PROPRIETARY NOTE
有皱纹
TITLE : VISUAL INSPECTION CRITERIA FOR ALL CUSTOMERS
-7" WSVGA
＋,Q Grade
SPEC. NUMBER PRODUCT GROUP ISSUE DATE PAGE B2006-5006-O (1/3)
A4(210 X 297)
THIS SPECIFICATION IS THE PROPERTY OF BOEOT AND SHALL NOT BE REPRODUCED OR COPIED WITHOUT THE WRITTEN PERMISSION OF BOEOT AND MUST BE RETURNED TO BOEOT UPON ITS REQUEST.
REV. 1 OF 10
2011-2-12
TFT-LCD PRODUCT
A
BEIJING BOE OPTOELECTRONICS THCHNOLOGY
PROUCT GROUP REV.
ISSUE DATE
TFT PRODUCTS
A
Contents
Revision History (3)
1.0 Introduction
1.1. 41.2. Incoming 41.3. Handling Precautions.. (4)
2.1. .52.2. 52.3. Definitions (5)
3.0 Inspection Criteria
3.1. Visual 73.2. Apperarence Inspection Criteria.. (8)
4.0 RMAs
4.1. 94.2. Supplier 94.3. Customer 94.4. RMA Shipment LCMs shipment (9)
5.0 Warranty
5.1. 105.2. 105.3. Warranty avoidance (10)
6.0 Others (10)
SPEC. NUMBER
SPEC. TITLE
PAGE VISUAL INSPECTION CRITERIA FOR ALL CUSTOMER
2 OF 10
(7"WSVGA ＋-Q Grade)
B2006-5006-O (1/3)敦厚的意思
A4(210 X 297)
2011-2-12
2.0 Generals 0
TFT PRODUCTS
A
REVISION HISTORY
卤鸭子REV.ECN NO. DESCRIPTION OF CHANGES DATE PREPARED
O INITIAL RELEASE
A
Sub Pixel Defect inspection criteria is modify
SPEC. NUMBER
SPEC. TITLE
PAGE VISUAL INSPECTION CRITERIA FOR ALL CUSTOMER
3 OF 10
(7"WSVGA ＋-Q Grade)
B2006-5006-O (2/3)cpu占用高
A4(210 X 297)
JIN ZI MING
2011.02.12
2011-2-12
-KOUSHIZHE 2010.10.210
-
1.0 Introduction
1.1. Scope
call the "LCMs") supplied by BOEOT(hereafter called the "Supplier") to its Customer.
The Customer shall have the right to conduct at its own cost and expen,an incoming inspection of the LCMs at the destination specified in the relevant B/L(Bills of Lading) in criteria t forth in this article.
The customer shall notify the Supplier in writing of the inspection results(acceptance or rejectance) in accordance with the said Incoming Inspection Standard within 40 days from the date of the B/L.
Should the Customer fail to notify the results to Supplier with 40 days period, the right to reject the LCMs shall then lap,and the said LCMs shall be deemed to have been accepted by the Customer.1.3. Handling Precautions
德裔美国人
broken or cracked if dropped it. So Plea handle them with care.
小鲶鱼
-. DO NOT press the area covered with PET or such materials.The are weak point of LCMs since of TCPs(Driver ICs) and PWBs.
-. Plea support the Bezel with your finger when connecting the interface cable. Semiconductive devices are included in the LCMs and they should be handled with care to prevent any electrosta
tic discharge(ESD).
-. DO NOT stack the LCMs too high without wrapping material such as AIR CAP. -. Before u the LCMs,Plea check the Engineering specification.
-. LCMs contain a small amount of Liquid Crystal and Mercury.Plea follow local ordinances or regulations for disposal.
SPEC. NUMBER
SPEC. TITLE
PAGE VISUAL INSPECTION CRITERIA FOR ALL CUSTOMER
4 OF 10
(7"WSVGA ＋-Q Grade)
B2006-5006-O (3/3)
A4(210 X 297)
-. LCM Devices are made of fragile material such as Glass and plastic and may be This incoming Inspection Standard shall be applied to TFT-LCD modules(hereafter -. Plea wear the Wrist Strap when handling.
-. Plea DO NOT touch the surface of the Glass(Polarizer).1.2. Incoming inspection Right accordance with the LCM's specifications parately agreed upon and the inspection -. Plea keep the LCMs in the specified,original packing boxes when storage.
2.0 Generals
2.1. Sampling Method
Unless otherwi agreed upon in writing ,the sampling inspection shall be applied to
the Customer's incoming inspection.
2.1.1. Lot size :1 pallet per same model
2.1.2. Sampling type : Random sampling
2.1.
3. Inspection level : II
2.1.4. Sampling table : MIL-STD-105E
2.2. Inspection Environment
30CM~50CM
2.2.1. Ambient conditions
目标成本管理
b. Relative Humidity : 65 ± 20%RH
c. Ambient Illumination : 300~700 LUX (Normal:500LUX)
2.2.2. Viewing Distance
2.2.
3. Viewing Angle
performing in front of the panel
[ Vertical ] : ± 25 degree
[ Horizontal ] : ± 40 degree
2.2.4. Inspection Area :
Display Area (Active Area)
2.3.1. Dark / Bright Spots
Points on display which appear dark/bright and usually result from the contamination.
The defects do not vary in size or intensity (contrast) when contrast is varied.
2.3.2.Dark / Bright Lines
Lines on display which appear dark/bright and usually result from the contamination.
SPEC. NUMBER SPEC. TITLE PAGE
VISUAL INSPECTION CRITERIA FOR ALL CUSTOMER 5 OF 10
(7"WSVGA＋-Q Grade)
鲍晶晶B2006-5006-O (3/3)A4(210 X 297)
a. Ambient Temperature : 23 ±2 ℃
The distance between the LCM and the inspector's eyes shall be at least 30CM~50CM
2.3. Definitions
