SPX1117M3-3.3

更新时间:2023-07-20 10:07:33 阅读: 评论:0

DESCRIPTION
FEATURES
■  Guaranteed 0.8A Output Current  ■  Guaranteed 1A Peak Current
■  Three Terminal Adjustable or Fixed  1.5V, 1.8V, 2.5V, 2.85V, 3.0V,  3.3V and 5V
■  Low Quiescent Current
■  Low Dropout Voltage of 1.1V at 0.8A  ■  0.1% Line and 0.2% Load Regulation  ■  Stable with 2.2uF Ceramic Capacitor  ■  Overcurrent and Thermal Protection  ■  Available Packages: SOT-223,TO-252,  TO-220, and TO-263
The SPX1117 is a low power positive-voltage regulator designed to satisfy moderate power requiremen
ts with a cost effective, small footprint solution.  This device is an excellent choice for u in battery-powered applications and portable computers.  The SPX1117 features very low quiescent current and a low dropout voltage of 1.1V at a full load. As output current decreas,quiescent current flows into the load, increasing efficiency. SPX1117 is available in adjustable or fixed 1.5V, 1.8V, 2.5V,2.5V, 2.85V, 3.0V, 3.3V and 5V output voltages.
The SPX1117 is offered in veral 3-pin surface mount packages: SOT-223, TO-252, TO-220and TO-263. An output capacitor of 10µF provides unconditional stability while a smaller 2.2µF capacitor is sufficient for most applications.
APPLICATIONS
■  Desktop PC's Servers ■  SCSI-II Active Terminator
■  Portable/ Palm Top / Notebook Computers
■  Cordless Phones ■  Battery Chargers ■  Disk Drives
■  Portable Consumer Equipment ■  Portable Instrumentation ■  SMPS Post-Regulator
FUNCTIONAL DIAGRAM
OUT
IN
µA
Now Available in Lead Free Packaging
ELECTRICAL CHARACTERISTICS
T
A  = 25°C, C
IN
= C
OUT
= 10µF, unless otherwi specified.  The Boldface applies over the full operating temperature range.
PARAMETER CONDITIONS MIN TYP MAX UNITS 1.5V Version
Output Voltage I
OUT  = 10mA, V
IN
=3.0V, T
J
= 25ºC  1.485  1.500  1.515V
10mA ≤ I
OUT ≤ 800mA, 2.9V ≤ V
IN
≤ 10V  1.470  1.530
1.8V Version
Output Voltage I
OUT  = 10mA, V
IN
=3.3V, T
J
= 25ºC  1.782  1.800  1.818V
10mA ≤ I
OUT ≤ 800mA, 3.2V ≤ V
IN
≤ 10V  1.764  1.836
2.5V Version
Output Voltage I
OUT  = 10mA, V
IN
=4.0V, T
J
= 25ºC  2.475  2.500  2.525V
10mA ≤ I
什么水果补锌
OUT ≤ 800mA, 3.9V ≤ V
IN
≤ 10V  2.450  2.550
徒孙2.85V Version
批改Output Voltage I
OUT  = 10mA, V
IN
=4.35V, T
公司声明
J
= 25ºC  2.821  2.850  2.878V
10mA ≤ I
OUT ≤ 800mA, 4.25V ≤ V
IN
≤ 10V  2.793  2.907
3.00V Version
Output Voltage I
OUT  = 10mA, V
IN
=4.5V, T
J
= 25ºC  2.970  3.000  3.030V
10mA ≤ I
OUT ≤ 800mA, 4.4V ≤ V
IN
≤ 10V  2.940  3.060
3.30V Version
Output Voltage I
OUT  = 10mA, V
IN
=4.8V, T
J
= 25ºC  3.267  3.300  3.333V
10mA ≤ I
OUT ≤ 800mA, 4.7V ≤ V
添加水印IN
≤ 10V  3.234  3.366
5V Version
Output Voltage                  I
OUT  = 10mA, V
小孩喜欢吃的菜IN
=6.5V  4.9505  5.050V
坚强后盾10mA ≤ I
OUT ≤ 800mA, 6.4V ≤ V
IN
≤ 12V  4.90  5.10
All Voltage Options
Reference Voltage I
OUT =10mA, (V
IN
- V
OUT
)= 2V, T
J
= 25ºC  1.238  1.250  1.262V
10mA≤I
OUT ≤ 800mA, 1.4V≤(V
IN
-V
OUT
)≤ 10V  1.225  1.270
Output Voltage0.3% Temperature Stability
Line Regulation V
INMIN ≤V
IN
≤ 12V,V
OUT
=Fixed/Adj,
(Note 1)I
OUT
=10mA37mV
Load Regulation10mA≤I
OUT ≤ 800mA,V
OUT
=Fixed/Adj612mV
(Note 1)
Dropout Voltage I
OUT =100mA  1.00  1.10V
(Note 2)I
OUT =500mA  1.05  1.15
I
OUT
=800mA  1.10  1.20
Quiescent Current  4.25V≤V
王安石变法的主要内容
IN ≤ 6.5V510mA
Internally Limited Lead Temperature (soldering, 5 cond
s)    ...............260°C Storage .-65°C to +150°C Operating Junction -40°C to +125°C Input Supply Voltage. (20)
Input to 18.8V .2kV min The are sterss ratings only and functional operation of the device at the ratings or any other above tho indicated in the operation ctions of the specifications below is not implied. Exposure to absolute maximum rating conditions for extended periods of time may affect reliability.
ABSOLUTE MAXIMUM RATINGS
ELECTRICAL CHARACTERISTICS
T A  = 25°C, C IN  = C OUT  = 10µF, unless otherwi specified.  The Boldface applies over the full operating temperature range.PARAMETER CONDITIONS MIN TYP MAX UNITS Adjust Pin Current 50120µA Current  Limit (V IN -V OUT )=5V    1.0
1.5
2.0A Thermal Regulation 25°C, 30mS pul
0.010.1
%/W Ripple Rejection f RIPPLE =120Hz, (V IN -V OUT )=2V,6075dB V RIPPLE =1V PP Long Term Stability 125°C, 1000Hrs
0.03%RMS Output Noi % of V OUT , 10Hz ≤f ≤10kHz
0.003%Thermal Resistance
TO-220 Junction to Ca, at Tab 3°C/W
TO-220 Junction to Ambient 60TO-263 Junction to Ca, at Tab 3TO-263 Junction to Ambient 60TO-252 Junction to Ca, at Tab 6TO-252 Junction to Ambient
126SOT-223 Junction to Ca, at Tab 15SOT-223 Junction to Ambient
156
*Note 1 - For fixed option, V INMIN  = V OUT + 1.5V
- For adjustable option, V INMIN  = V IN - V OUT  = 1.4V
*Note 2 - Dropout voltage is the input voltage minus output voltage that produces a 1% decrea in output voltage with respect to the nominal output voltage at V IN  = V OUT + 1.5V
TYPICAL PERFORMANCE CHARACTERISTICS
Figure 1. Load Regulation for SPX1117M3-3.3;Figure 2. Line Regulation for SPX1117M3-3.3;  V IN =
4.8V I OUT =10mA
Figure 3. Dropout Voltage vs Output Current for SPX1117M3-3.3; V IN =4.8V, C OUT =2.2µF
Voltage Deviation with I OUT =10mA to 1A Step
Figure 6. V OUT  vs Temperature, V IN =2.5V, I OUT =10mA
IN C IN =C OUT =1µF, I OUT  puld from 10mA to Current Limit
IN OUT
IN OUT
IN OUT TYPICAL PERFORMANCE CHARACTERISTICS: Continued
Figure 8. V IN =3.3V, I OUT =10mA
IN OUT IN OUT Figure 14. Output Voltage vs Temperature at different Current Loads, V IN =3.3V, V OUT  = 1.8V Adjustable
Figure 13. Line Regulation vs Temperature. V OUT =1.8V (adjustable), V IN = 3.3V
Figure 15. Line Regulation at I LOAD =800mA over Temperature, V OUT =1.8V adjustable

本文发布于:2023-07-20 10:07:33,感谢您对本站的认可!

本文链接:https://www.wtabcd.cn/fanwen/fan/82/1106680.html

版权声明:本站内容均来自互联网,仅供演示用,请勿用于商业和其他非法用途。如果侵犯了您的权益请与我们联系,我们将在24小时内删除。

上一篇:AD9833
标签:补锌   声明   添加   小孩   坚强
相关文章
留言与评论(共有 0 条评论)
   
验证码:
推荐文章
排行榜
Copyright ©2019-2022 Comsenz Inc.Powered by © 专利检索| 网站地图