Product Bulletin 2008
Relea A, Effective March 2002
Scotchcal ™
Graphic Film Series 2008
Description
Advantages • Screen printable • High Gloss •
Exterior, long term durability
• Dimensionally stable • Permanent
Applications and Us
Film ries 2008 is intended only for u with the listed Compatible Products and the following applications. Any other application is NOT warranted by 3M or covered by the worldwide 3M™ MCS™ Warranty unless 3M gives its prior written approval for the application. • Shipping containers • Exterior graphics and signs • Interior graphics and signs
• Information labels
•
Commercial vehicle and fleet graphics and emblems
Limitations of Us
The following us and applications are specifically NOT warranted. • Application to vere corrugated surfaces
•
Graphics made for automotive Original Equipment Manufacturers (OEM); contact 3M Automotive
Division at 1-800-328-1684, Ext. 444, for alternatives.
Compatible Products
• 3M™ Scotchcal™ Screen Printing Ink Series 1900 • 3M™ Scotchcal™ Screen Printing Ink Series 9700UV • 3M™ Scotchcal™ Four Color Screen Printing Ink Series 9700UV
中国空军进行曲•
Selected 3M application tapes
Characteristics
Characteristic Description
Colors 2008-10 White 2008-12 Black Film
4 mils (0.10 mm) vinyl Thickness with
adhesive 5 to 6 mils (0.12 to 0.15 mm)
Adhesive Pressure nsitive
Adhesive color Clear
乱蟠桃大圣偷丹
Liner 98.5 pound, polyethylene-coated
paper
Application surfaces Flat, with and without rivets, minor surface welds and ribbing Recommended substrates Glass, metal, paint, fiberglass reinforced plastic, rigid plastic Application temperature range
3°C to 38°C (37°F to 100°F) (air and substrate)
Removability Permanent
Note: For the full product names of the 3M products listed on this page, plea e page 1.
Effective Performance Life
The effective performance life is bad on field experience and exposure tests conducted globally by 3M. When the graphics are procesd and ud according to the 3M recommendations, they should have the performance life shown in the table below. The actual performance depends on the: •U of compatible products
•Ink formulation and drying methods
•Proper lection and preparation of the substrate • Application
methods
学习歌曲•Angle and direction of exposure
• Environmental
conditions
• Cleaning
methods
Warranted Durability Container Graphics
Ink Series Clear Coat Film 2008-10
worldwide Film 2008-12 worldwide
Unprinted None 7 7
1900 1920 air dried
1920 oven dried 5
6
NR
NR
9700UV, line color 9720UV 7 NR 9700UV metallic 9720UV 7 NR 9700UV, four color 9720UV 7 NR
Vehicle or Sign Graphics
Film 2008-10 Film 2008-12 Ink Series Clear Coat
U.S.1 U.S. Dert
Southwest 2 U.S.1 U.S.
Dert
Southwest 2
unprinted unprinted 5 3 5 3
1900 1920 air dried
1920 oven dried 5
5
3
3
NR NR
9700UV, line color 9720UV 5 3 NR NR
9700UV metallic 9720UV 5 3 NR NR
9700UV, four color 9720UV 5 3 NR NR
NR = Not Recommended
1For warranty periods outside the United States, contact the 3M sales organization for that country.
2The U.S. Dert Southwest includes Arizona, New Mexico, and the dert areas of California, Nevada, Utah, and Texas.
A detailed map is available by request.
Screen Printing
To get the durability given in the Effective Performance Life ction, u the correct combination of ink and overprint clear. Carefully follow the processing directions. Check the appropriate Product Bulletins and Instruction Bulletins for the limitations of each particular ink. Refer to the 3M Related Literature ction on page 4.
Compatible Inks
Refer to Compatible Products on page 1. Exceptions
•Unprinted film 2008-10 may chalk in some vere exterior applications. If possible chalking is critical,
the film must be overprinted with overprint clear
1920DR or 9720 UV. The expected durability is the
same as for the ink being applied to the film. •Graphics expod to abrasive washing conditions, harsh cleaners or chemicals required an overprint clear.工作汇报结尾
2 - Product Bulletin 2008
Note: For the full product names of the 3M products listed
on this page, plea e page 1.
出水痘的症状Cutting
The following are common cutting methods for this film. See Instruction Bulletin 4.1 for details. • Bandsawing •
Hot kiss cutting
• Drum-type electronic cutting •
Flat-bed electronic cutting
• Guillotine • Hand cut
•
Cold and hot steel-rule
die cutting
Premasking and Prespacing
The type of application tape to u depends on the type of graphic produced and the ink or clear coat that was applied last. See Instruction Bulletin 4.3 for details. • U a prespacing application tape if the graphic has large amounts of the liner expod.赵繁体
•
U a premasking application tape if very little of the liner is expod.
Clear Coat
Prespacing Tape Premasking Tape
Unprinted SCPS-2 SCPM-3
1920DR SCPS-2 SCPM-3 9720 UV 9700 UV (no overprint clear)
SCPS-53X SCPM-44X洛波
Application
Refer to the 3M Related Literature ction for a list of available application bulletins. The following are application details specific to film ries 2008.
Temperature
The air and substrate application temperature range for this film is 3° to 38°C (37° to 100°F) for flat and riveted surfaces.
Positioning
This film has a pressure-nsitive adhesive. On vehicles and shipping containers, do not u detergent and water or a commercial application liquid to position the graphic. Finishing
If an application requires edge aling, u edge aler 3950.
Removability
Film ries 2008 is not a removable film. Removal requires a solvent-bad, heat or mechanical remover system.
Shelf Life, Shipping, and Storage
•
Unprocesd film has a shelf life of two years after receipt. Procesd film has a shelf life of one year. However, the total shelf life of a graphic before and after processing cannot exceed two years. •
Store the film in a clean, dry area in the original container.
• Store the film out of the direct sunlight and at less than 38°C (100°F).
• Ship the finished graphic lying flat or in a roll. To roll the graphic, roll it film side out onto a core that is 5 inches (127 mm) or larger in diameter. The methods help prevent the film and premask from wrinkling or popping off the liner.
Health and Safety
Product Data
Values given are typical for film ries 2008 and are not for u in specifications. For a custom specification, submit a request to your 3M sales reprentative. The data given below is for unprinted film. Physical Characteristics
Property English Units Metric Units
Tensile strength (minimum) 2000 lbs. Sq. In. 15 N/mm 2 at 23°C Applied shrinkage < 0.019 inch
< 0.5 mm
Service temperature range -12° to +176°F -30° to +80°C
Chemical Resistance Characteristics
• Resists mild alkalis, mild acids and salt. •
Excellent resistance to water.
Product Bulletin 2008 - 3
Adhesion Characteristics
Substrate English Units pounds/inch Metric Units
N/25mm
ABS
3.6 16
Acrylic enamel 3.6 16 E&D A1 3.6 16
Chrome
4.0 18
Fruehauf prepainted
panels
3.6 16
Warranty and Limited Remedy
The following is made in lieu of all other express or implied warranties, including any implied warranty of
merchantability or fitness for a particular purpo: Film ries 2008 is warranted to be free of defects in materials and manufacture at the time of shipment and to meet the specifications stated in this Product Bulletin. 3M will replace or refund the price of any 3M materials that do not meet this warranty within the specified time periods. See the worldwide 3M™ MCS™ Warranty Bulletin, which gives the terms and limitations of the warranty.
The remedies are exclusive. In no ca shall 3M be liable for any direct, indirect, or conquential damages, including any labor or non-3M materials charges.
Related 3M Literature
Listed below is related 3M technical literature that may be of interest. You may view and print the Bulletins from our Web site at , or order them via
our Fax-on-Demand (FOD) system. Call one of the
phone numbers to order the desired bulletins, and specify
the FOD document number provided in the chart.
United States or Canada: 1-800-364-0768
International: 1-651-732-6506
Subject Bulletin No. FOD
No.
Product Bulletins
3M™ Screen Printing Ink Series 1900 1900
2501
3M™ Screen Printing Ink Series
9700UV
9700 2507
Instruction Bulletins
Screen printing with ink ries 9700 UV - line color - 4-color 3.4 3.13 60046013 Screen printing with ink ries 1900 - line color - 4-color
3.11 3.12
60116012
Using 3M application tapes; premasking and prespacing for films 4.3 6503 Application, substrate lection, preparation and substrate-specific application techniques
5.1 7001
Application, general procedures for interior and exterior dry applications
5.5 7005
Storage, handling, maintenance, removal 6.5
8505
枪械
Commercial Graphics Division 3M Customer Innovation Center6F Building 17 300 Tianlin Rd.
Shanghai, P. R. China 86 21 62753535 ext.2423
E3M 2002. All rights rerved.
4 - Product Bulletin 2008
