Step 2:Connect one end of the yellow
and the other end to the Internet port on your ROUTER.
Step 3:
Plug in, then turn on your MODEM.Wait approximately 2 minutes
until your modem turns on.N600 Wireless Router Package Contents:
N600 Wireless Dual Band Router
WNDR3400v2Installation Guide
Power adapter
Ethernet cable家长会开场白
“Troubleshooting” ction on the back of this installation guide.
(with stand attached)
Power On/Off button is in the ON position (pushed in).
Attach the STAND to the ROUTER:
1. Position the router so that the Power button is at the bottom and the USB port is at the top.
2. Snap each piece of the stand onto a bottom corner of the router.
Step 1:
Unplug the power
to turn off your MODEM.
tvb古装Optionally, connect wirelessly by using the pret wireless curity ttings located on the bottom label.
Router stand (two pieces)
© 2011 by NETGEAR, Inc. All rights rerved. NETGEAR and the NETGEAR logo are registered trademarks of NETGEAR, Inc. in the United States and/or other countries. Other brand and product names are trademarks or
registered trademarks of their respective holders. Information is subject to change without notice.
June 2011
Find the pret Wireless Settings on your router and record them here:
Wi-Fi Network Name (SSID) _______________________________ Network Key (Password ) ________________________________If you change the pret wireless ttings, record it here:
慈祥的拼音Connect Wireless Devices to Your Router
Choo either the manual or Wi-Fi Protected Setup (WPS) method to add wireless computers, and other devices to your wireless network.
Manual Method乾坤刀
1. Open the software utility that manages your wireless connections on the
wireless device that you want to connect to your router (iPhone, laptop,
computer, gaming device). This utility scans for all wireless networks in your area.
2. Look for the pret NETGEAR wireless network name (SSID), and lect it.
The pret Wi-Fi network name (SSID) is located on the product label on the bottom of the router.
Note: If you changed the name of your network during the tup process, look for that network name.
高英语
3. Enter the pret password (or your custom password if you changed it), and
click Connect .
4. Repeat steps 1–3 to add other wireless devices.
WPS Method
If your wireless device supports WPS (Wi-Fi Protected Setup)—NETGEAR calls this method Push 'N' Connect—you might be prompted to press the WPS button on the router instead of entering a password. If this happens:1. Press the WPS button
耳廓有痣
on the router.
2. Within 2 minutes, press the WPS button on the client device, or follow the
WPS instructions that came with your wireless device to complete the WPS process. The device will then be connected to your router. 3. Repeat this process to add other WPS wireless devices.
Note: WPS does not support WEP curity. If you try to connect a WEP client to your network using 火字五行属什么
WPS, it will not work.
Troubleshooting
The browr cannot display the Web page.
• Make sure that the PC is connected to one of the four LAN Ethernet ports, or
玉扇多肉wirelessly to the router.
• Make sure that the router is fully up and running. Its wireless LED should turn
on.
• Clo and re-open the browr to make sure that the browr does not cache
the previous page.
• Brow to routerlogin .
• If the PC is t to a static or fixed IP address (this is uncommon), change it to
obtain an IP address automatically from the router.
Other Features
For complete DoC plea visit the NETGEAR EU Declarations of Conformity website at: /app/answers/detail/a_id/11621.For GNU General Public Licen (GPL) related information, plea /kb_web_files/open_src.asp .
For additional features, including Live Parental Controls, Traffic Metering, ReadyShare, Guest Access, and others, plea log into your router at routerlogin .
Download the free NETGEAR Genie Automatically fix common network problems and easily manage your home network /genie
