Mandatory Inflatable Packaging Specification
All products requiring corrugated packaging cartons must follow the guidelines unless stated otherwi. The are MINIUMUM requirements.
SECTION 1 – Die Lines
Die lines should be designed to fit the product with as little extra space as possible; however, the cartons must not bulge.
童装在哪里进货
Example of too much extra space. Extra space in the top and ends should be ONLY 窗帘广告语as much as to prevent bulging.
SECTION 2 – Box Specification
Products Weighing 0 lbs. to 5 lbs.
300gsm CCNB Laminate (or equivalent)
Single Wall Corrugate Board: E Flute
Kraft Backing/Lining: B Grade (or equivalent)
2 Coats Clear Varnish
Mullen: 200 lbs./sq. inch
ECT: 32 lbs./inch
Products Weighing Over 5 lbs. to 15 lbs.
300gsm CCNB Laminate (or equivalent)
Double Wall Corrugate Board: B Flute + E Flute
Kraft Backing/Lining: B Grade (or equivalent)
2 Coats Clear Varnish
Mullen: 200 lbs./sq. inch
ECT: 32 lbs./inch
Products Weighing Over 15 lbs. to 25 lbs.
350gsm CCNB Laminate (or equivalent)
Double Wall Corrugate Board: B Flute + E Flute
Kraft Backing/Lining: K Grade – 225gsm to 250gsm (or equivalent)
2 Coats Clear Varnish
Mullen: 200 lbs./sq. inch
萝莉头像
ECT: 32 lbs./inch
Products Weighing Over 25 lbs. to 45 lbs.
350gsm CCNB Laminate (or equivalent)
Double Wall Corrugate Board: B Flute + B Flute
Kraft Backing/Lining: K Grade – 225gsm to 250gsm (or equivalent)
2 Coats Clear Varnish
Mullen: 275 lbs./sq. inch
ECT: 44 lbs./inch
Products Weighing Over 45 lbs.
Special requirements to be addresd as needed
SECTION 3 – Flute Direction & Glue
Flute Direction
The corrugate flute should run perpendicular with how the box sits on the shelf.
Flute direction when sitting on the shelf.
Glue Pattern & Specification
3 Rows of Hot Melt Glue 0.5” from FRONT EDGE and spaced 0.5” apart
牙齿旅行记1 Row of Hot Melt Glue 0.5” from EACH SIDE
高考素描
Hot Melt Glue must be a minimum of a 3MM bead
Curing pressure must immediately be applied by turning the product onto the side being glued or by stacking another product onto the glued side.
走山
Unacceptable Glue Application
The pattern is not acceptable and when opened it should look like the photo on the left.
党锢Acceptable Glue Application
The corrugate should parate when opened.
SECTION 4 – Master Carton Specification
Master Cartons Weighing 0 lbs. to 25 lbs.
Double Wall Corrugate Carton: A Flute + B Flute
Kraft Carton
Mullen: 275 lbs./sq. inch
ECT: 44 lbs./inch
Master Cartons Weighing Over 25 lbs. to 40 lbs.
Double Wall Corrugate Carton: B Flute + B Flute
Kraft Carton
Mullen: 275 lbs./sq. inch
ECT: 44 lbs./inch
SECTION 5 – Glossary of Terms
gsm - grams per square meter
CCNB – Clay Coated News Back (white board with gray backing, ud as top sheet for litho printing)
ECT – Edge Crush Test
恍如隔世