cross recesd pan head drilling screws with tapping screw thread
梦想改造家第一季
马史DIN EN ISO 15481
• 十字槽盘头自钻自攻螺钉Cross recesd pan head drlling screws with tapping screw thread
DIN EN ISO 15481 | 代替DIN 7504
• 十字槽沉头自钻自攻螺钉Cross recesd countersunk head drilling screws with tapping screw thread DIN EN ISO 15482 | 代替DIN 7504
• 十字槽半沉头自钻自攻螺钉Cross recesd raid counterunk head drilling screws with tapping screw thread DIN EN ISO 15483 | 代替DIN 7504
• 自钻自攻螺钉Drilling screws with tapping screw thread DIN EN ISO 10666 | 代替DIN 7504 • 六角头和开槽头三角牙螺钉—尺寸、技术要求及试验Hexagon head and slotted head thread cutting screws - Dimensions,requirements and testing DIN 7513
• 十字槽螺纹滚成自攻螺钉—尺寸、技术要求及试验Cross recesd head thread cutting screws - Dimensions,requirements and testing DIN 7516
• 米制螺纹滚成自攻螺钉—型式、名称及技术要求ISO metric thread rolling screws -
Types,designation and requirements DIN 7500-1
• 米制螺纹滚成自攻螺钉—预制孔直径尺寸方案Tread rolling screws for ISO metric thread - Guideline values for hole diameters DIN 7500-2
• 紧固件供货技术条件—米制螺纹—性能等级为10.9级的螺纹滚成自攻螺钉Technical delivery conditions for fasteners - Metric thread rolling screws of property class 10.9 DIN 267-30
• 十字槽盘头凸缘自攻螺钉Cross recesd pan head tapping screws with collar DIN 968
• 六角凸缘自攻螺钉Hexagon washer head tapping screws DIN 6928
• 自攻螺钉用螺纹Tapping screw threads DIN EN ISO 1478 | 代替DIN 7970
• 六角头自攻螺钉Hexagon head tapping screws ISO 1479 | 代替DIN 7976
• 开槽盘头自攻螺钉Slotted pan head tapping screws ISO 1481 | 代替DIN 7971
• 开槽沉头自攻螺钉（通用头型）Slotted countersunk(flat)head tapping screws(common head style) ISO 1482 | 代替DIN 7972
• 开槽半沉头自攻螺钉（通用头型）Slotted raid countersunk (oval) head tapping screws(common head style) ISO 1483 | 代替DIN 7973
• 十字槽盘头自攻螺钉Cross recesd pan head tapping screws ISO 7049 | 代替DIN 7981
木螺钉
• 开槽半沉头木螺钉Slotted raid countersunk(oval) head wood screws Din 95
• 开槽半圆头木螺钉Slotted round head wood screws Din 96
• 开槽沉头木螺钉Slotted countersunk(flat) head wood screws Din 97
• 六角头木螺钉Hexagon wood screws Din 571
• 十字沉头木螺钉Cross recesd countersunk (flat) head wood screws DIN 7997
螺杆和螺柱
• 牙条Threaded rod DIN 975 • 螺杆Metric thread stud bolts DIN 976-1
• 螺杆—过盈配合螺纹Metric interference-fit thread stud bolts DIN 976-2
• Welding studs f or turnbuckles DIN 34828
• High-strength structural bolting asmblies. For preloading DIN EN 14399-3
• High-strength structural bolting asmblies. For preloading DIN EN 14399-4
• Hexagon bolts with flange-Small ries DIN EN 1662
• Hexago n bolts with flange-Heavy ries DIN EN 1665
• Hexagon bolts with flang e with metric fine pitch thread DIN EN 14219
• High-strength structural bolting asmblies for preloading DIN EN 14399-3
• High-strength structural bolting asmblies for preloading DIN EN 14399-4
• Hexago n head bolts with reduced shank DIN EN 24015
• Hexagon he ad bolts(Product grade A and B) DIN EN ISO 4014
• Hexa gon head bolts(Product grade C) DIN EN ISO 4016
铆钉
• 半圆头钢铆钉—公称直径10~36mm Steel round head rivets with nominal diameters from 10 to 36 mm DIN 124
• 沉头钢铆钉—公称直径10~36mm Steel countersunk head rivets with nominal diameters from 10 to 36 mm DIN 302
