High Power Ready-to-U DIN Rail Mounted SSRs
CMR Series
世界最大国家
CMR 35-10
E P 24A Series
Operational Current 35: 35 Amps 45: 45 Amps 55: 55 Amps 65: 65 Amps
Overvoltage Protection Blank: Not Included P: Included
Control Voltage D: 4-32 VDC A: 90-140 VAC
Switching Mode
Blank: Zero Voltage Turn-On -10: Random Turn-On
Operational Voltage 24: 24-280 VAC 48: 48-530 VAC 60: 48-660 VAC
Input Range
Blank: Standard Input E: 18-36 VAC
PART NUMBER NOMENCLATURE
Required for valid part number
For options only and not required for valid part number
Crydom CMR Series Solid State Relays were developed to offer the advantages of miconductor switching technology in a compact, lf contained package. Quick and easy installation is coupled with low drive power requirements and efficient, reliable power SCR output. This compact new design offers up to 65 Arms in ambient temperatures of 25ºC.
科幻小说Mounting clip incorporates tabs for screw mounting to panel Box Clamp terminals
Bracket fits all standard 35 mm DIN rail profiles LED input status indicator
FEATURES
IMPORTANT CONSIDERATIONS
Mounting Air Gap (A)
Earth Bonding (Grounding)
To achieve maximum ratings if multiple units are installed, there must be a minimum air gap of 1.6 in (40 mm) between the devices (horizontally) and of 3.15 in (80 mm) measured between DIN clip tabs (vertically).
The CMR heat sink is equiped with an earth bonding screw as is required for Class 1 Protection, in accordance with EN 60950 (VDE 0804). Recommended torque is 20 in-lbs (2.2 Nm).
网络小说推荐
Rev: 080111
MOUNTING INSTRUCTIONS
Mounting on DIN Rail
Mounting on Panel
Plea read all installation instructions before using CMR Series SSRs.Choo one of the two mounting options and follow the instructions below.
Locate the panel ction on which the CMR SSR will be mounted on.DIN clip includes tabs for this type of mounting. Tab holes have a diameter of 4.5 mm. You will need two screws (not included) no larger than that to mount the SSR onto panel.
腊肠怎么做
Align SSR tabs with panel surface and screw both top and bottom sides. Recommended torque is 12 in-lbs (1.36 Nm).
Locate rail and align with non moveable end of CMR DIN clip.古代造句
Using reasonable force, push CMR in the direction of the arrow shown in fig.1.
For removal pull relea tag in direction of arrow using blade of screwdriver and pull it away from DIN rail.
仰
fig.1 Mounting on DIN Rail
Wire Size
Maximum wire size of AWG #8 (8.4 mm 2) for input and output terminals.Connections
Ensure that wires ends are stripped to a minimum length of 0.4 in (10 mm).
手机综合症Recommended Screw Torque Range
5-6 in-lbs (0.6-0.7 Nm) on input and 10-15 in-lbs (1.1-1.7 Nm) on output terminations.
The following deating curves must be obrved before installation.
DERATING CURVES (B)长相思是一首什么
O u t p u t C u r r e n t (A r m s )
Ambient Temperature (ºC)
(A)(B)The air gap is the clearance distance adjacent to either side of the relay or asmbly measured to the next clor relay or asmbly.100% Duty Cycle.
R e v : 080111
分销商库存信息:
CRYDOM
CMRD4855CMRD4845CMRD6035 CMRA4835CMRD4845-10CMRA4835E CMRD6035-10CMRA4835-10CMRA4845 CMRD6045CMRA6035CMRA4845-10 CMRD6045-10CMRA6035-10CMRD4855-10 CMRD6055CMRA4855-10CMRD6055-10 CMRA6055CMRD4865CMRD4865-10 CMRA4865CMRD6065CMRA4865-10 CMRD6065-10CMRA6065CMRA6065-10
