1.0 Purpo 目的
The objective of this 独面筋的家常做法procedure is to define a standard inspection method in performing inspection and testing of components or materials.
本程序目的在于定义对元件或材料进展检验/测试的标准操作方法。
2.0 Scope 适用范围
This procedure is applicable to all components and materials that require the relevant inspection and testing, as specified in the individual Part or Material Specification.
本程序适用于全部依据元件和材料规格进展检验和测试的元件和材料。
3.1Sampling / Equipment Ud 取样 / 使用设备
3.2Per sampling plan stated in the Incoming Inspection Procedure: AQL：MA=0.4、做一天和尚撞一天钟MI=1.0
依据来料检验程序所规定的抽样打算；AQL:MA=0.4、MI=1.0 级别进展抽样.
3.3Inspection关于鹏的诗句 Aids 检验工具
4.2.1LCR Meter / LCR 测量仪
4.2.2Fluke Multimeter / Fluke 万用表
4.2.3Caliper / Plug Gauge / Pin Gauge / 游标卡尺/ 塞规/针规
4.2.4Magnifier / Microscope / 放大镜 / 显微镜
4.0 Reference Documents 参考文件
3.1Customer’s A客VL户/承受的供给商清单
3.2Manufacturer Part Specification / 供给商的元件规格
3.3Yamaoka AVL List / 本公司的 AVL
3.4QAP-010 : Incoming Inspection Procedure / 来料检验程序
3.5SOP-QA-003 : Material Aging Control Procedure / 物料保质期把握程序
5.1Inspection Criteria / 检验要点
5.2MFG AVL Verification / 生产厂商确认
Verify张组词组 that the parts are from the authorized vendor徐徐清风 per AVL list.
依据 AVL 清单验证元件是否为成认厂商。
5.3MFG Part Number Verification / 生产厂商料号确认
Verify that manufacturer part number and description are correct per PO and DO.
依据 PO 和 DO 验证生产厂家料号和元件种类.
5.4Packaging&RoHS Verification / 包装、环保确认
Verify that the part is packed in correct/proper packaging as indicated in manufacturer p/n and/or engineering requirement. Check if there are part number and vendor name marked on 桃蕊every packing box or container. Whether RoHS materials? The Customer material should pay attention to whether have original packaging label;
验证元件的包装与厂家料号和/或工程需要是否全都适当,是不是环保材料。检查每个包装箱外是否标明品名和厂商名. 对客供物料需留意包装上是否有原厂标签；
5.5Visual Inspection / 外观确认
Carry out visual inspection on samples, if confirmation of defects is required, u visual aids or equipment such as 5X magnifying glass, microscope etc to check.
对来料样品进展外观检验，假设必要，可使用 5 倍放大镜，显微镜等关心设备进展检验。
5.6Part Dimensional Check / 尺寸确认
Measure samples on critical dimensions that are highlighted in the respective part drawing or specification. 5 data to be recorded.
根各元件的规格对抽样样品进展尺寸检验；记录 5 个检验数据；
5.7Part Value Measurement / 测值
For inductors/capacitors/resistors, need to perform value measurements using LCR meter that record 5PCS per datecode according to AVL and manufacturer’s specifications. 5 data to be recorded.
对于电感/电容/电阻元件，需依据 AVL 和厂家的标准，利用 L/C/R 测量仪进展测值，每
D/C 抽样 5PCS。各记录 5 个数据 ；
5.8Date Code Verification / 生产日期确认
For PCB, D/C should be within 6 months from date of manufacture,machine part 、LED、
connecter 、 moisture nsitive components within 1year. For other electronic components
〔passive、disper〕, D/C should be within 2 years and for chemistries, the expiry date shall be verified according to Material Aging Control Procedure, SOP-QA-003 .
对于印刷线路板，保质期需把握在生产日期后半年之内； 构造件、LED、连接器、湿敏元件为 1 年内，其他的电子〔被动和离散〕元件，生产日期需把握在 2 年之内。对于化学药品，失效日期依据物料保质期把握流程执行，文件号码：SOP-QA-003.
5.9Certificate of Conformance (COC) Verification / 出厂检验报告确认
For PCB and Chemical items, COC must be 单亲家庭的孩子provided by supplier for every delivery lot.
对于印刷线路板和化学药品需要供给商对每一批次供给COC.
5.10Solderability & Electrical Test / 可焊性/电气测试
If the component has exceeded their shelf life, solderability and/or electrical test shall be conducted according to Material Age Control Procedure.
假设元器件超过保质期限，依据物料保质期把握流程执行可焊性测试和/或电气测试。
自愧不如的近义词
