Dry Bulk Truck Blowers
Tuthill Vacuum & Blower Systems • • 800.825.6937
More than 100 years of innovative vacuum pump technology.
KINNEY ®
Vacuum Pumps
Model
CFM / m 3/h HP / kW KT-150C 150 / 255 7.5 / 6KT-300D 300 / 510 15 / 11KT-500D 500 / 850 30 / 22KT-850D 778 / 1322 40 / 30
• Quiet running
• High pumping capacity at high & low pressures
• Triplex piston design: dynamically balanced & practically vibration free • Durable in dirty applications
• No metal-to-metal contact between pump piston & cylinder - clearances are filled with oil Piston Pumps
KT Single-Stage Rotary Piston Pump
KT models include an integral, positive pressure lubrication system to insure reliable lubrication at all pressure levels.
KT pumps are water-cooled. Optional air-cooling systems are available.
Adjustable gas ballast valves are standard for handling water and other vapor loads.
Typical Applications • Vacuum Packaging • Vacuum Furnaces • Vacuum Coating
Model
CFM / m 3/h HP / kW KC-5 5 / 8.5 0.33 / 0.25KC-8 8 / 13.6 0.75 / 0.56KC-15 15 / 25.5 1 / 0.75KTC-21 21 / 36 1.5 / 1.1KTC-60 60 / 102 3 / 2.2KTC-112 107 / 182 7.5 / 5.6
• Recommended for applications where operating pressure is below 0.1 Torr (0.13 mbar)• Achieve lowest possible pressures from mechanical pumps • Rugged and reliable
• No metal-to-metal contact between pump piston & cylinder - clearances are filled with oil • Unequaled durability, even in dirty applications
KC and KTC Two-Stage Rotary Piston Pumps
KC & KTC pumps are air-cooled. KTC-112 is water-cooled with optional air-cooling systems.Adjustable gas ballast valves are standard for handling water and other vapor loads.
KTC pumps feature triplex piston design: dynamically balanced & practically vibration free.
Typical Applications
• Evacuating Refrigeration Systems • Liquid Gas Storage • Brake Filling Systems
• Low-Pressure Chemical Vapor Deposition (LPCVD)
• Silicon Crystal Growing • Leak Detection
Model
CFM / m 3/h HP / kW KD-30 33 / 56 1.5 / 1.11KD-50 52 / 88 2 / 1.5KDH-130 134 / 227 5 / 3.7KDH-150 165 / 280 7.5 / 5.6
• Absolute pressures down to the low micron range • Belt-driven, low-speed rotary piston pumps • No
small orifices to plug up • Rugged and reliable
• No metal-to-metal contact between pump piston & cylinder - clearances are filled with oil • Adjustable gas ballast permits handling of condensible vapors KD and KDH Single-Stage Duplex Rotary Piston Pumps
KD pumps are air-cooled.KDH pumps are water-cooled.
不慌不忙造句Typical Applications • Drying Chambers • De-gasifiers
• Filling Machinery
• Evacuation of Process Chambers
Model
CFM / m 3/h
HP / kW
KLRC-75 70 / 120 5 / 3.7KLRC-100 100 / 170 7.5 / 5.5KLRC-125 140/ 240 10 / 7.5KLRC-200 200 / 340 15 / 11KLRC-300 300 / 510 25 / 18.5KLRC-525 550 / 935 50 / 37KLRC-950 950 / 1615 100 / 75
• Ideally suited for pumping wet mixtures - even slugs of liquid • Can pull down as low as 4 Torr (5.3 mbar a)
• Low-pressure performance is limited by the vapor pressure of the aling liquid: water, oil or process liquids
• Complete engineered system solutions available: instrumentation, controls, piping & valves
• Self-contained liquid recovery & recirculation are available
• Center-anchored tie rods allow access to either end of the pump without total disasmbly
• Double mechanical als available in models KLRC75 through KLRC525 to meet API Piping Plan Requirements Liquid Ring Vacuum Pumps
KLRC Two-Stage
Available in standard, all iron construction (no yellow metals) and 316 stainless steel.Liquid ring pumps often require water-cooling, but air-cooling systems are available.
Typical Applications
• Chemical & Pharmaceutical Processing • Vapor Recovery • Deaeration • Extruders • Crystallizers
• Central Vacuum Systems
Model
CFM / m 3/h HP / kW A-5 10 / 17 1 / 0.75A-10 15 / 26 1.5 / 1.1A-15 22 / 37 2 / 1.5A-20 35 / 59 3 / 2.2A-75 75 / 128 5 / 3.7A-100 105 / 178 7.5 / 5.5A-130 140 / 238 10 / 7.5A-200 220 / 374 15 / 11A-300
300 / 510 20 / 15
• Simplistic in design, rugged in construction
• Built to run in the most vere of industrial conditions
• Unique design allows pump to operate flooded, without damage • Flat power curve over entire vacuum range prevents motor overload • No contact between operating components in the casing • Pull down to 29” Hg - 25 Torr (33 mbar a)
• Incread water handling capability prevents heat build-up, extends life of single mechanical al
• Reduced stress on motor shaft and bearings
• Compact, clo-coupled design eliminates need for interstage manifold or motor alignment
A Series Single-Stage
A Series pumps are not as susceptible to cavitation compared to flat plate design becau the flow path through the pump is an axial flow. This allows the velocity through the pump to be unchanged and carries the air out effortlessly.
It is not unusual for the pumps to run 24/7 operation for years without maintenance.A Series pumps are vibration-free and environmentally friendly with no oil ud for lubrication, and no oil discharged to atmosphere.
Complete, lf-contained systems including liquid recovery and recirculation are available.
Typical Applications • Filtration
• Solvent Distillation/Vapor Recovery • Sterilization • Autoclaves • Degasifiers • Extruders • Deaeration
• Evaporators
Model
CFM / m 3/h HP / kW
KDP-150 88 / 180 7.5 / 5.5 KDP-330 194 / 330 15 / 11KDP-400 235 / 400 20 / 15 KDP-800
459 / 780
30 / 22
• Simple, robust design can handle process by-products – liquids, condensate, and even small particles • No oil or water in contact with process
• No contact between operating components in the casing
• Full pumping speed from atmospheric pressure down to 1 Torr; ultimate pressure 0.1 Torr (.05 Torr on Model KDP-800)• Quiet operation – less than 85 dB(A)
大海陀• Short gas path through the pump for quick discharge • Extended shaft for either V-belt or direct drive Dry Screw Vacuum Pumps
KDP Screw-Type Dry Vacuum Pump
Casing and rotors are made of ductile iron, PFA coated.
Typical Applications • Solvent Recovery • Vapor Recovery • Vacuum Packaging • Freeze Drying
• Patented variable pitch rotor design increas efficiency and lowers temperatures
• No oil or water in contact with process gas
• Can handle both condensible vapors and some solids without leaving residue
• Capable of full pumping speed from atmospheric pressure to 1 Torr (1.3 mbar a)
• Can achieve ultimate vacuum as low as 0.01 Torr (0.013 mbar a)
• No metal-to-metal contact between operating parts • Quiet operation
SDV Variable Pitch, Screw-Type Dry Vacuum Pump
The SDV’s space saving C-face motor design eliminates the need for motor coupling and guard. It features a short gas path through the pump for quick discharge.
Typical Applications
• Chemical & Pharmaceutical Processing
表外业务• Solvent Recovery • Crystallization • Vapor Recovery
Model
CFM / m 3/h HP / kW KDP-150 71 / 120 7.5 / 5.5KDP-330 159 / 270 15 / 11 KDP-400 194 / 330 20 / 15KDP-800
388 / 660
30 /
22
Model CFM / m 3/h HP / kW SDV-120 71 / 120 5 / 3.7 SDV-200 106 / 180 5 / 3.7
SDV-320 188 / 320 10 / 7.5 SDV-430 253 / 430 15 / 11SDV-800
441 / 750
20 / 15
Model CFM / m 3/h HP / kW SDV-120 59 / 100 5 / 3.7SDV-200 88 / 150 5 / 3.7SDV-320 157 / 267 10 / 7.5SDV-430 211 / 358 15 / 11SDV-800
368 / 625
20 / 15
60 Hz, Direct Drive
50 Hz, Direct Drive
60 Hz, Direct Drive
50 Hz, Direct Drive
• Pump high volumes at very low pressure
• High-capacity dry rotary lobe vacuum booster is matched to a smaller rotary piston vacuum pump
• For continuous operation below 1 Torr (1.3 mbar a), the vacuum booster can increa pumping speed by a factor of 10 or more
混凝土缺陷• For operation at higher pressure and for faster evacuations, the booster may be approximately twice the capacity of the piston pump
• Performance ranges 200-12,000 CFM (340-20,388 m 3/h) with ultimate vacuum levels as low as 0.2 microns
• Conventional systems with direct driven or V-belt driven boosters • Low-profile systems with clo-coupled boosters are available • Creates a higher capacity system with economy of scale Engineered Solutions
Booster/Rotary Piston Vacuum Pumping Systems
智能巡检系统
Tuthill application engineers can help you make the best lection for your specific needs.
• Ideal for pumping wet gas mixtures at low pressures飞奔
• Oil-filled systems avoid problems with corrosive contaminants and alant liquid vapor pressures at higher temperatures • Process liquid-filled systems prevent contamination of process gas with either water or oil
Booster/Liquid Ring Vacuum Pumping Systems
A variety of two and three-stage systems are available, complete with instrumentation, condenrs, partial or complete alant liquid recovery and recirculation, piping, and valves.
Booster/Dry Screw Vacuum Pumping Systems
剖析材料
• Combine high pumping speed with deep vacuum levels and operate free of oil, water or other aling liquids
• Flows range to 4,500 CFM (7646 m 3/h) with vacuum levels to 10 microns and below
Complete engineered solutions are available and may include any combination of dry screw vacuum pumps, vacuum boosters, electric motors, direct of V-belt drive, coolant recirculation systems, instrumentation, controls, skid piping and valves.
Typical Applications • Transformer Oil Drying • Vacuum Furnaces • Vapor Coating
• Vacuum Packaging
Typical Applications • Vapor Recovery
苏俄• Chemical Processing • Dryers & Evaporators
Typical Applications
• Chemical & Pharmaceutical Processing • Semiconductor Processing • Solvent Recovery • Crystallization • Dry Etching • Vapor Recovery
Custom Engineered Solutions
Tuthill application engineers are ready to help you lect the best system and combinations of components for your specific needs. Custom engineered system solutions to 12,000 CFM are available with a combination of vacuum boosters/air ejectors
and roughing pumps for any vacuum application. Contact your Tuthill rep or call 800-825-6937 for assistance.
