PERFORMANCE CHEMICALS FOR SYNTHETIC RESIN & RUBBER INDUSTRIES AND PAINT, INK & PIGMENT INDUSTRIES
1. Emulsifiers for Emulsion Polymerization
2. Pigment Dispersants (Oligomer Type)
3. Resin Modifiers
4. Antistatic Agents
5. Mold Releasing Agents
6. Printing Ink Binders
7. Compounding Ingredients for Paints and Printing Inks
8. Pigment Dispersants (Surfactant Type)
9. Defoaming Agents
10. Plasticizers for Polyurethane-Bad Sealants
IMPORTANT :
Before handling the materials, refer to the current Material Safety Data Sheet for
recommended protective equipment, and detailed precautionary and hazards information. SANYO CHEMICAL PRODUCT OUTLINE
1. Emulsifiers for Emulsion Polymerization
ELEMINOL JS-20
RS-3000Sodium alkyl allyl
sulfosuccinate (Liquid)
ELEMINOL JS-20 is a copolymerizable emulsifier, ud alone or in
combination with other nonionic surfactants in emulsion
polymerization of vinyl acetate, styrene, ethyl acrylate,
butyl acrylate, etc. The resulting emulsion has low viscosity,
氙气灯produces less foam, and is mechanically stable against pha
paration. The resulting film has high water resistance.
单饼
2. Pigment Dispersants (Oligomer Type)
3. Resin Modifiers
Umex Products
Umex Products
Umex products are a ries of acid modified low-molecular-weight polyolefin containing a carboxylic acid anhydride group as the functional group.
The products have a higher degree of modification and lower melt viscosity compared with conventional acid modified polyolefin.The products impart high dispersibility to both pigments and fillers in resins, and the mixture readily adheres to other materials including paint film.When Umex 1010 is added to a mixture of ethylene propylene rubber and polypropylene, the surface of the molded resin is
modified. The contact angle of liquid on the molded resin also decreas. Conquently, adhesion of the resin to a high polar paint (melamine type, polyurethane type, etc.) is improved
dramatically.
When either Umex 100TS or Umex 110TS is added to hot melt adhesives, the workability of the adhesives is enhanced becau their melt viscosity decreas compared with a mixture of a
缨子
viscosity depressant (low molecular polyolefin type), including polyethylene wax, furthermore, the U
mex products improve
the peel strength and creep resistance.
4. Antistatic Agents
5. Mold Releasing Agents
6. Printing Ink Binders
7. Compounding Ingredients for Paints and Printing Inks
SANSTAT 2012A
PELESTAT NC6321
NC7530
230
300
VH230
HC250
HC6800PEG 4000S 6000S SANPRENE IB-422IB-1700D IB-F370IB-129IB-300
拼音版
Cationic surfactant (Liquid)Block-type thermoplastic elastomer (Pellet)
Polyethylene glycol (Flake)
Effective for almost all resins.The products are polymer-alloy type permanent antistatic agents.They impart antistatic properties to resins, and their antistatic effects are long-lasting.PELEST AT NC6321, PELESTAT NC7530 and PELESTAT HC6800 are suitable for styrene resins, while PELESTAT 230,PELEST AT 300, PELESTAT VH230 and PELEATAT HC250 are suitable for polyolefin. See page 6.The products are suitable for application to both foam rubber and latex foam.SANPRENE IB products are binders for special gravure printing inks. They exhibit high adhesion to polyester or nylon film, heat resistance and oil resistance. They are also suitable for
polyurethane lamination film. SANPRENE IB-422 is an
one-component type, and the rest of the SANPRENE IB products in the list are a two-component curing type. See page 6.
8. Pigment Dispersants (Surfactant Type)
9. Defoaming Agents
10. Plasticizers for Polyurethane-Bad Sealants
qq空间网址IONET T-60V COLORIN 302SANFLEX SPX-80SANFLEX GPA-3000SANFLEX LBU-25EB-200
COLORIN EM-104Polyethoxylated sorbitan fatty
acid ester (Liquid)Derivative of polyalkylene
glycol (Liquid)Esterified polyether polyol
(Liquid)
Polyester (Liquid)
消防演练简报
Modified polyester (Liquid)
Polyethyleneglycol-dibenzoate
试卷分析表
(Liquid)Proprietary formulated product (Liquid)
IONET T -60V is a pigment dispersant effective in aqueous solution.
飑COLORIN 302 is an economical defoaming agent for manufacture of acrylonitrile. It exhibits high defoaming properties, improving
product yield and working efficiency.
The products are plasticizers for polyurethane-bad alants.When a top coat is applied to the plasticized polyurethane-bad alant, it minimally bleeds through to the top coat.COLORIN EM-104 is a defoaming agent for the manufacturing process of latex. It exhibits high defoaming properties, improving product yield and working efficiency.