一、调节阀系列First、ries regulating valve
1、型号编制说明The model description：
CYT
P普通型 M密闭型
P Normal type M Airtight type
D电动 Q气动 S手动
D Motor-driven Q Pneumatic S Manual
风阀高度H Air valve height H
风阀宽度W Air valve widthW
1 工作温度为－40℃~95着凉了怎么办℃ 2工作温度为－55℃~205℃
1 the operating temperature -40℃~95℃ 2 the operating temperature55℃~205℃
D对开式 P平行式
D Vis-a-vis type P Parallel type
创元风量调节阀
chuangyuan air volume regulating valve
1.1、型号示例 model sample1：
CYTD2－1000×500SP 表示创元普通型对开式多叶调节阀，工作温度为－55℃~205℃，宽1000mm，高500mm
CYTD2－1000×500SP is Chuangyuan normal vis-a-vis multi-blade regulating valve, the
working temperature is -55℃~ 205℃, width is 1000mm, the height is 500mm
2、风量调节阀技术参数 Air volume regulating valve technical parameters：
2.1、风量调节阀框体和叶片采用镀锌钢板制成，无焊点，表面无需涂装；
Air volume regulating valve frame and blade made by galvanized steel plates, no weld, the surface doesn’t need paint.
2.2、风阀轴承材料为烧结青铜含油轴承，可以耐300℃的高温；
The regulating valve bearing material is sintered bronze oiled bearings, can resist high temperature 300℃;
2.3、叶片由10×10方形轴连接，轴的材料为45#镀锌钢；
Blades are connected by 10×10 square shaft, the material of the bearing is 45# galvanized steel plates
2.4、根据需要可选配可调节风量的执行机构；
We can provide implement facility which can regulating the air volume by need.
2.5、普通型阀体厚度标准尺寸L=210mm，密闭型阀体厚度标准尺寸L=180mm，也可根据客户需要生产各种特型尺寸；
The standard thickness of the normal valve dimension is L=210, the standard thickness of the airtight valve dimension is L=180, customers may also choo a variety of special type size;
2.6、风量调节阀的法兰宽度为30mm、40mm，客户可以根据需要选择；
The width of the air regulating valve flange is 30mm、40mm,the ur can make choice.
2.7、密闭阀密封材料为橡胶。
The al material of the airtight valve is rubber.
3、风量调节阀分类以及特点 The air volume regulating valve classification and characteristics：
3.1、分为普通型风量调节阀、密闭型风量调节阀。每种又有对开与平行式两种类型以及手动、气动、电动三种驱动方式；
The air control valve is divided into normal air volume regulating valve、airtight air volume regulating valve. Each of them has two types, Off-style and parallel style, and they have three driven ways: manual, pneumatic, electric, manual;
对开式与平行式选用的一般原则General lection principles of off-style and parallel:
(a)当阀门所需调节的管段阻力大，而阀门消耗的阻力小时宜选用对开式，反之则应选用平行式；
When tube resistance is big but the valve consumes small resistance, it is better to choo off-type on the contrary should choo parallel;
(b)对开式的起始调节性能优于平行式；
The off-type regulation is better than parallel style;
(c)一般做开关用的风阀宜选用平行式；
If the valve ud as switch the parallel should be chon;
(d)当安装在两个系统的混合处时，宜选用相同特性的调节阀，且宜为对开式；
When the valve installed in the mixture place of the two systems, it is better to choo the same characteristics valve, and off-type is better;
(e) 对气流噪声有严格要求的系统宜选配平行式；
There are strict requirements on the aerodynamic noi matching system, parallel way should be lected;
（客户可根据需要选择相应的方式。）
(Customers can lect the appropriate way.)
3.2、风量调节阀的特点懒人布丁air volume regulating valve features：
(a)风量调节阀的传动方式为连杆传动；
Drive transmission mode of the air volume regulating valve is the connecting rods way;
(b)普通型调节阀的漏风率不大与2%，密闭型调节阀的漏风率不大与0.5%；默读第几章在一起
The leakage rate of the normal air volume regulating valve is no less than 2%, the leakage rate of the airtight air volume regulating valve is no less than 0.5%;
(c)手动和电（气）动阀门一般为顺时针方向关闭，逆时针方向开启；
Manual and electric (pneumatic) valve is generally clockwi, counterclockwi open;
3.3、风量调节阀的结构尺寸The air volume regulating valve overall dimension
3.3.1、普通型风量调节阀Normal air volume regulating valve
结构尺寸the structure dimension：
H | W |
200 | 250 | 320 | 400 | 500 | 630 | 800 | 1000 | 1250 | 1600 | 1800 | 2000 |
200 | √ | √ | √ | √ | √ | | | | | | | |
250 | | √ | √ | √ | √ | √ | | | | | | |
320 | | | √ | √ | √ | √ | √ | | | | | |
400 | | | | √ | √ | √ | √ | √洋垃圾进口 | | | | |
500 | | | | | √ | √ | √ | √ | √ | | | |
630 | | | | | | √ | √ | √ | √ | √ | √ | |
800 | | | | | | | √ | √ | √ | √ | √ | √ |
1000 | | | | | | | | √ | √ | √ | √ | √ |
1250 | | | | | | | | | √ | √ | √ | √ |
| | | | | | | | | | | | |
备注：（Note）
（1）以上“√”尺寸为常用尺寸，也可根据客户需要生产各种特型尺寸。（当W尺寸≥1250时，加中间框，叶片分隔。）
Note: The above "√" size is commonly ud, but we can also produce various special sizes. (When W size ≥ 1250, add the middle frame, blades parated.)
（2）L尺寸为210mm。
The dimension L is 210mm。
3.3.2、密闭型风量调节阀Airtight air volume regulating valve
结构尺寸the structure dimension：
H | W |
200 | 250 | 史努比的图片320 | 400 | 500 | 630 | 800 | 1000 | 书法作品图片硬笔 1250 | 1600 | 1800 | 2000 |
200 | √ | √ | √ | √ | √ | | | | | | | |
250 | | √ | √ | √ | √ | √ | | | | | | |
养发320 | | | √ | √ | √ | √ | √ | | | | | |
400 | | | | √ | √ | √ | √ | √ | | | | |
500 | | | | | √ | √ | √ | √ | √ | | | |
630 | | | | | | √ | √ | √ | √ | √ | √ | |
800 | | | | | | | √ | √ | √ | √ | √ | √ |
1000 | | | | | | | | √ | √ | √ | √ | √ |
1250 | | | | | | | | | √ | √ | √ | √ |
| | | | | | | | | | | | |
备注：（Note）
（1）以上“√”尺寸为常用尺寸，也可根据客户需要生产各种特型尺寸。（当W尺寸≥1250时，加中间框，叶片分隔。）
The above "√" size is commonly ud, but we can also produce various special sizes. (When W size ≥ 1250, add the middle frame, blades parated.)
学习三维制图（2）L尺寸为180mm。
The dimension L is180mm。
二、防火、排烟阀门Fire、smoke damper
1、型号编制说明 The model description：
