3 Double Coated Tape With Thin PET Film 55256(Temporary)
醋泡黑豆的做法55256: 3M™ Double Coated Tape with a thin polyester film for dimensional stability and improved handling with ea of die cutting and laminating. The high tack adhesive provides relatively high initial adhesion and good shear holding power to a variety of surfaces.
Construction 55256
Faceside 1 Adhesive Type/Thickness: Acrylate /0.0007"(0.018mm)
Backside 2 Adhesive Type/Thickness: Acrylate/0.0007"(0.018mm)
Liner Color, Type, Print
White, 55# SCK, No print
蒸西兰花Liner Caliper: 0.003"(0.076mm)
Carrier Type: Clear PET 3 /0.0005"(0.012mm)
Product
Description Note 1: Faceside adhesive is on the interior of the roll, expod when unwound. Note 2: Backside adhesive is on the exterior of the roll, expod when liner is removed. Note 3: PET (Polyester)
3TM Double Coated Tape with Thin PET Film 55256
Note : The following technical information and data should be considered
reprentative or typical only and should not be ud for specification purpos. Product Number 55256
Oz/in (N/100mm) 64(70)
男生拍照技巧70(76)
60(65) 55(60) 60(65)
10000 minutes Relative solvent resistance Medium-Low UV Resistance Medium Relative High Temperature
Operating Ranges:
Long Term (days, weeks) 80℃狗拉稀怎么回事
Short Term (minutes, hours) 150℃ Shelf Life of Tape in Roll Form 24 months from date of manufacture when stored in original cartons at 70˚ F (21℃) and 50% relative humidity.
Typical Physical Properties and Performance Characteristics Adhesion to stainless steel ASTM D3330-180 degree,2 mil PET - 15 minute RT - 72 hour RT Adhesion to PET ASTM D3330 –180 degree, 2mil PET -15minute RT Adhesion to other surfaces ASTM D3330 – 180 degree, 2 mil PET, 15 minutes RT ABS Polycarbonate Shear Strength – ASTM D3654 (1 inch 2 sample size) 1000grams at 72˚ F (22℃)
3TM Double Coated Tape with Thin PET Film 55256
好听的钢琴曲
Application Bond strength is dependent upon the amount of adhesive-to-surface Techniques contact developed. Firm application pressure helps develop better adhesive
contact and improves bond strength.
To obtain optimum adhesion, the bonding surfaces must be clean,
dry and well unified. Some typical surface cleaning solvents are isopropyl
alcohol or heptane.
Note: Carefully read and follow the manufacturer’s precautions and directions for u when working with solvents.
Ideal tape application temperature range is 70°F to 100°F (21°C to38°C). Initial
tape application to surfaces at temperatures below 50°F (10°C) is not recommended becau the adhesive becomes too firm to adhere readily. However, once properly applied, low temperature holding is generally satisfactory.
General All tapes have a film carrier, which can add dimensional stability to
Information foams and other substrates. The carrier also provides easier handling during
slitting and die-cutting.
Features 3M™ Adhesive is a medium-firm acrylic adhesive system featuring both high
initial adhesion and good high temperature holding power.
Application • Medical/non-medical diagnostic test strips
打麻将公式
Ideas • Plastic film lamination/bonding
• Splicing
• Foam lamination
Application Equipment To apply adhesives in a wide web format, lamination equipment is required to ensure acceptable quality. To learn more about working with pressure-nsitive adhesives plea refer to technical bulletin, Lamination Techniques for Converters of Laminating Adh
esives.
For additional dispenr information, contact your local 3M sales reprentative.
3TM Double Coated Tape with Thin PET 55256
This Engineered Adhesives Division product was manufactured under a 3M quality system registered to ISO 9002 standards.
Certification/ Recognition MSDS: 3M has not prepared a MSDS for the products which are not subject to the MSDS requirements of the Occupational Safety and Health Administration’s Hazard Communication Standard, 29 C.F.R. TSCA: The product are defined as articles under the Toxic Substances Control Act and therefore, are exempt from inventory listing requirements.
哺乳动物的特征
Important Notice 3M MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Ur is responsible for determining whether the 3M product is fit for a part
icular purpo and suitable for ur’s method of application. Plea remember that many factors can affect the u and performance of a 3M product in a particular application. The materials to be bonded with the product, the surface preparation of tho materials, the product lected for u, the conditions in which the product is ud, and the time and environmental conditions in which the product is expected to perform are among the many factors that can affect the u and performance of a 3M product. Given the variety of factors that can affect the u and performance of a 3M product, some of which are uniquely within the ur’s knowledge and
control, it is esntial that the ur evaluate the 3M product to determine whether it is fit for a particular purpo and suitable for the ur’s method of application. Limitation of Remedies and Liability If the 3M product is proved to be defective, The exclusive remedy, at 3M’S option, shall be to refund the purcha price of or to repair or rplace the defective 3M product. 3M shall not otherwi be liable for loss or damages, whether direct, indirect, special, incidental, or conquential, regardless of the legal theory asrted, including, but not limited to, contract, negligence, warranty, or strict liability. 3
细枝末节的近义词3M Maxdo, Xingyi Road 8
Shanghai, PRC. ● 3 2004
