DELO-DUALBOND OC VE 512448 - 02.11 (Revision 1)
PRELIMINARY DATA SHEET
DELO-DUALBOND® OC VE 512448
light and humidity-curing acrylate adhesive, low viscosity
Ba
- modified acrylate
- one-component, solvent-free
U
- optically clear adhesive for full area glass to glass bonding, e.g. display bonding, touch panel bonding or window lamination
- highly flexible, tension-equalizing
- compliant with RoHS directive 2002/95/EC
Processing
- supplied ready for u and can be procesd well from the original container or with DELO dispensing units
诗配画简单又好看- the surfaces to be bonded must be dry as well as free of dust, grea and other contaminations - u DELOTHEN cleaners for the cleaning of bonding surfaces
- u DELOTHEN EP cleaner for the cleaning of glass
-
for further information plea refer to the instructions for u
Curing
- with UV light or visible light in a wavelength range of 320 - 420 nm and by humidity in shadow zones
王者荣耀开挂软件
排列数公式- curing starts at the surface of the acrylate (contact with the air humidity); a skin is formed after
a few hours
- deep curing of the acrylate proceeds with approx. 2mm/24h
Absorption spectrum
- photoinitiation system in acrylate matrix
Curing parameters
- dependent on material thickness and absorption, adhesive layer thickness, lamp type and distance between lamp and adhesive layer
Technical data
colorless clear
Color
cured in a layer thickness of approx. 0.1 mm
祝身体健康的祝福语Density [g/cm³] 1.0
1200
Viscosity [mPas]
at 23 °C, rheometer
6
Minimal curing time [s]
DELO Standard 23, UVA intensity: 60 mW/cm², DELOLUXcontrol
Index of refraction
1.4650
cured product
Compression shear strength glass/glass [MPa]
1
DELO Standard 5
UVA intensity: 55 - 60 mW/cm², DELOLUXcontrol, irradiation time: 60 s
Elongation at tear [%]
椰树叶
270
五月初夏
DIN EN ISO 527
awkard
2.4
initial b* value
DELO Standard 25
3.5
Shrinkage [vol. %]
DELO Standard 13
Water absorption [%]
0.9
according to DIN EN ISO 62, 24 h at room temperature (approx. 23 °C)
3 months
Storage life
at +5 °C in unopened original container
Instructions and advice
General
The data and information provided are bad on tests performed under laboratory conditions. Reliable information about the behavior of the product under practical conditions and its suitability for a specific purpo cannot be concluded from this.
Many product properties are subject to temperature and may change permanently, especially at high temperatures.
It is the ur’s responsibility to test the suitability of the product for the intended purpo and temperature range of u by considering all specific requirements. Type and physical and chemical properties of the materials to be procesd with the product, as well as all actual influences occurring during transport, storage, processing and u, may cau deviations in the behavior of the product compared to its behavior under laboratory conditions. All data provided are typical average v
alues or uniquely determined parameters measured under laboratory conditions.
The data and information provided are, therefore, no guarantee for specific product properties or the suitability of the product for a specific purpo. This is a test product. The product is, therefore, subject to modifications.
Instructions for u
The instructions for u of DELO-DUALBOND are available on: www.DELO.de. We will be plead to nd them to you on demand.
Occupational health and safety
e material safety data sheet
Specification
橄榄油食用方法e quality assurance test report
DELO-DUALBOND OC VE 512448 - 02.11 (Revision 1)
