Complete the supplier information portion of the form. All fields marked with an asterisk (*) and
in a red box are considered required fields for the form to operate.
PAGE 1
You may click on “Highlight Required Fields” in the top header of Adobe so that you ensure that required fields are completed.
1.Before beginning, check that the Declaration Class is “Class 6‐ RoHS Yes/No, Homogeneous
Materials and Mfg Information.”乡气
2.Ericsson has completed the Requester Information ction and part of the Supplier
Information ction, which are contained in the XML request.
Note: If the information is incorrect and locked (3 fields of Part Information cannot be edited by the supplier. ), plea notify the Ericsson requester and do not change it.
补孕酮的食物
3.Some other fields under Supplier Information ction in a blue box shall be filled in by
supplier:
i.Respon Date : From the date that the declaration is valid.
开机自启动设置ii.Authorized Reprentative : Person responsible for the integrity of the information
iii.Title – Reprentative : Title of the Authorized Reprentative
iv.Phone – Reprentative : Authorized Reprentative’s phone number(s)
v.Email – Reprentative : Authorized Reprentative’s email address(es)
vi.Supplier Comments or URL for Additional Information: This field is ud if the supplier has any specific comments about the part in question, e.g. if the part will be replaced
soon or a URL where more information about the part can be found etc.
Note: If the contact and the Authorizer is the same person, it is not allowed to type
‘same’ in the fields. Instead, click on the Duplicate Contact Authorized
国际贸易理论
Reprentative button to duplicate the fields.
vii.Effective Date: The date on which this version of the part was made available
viii.Version: If the part is in the original version the word “Original” is put in this field
ix.Manufacturing Site: The D&B number of the site/sites where the part is manufactured can be written here
x.Weight: Item weight must be supplied in milligrams, grams or kilograms
xi.UOM: Unit of Measure, the drop down menu must be ud. Make sure that the total weight on page 3 is consistent with declared weight on page 1
xii.Unit type: The drop down menu must be ud
xiii.Alternate Recommendation: A suggested alternate part number or part name can be provided here
xiv.Alternate Item Comments: Comments about the alternative recommendation
i.Terminal Plating / Grid Array Material: Pull‐down menu with 68 choices for the
plating on the terminals or material ud as a termination for the electronic item(s).
ii.Terminal Ba Alloy: Pull‐down menu with 8 choices. If there is no ba material ud by the component(s), such as tho that only have plating for the termination,
lect “N/A”
iii.J‐STD‐020 MSL Rating: Many of the plastic encapsulate are hygroscopic, The IPC/JEDEC joint standard describes the methods ud to understand the moisture
absorption susceptibility of the package design. U the pull‐down menu to lect
the appropriate condition for the component(s) described on the form. There are 2
additional reporting conditions that may be ud in addition: “Not Applicable”, ud
to describe items that are not moisture nsitive, and “Do not meet”, which must
理想的句子
be supplemented with the reason that this condition was chon and the reason is
that it exceeds the requirements or it is less than the minimum of 24 hours.
iv.Peak Process Body Temperature: The peak temperature that the component can tolerate
v.Max Time and Peak Temperature: The maximum time the temperature of that component can tolerate
vi.Number of Reflow Cycles: U the pull‐down menu to lect the maximum number of cycles that the component or item can withstand (at the temperature and time
indicated in the previous 3 fields)
PAGE 2
In the RoHS Material Composition Declaration Section, the following are required:
i.The Declaration Type: contains the legal language required by Ericsson already
appears in this ction
ii.Select “Accepted” in the Supplier acceptance box indicating your acceptance of that statement
iii.Go to the RoHS Declaration field and u the pull‐down menu to make your lection regarding your material’s condition. Depending on the item lected, the
form will make adjustments to the required fields to follow. Your options include:
· Item(s) does not contain RoHS restricted substances per the definition above
· Item(s) contains RoHS restricted substances above the limits per the definition and is not under exemption
· Item(s) does not contain RoHS restricted substances per the definition above except for lead in solders and lected exemptions, if any
· Item(s) does not contain RoHS restricted substances per the definition above except for lected exemptions
· Item(s) is obsolete, no information is available
· Item(s) is unknown, no information is available
iv.In the RoHS exemption ction, the following is required:
If RoHS materials are prented under an exemption, they must be lected from the
pull‐down menu Exemption List Version. The exemptions must also be claimed
next to the substances on page 3
v.The signing of the form must be done as the last step before returning to Ericsson, after all the substances on page 3 are filled in.
To create a lf‐signed digital ID, plea choo “Advanced Security Settings ”
PAGE 3
In the Homogeneous Material Composition Declaration for Electronic Products ction:
Ericsson normally requires a full material declaration, meaning that constituents of any concentrations must be declared. Exempted are natural impurities meaning an undesired prence in very small concentrations which can be declared as a natural impurity. Ericsson is aware of the fa
ct that some materials can be problematic to declare due to company cret. Plea complete the form as follows:
i.Item/Subitem Name: the item for which a material declaration is requested on page 1
except when that item consists of veral sub‐items. In that ca the different sub‐items shall be na
med here. For instance transmitter, MUX, modulator, ect.
马鼻疽
ii.Homogeneous Material: the specific homogeneous material on the electrode, resin, bonding wire, ect.
NOTE: surface treatments and chemical coating are considered as homogeneous materials and must be declared.
上什么下什么成语iii.Weight: the weight of the homogeneous material. Note this should be the sum of individual substance weights within the homogeneous material. The sum of substance weights is not allowed to exceed the homogeneous material weight even by a small amount. Small differences due to scale inaccuracy are accepted but only between page 1 and 3
iv.Level: in the Level column the supplier should choo “Requester”, ”JIG A” or ”JIG B”
unless the substance to be reported does not exist in the pre‐defined lists, in which ca “Supplier” should be chon and the supplier must fill in the Substance category, Substance and CAS number.
NOTE: All substances must be declared!
If an incorrect CAS number or no CAS is given, the declaration will BE
DISQUALIFIED
v.Substance Category: to be chon from the pull‐down menu if Level is “JIG A”, “JIG B” or filled in if Level is”Supplier”小米手机查真伪
vi.Substance: If one of the prefabricated lists was chon, choo the substances from the pull‐down menu. If a substance needs to be Supplier defined, enter the substance here.
(if Level is”Supplier”)
vii.CSA: if a CAS number exists the supplier must fill in it if the “Supplier ” Level is chon. It
is extremely important that the correct CAS# is given
viii.Exempt: if a substance is exempted in accordance to RoHS it should be stated with the appropriate exemption number in the column Exempt.
ix.Weight: is the weight of the substance in the homogeneous material, must be declared together with the correct Unit of Measurement(UOM)
x.Unit of Measurement: stated in g or mg
xi.PPM: if applicable enter a value
