The information is provided as a rvice to our customers and is intended only for their u. The MSDS format adheres to standards and regulatory requirements according Annex II of EU Regulation (EC) No 1907/2006 (REACH) and its amendment by the COMMISSION REGULATION (EU) No 453/2010 from May 2010. It may not meet regulatory requirements in other locations.
I. IDENTIFICATION OF THE SUBSTANCE / PREPARATION AND THE COMPANY
• Grade Name: MXB-2900
• Product Category: White Masterbatch
• Chemical Formula: LLDPE, TiO2 (The product is a mixture under the definition of REACH/CLP) • Field of Application: Color Concentrates for plastic applications
• Producer: ML Industries Co., Ltd.
No.1 Industrial Zone, Jiuqu, Daojiao, Dongguan City, P.R. China
• Emergency Phone No.: +86-769-88324778
II. COMPOSITION AND INGREDIENTS
III. HAZARDS IDENTIFICATION
• Indication of Danger: The product is not classified hazardous according to the Regulation (EC) No 1272/2008 and the Council Directives 67/548/EEC and 99/45/EEC.
• Most Important Hazards: none
IV. FIRST AID MEASURES
• Inhalation: No specific treatment is necessary since this material is not likely to be hazardous by inhalation. If dust or fumes reach excessive levels, they should be removed by fresh air. Get medical attention if cough or other symptoms develop.
• Skin Contact: For hot product, immediately immer in, or flush the affected area with large amounts of cold water. Cover with clean cotton sheeting or gauze and get prompt medical attention.
Do not remove material from skin as the damaged flesh can be easily torn. Flush with large amounts of cool water. If irritation persists, contact a doctor.
• Eye Contact: Flush eyes with plenty of water. If irritation persists, consult a doctor.
音符简笔画
• Ingestion: Not likely to be ingested in prent form.
V. FIRE-FIGHTING MEASURES
• Suitable Extinguishing Media: U dry chemical, foam., carbon dioxide or water spray
• Extinguishing media, which must not be ud for safety reasons: No information available
• Special protective equipment for firefighters: In the ca of irrespirable dust and/or fumes, u lf-contained breathing apparatus and dust impervious protective suit.
VI. ACCIDENTAL RELEASE MEASURES
• Personal Precautions: No information available
• Environmental Precautions: Do not contaminate water
• Methods for cleaning up: Sweep up and shovel into suitable containers for disposal
VII. HANDLING AND STORAGE:
• Handling: U with adequate ventilation. Minimize generation of dust.
• Storage: Store at normal temperature and keep dry.
VIII. EXPOSURE CONTROLS/PERSONAL PROTECTION
• Engineering measures to reduce exposure: If process generates dust, fumes or mist, u ventilation to keep exposure to airborne below the exposure limit
• Exposure limit(s): not determined
• Occupational exposure controls: not determined
• Personal Protective Equipment: not determined
• Respiratory Protection: If dust, smoke or fumes are generated during processing or handling, wear appropriate approved respiratory protection to keep concentration below the permissible exposure li
mit. • Hand protection: Wear suitable gloves to protect against specific hazard
• Eye protection: Wear eye/face protection appropriate for the specific hazard
• Skin and body protection: Wear suitable gloves to protect against specific hazard.
• Work/Hygiene Practices: Do not breathe fumes/mist Avoid contact with skin.
• Environmental exposure controls: Do not flush into surface water or sanitary wer system
IX. PHYSICAL AND CHEMICAL PROPERTIES
General information
• Physical state: solid
• Odor: no odor
• Color: white
• Specific gravity: 23°C 1.90g/cm3
Important Health Safety and Environmental information
• PH: Not applicable
• Boiling point/range: Not applicable
• Flammability (solid, gas): No information available
• Explosive properties: No information available
• Oxidizing properties: No information available
冰片的功效与作用
• Vapor pressure: No information available
• Solubility: Insoluble
• Partition coefficient (n-octanol/water): Not applicable
• Viscosity: Not applicable外国名著有哪些
• Vapor density: No information available
• Evaporation rate: No information available
X. STABILITY AND REACTIVITY
• Stability: Stable under recommended storage conditions
阶段性成果• Conditions to avoid: Do not store near heat, flame or strong oxidants. Minimize dust generation and accumulation
• Materials to avoid: No information available
单人床垫• Hazardous decomposition products: Oxides of carbon
• Polymerization: Unknown
XI. TOXICOLOGICAL INFORMATION
Local effects
• Skin irritation: No data available
• Eye irritation: No data available
• Inhalation: Health injuries are not know or expected under normal u
• Ingestion: Health injuries are not know or expected under normal u
• Sensitization: No information available
• Acute toxicity: No information available
• Chronic toxicity: No information available
Specific effects
• Carcinogenic effects:Chronic exposure to dust can cau lung dias including cancer. When encapsulated in a plastic matrix, risk of exposure is decread. Protect workers from dust exposures during handling or grinding operation.
• Mutagenic effects: Not considered to be mutagenic
• Reproductive toxicity: Not believe to be a reproductive hazard
• Target organ effects: Skin Eyes Respiratory tract
XII. ECOLOGICAL INFORMATION
• Ecological effects: N/A
• Product information: N/A
• Aquatic toxicity: N/A
• Other information: N/A
• Additional ecological information: N/A
XIII. DISPOSAL CONSIDERATIONS
• Waste form residues / unud products: Dispo in accordance with local regulations
• Further information:Waste codes should be assigned by bad on the application for which the product was ud
XIV. TRANSPORT INFORMATION
• UN/ld No: No information available
热干面• ADR/RID: Not regulated for transport
爱依旧在• IMDG /IMO: Not regulated for transport
• ICAO/IATA: Not regulated for transport
XV. REGULATORY INFORMATION
害羞的英语
• In accordance with local and national regulations
• Indication of danger: Not dangerous goods
XVI. OTHER INFORMATION
•Changes against last version: Adaption to directive 453/2010/EC
• This information is bad upon technical information believed to be reliable.
