01
SLOW SERIES DUAL-SUCTION PUMP
(
)
//
(
)
0.0
0.1
This operation instructions covers the basic introduc-tion and the precautions and plea read it carefully before erection and operation of the pump and the circuit connec-tion.
The dual-suction pump made in Shanghai Liancheng (Group)Co.Ltd is developed on the basis of advanced know-how and has pasd through a continuous quality control.What is the purpo to draw out this operation in-structions is to make it convenient for urs to get familiar with the pump and have a good command of its special u.
It is very important to follow the requirements on how to have the pump reliably,safely and effectively run intro-duced in this instructions so as to make sure of its relia-bility,safety and durability of running.
This instructions does not cover any local provisions and operators,including the invited erection persons,sh-ould strictly follow the provisions.
During he pump's run,the medium being transported,flow,flow rate,density,pressure,temperature and the mo-tor's speed must not be over the limited value t forth in the technical document so as to make sure of the pump's run in line with the provisions in this instructions and con-tract document.
The pump's model/specis,running data,factory/ries codes are marked on the nameplate and plea refer to th-e data in ca of a question or repeated order,especially the order for spare parts.And plea contact with the order for spare center of clients of Shanghai Liancheng(Group)Co.
Ltd,if you need any other information or in ca of a failure with the pump.
There is the basic introduction for safety in this ins-tructions and it must be followed when to asmble,run and rvice the pump.Prior to erection and run,the per-sons for erection,specially in charge of it and for opera-tion have to read this instructions.
Besides to follow the particulars for safety in the ch-apter of "Safety",the safety indications should also be dr-awn under the specific topic.
Persons may be made harmful if not following the sa-fety particulars in this manual,therefor they must be ma-rked with special marks of danger.The make is:
0.0SAFETY
0.1MARK OF SAFETY INDICATION
02
(
)
(
)
(
)
0.2
0.3
0.4
0.5
The mark of electric shock warning The word:
Ud to not following the safety p-articulars may result in failures and malfunctions with the machine.Some other indications are directly marked on the machine,as:
-The arrow expressing the run direction;-The mark expressing the run direction;
The indications must be carried out and marked on the attention attracting place.
All the persons responsible for the pump asmbly,run,check and rvice must have the relative qualifications.There should be the person in charge of and supervisory among the operators.Proper training and instructions have to be given to tho operators who have no capability to deal with any problems,which can be entrusted to do by this Co.if necessary.Besides,every person in charge of should know well the all contents in this instructions.
Dangers may be produced to personnel safety,envi-ronment and machine and penalty and compensation for loss would be caud in ca of not following the safety par-ticulars,so special attention must be paid to them.It may result in the followings if the particular are not followed:
英语话题
-Out of functions of the important machines or units;-Breakdown of the provided rvice and maintenance;-Harm to persons caud by electricity,machinery and chemical affection;
烤盘-Harm to environment caud by the harmful matters.
课外古诗词Plea do follow the safety particulars t forth in this instructions,drawn out by the country and specified for o-perators in their operation.
The safe and protective device must be mounted for any hot or cold components which may cau dangers by operators and the said device should not be removed in run-ning in order to avoid direct contacting with the movable parts(as the clutch).To avoid dangers to people and envi-ronment,the leakage of any harmful media to be transport-ed(as the explosive,toxic and hot media)and leakages(as
0.2PERSONNEL LIMIT AND TRAINING
0.3UNCONFORMITY OF THE SAFETY PARTICULARS
0.4SAFETY CONSCIOUSNESS
0.5SAFETY PARTICULARS TO OPERATORS/USERS
03
SLOW SERIES DUAL-SUCTION PUMP
1.0
0.6
0.7
初二英语语法0.8
()
the leakages at the shaft al)must be properly procesd and the related laws,rules and the local provisions should be followed.
It must be made sure that all the work of maintenance,check and erection should be done by the special persons who have been designated,certified and very familiar with this instructions and with the machine stopped,and the ru-les for stop must be followed.
Both pump and its unit must be sterilized when to tr-ansport the medium harmful to health.
Following the above work,finish the work below at once:all related safe and protective devices must be re-mounted and restarted and plea refer to the chapter or "Running"before the machine runs again.
Any parts are not allowed to be replaced until discu-ssing with this Co.and the original spare parts and acce-ssories supplied by this Co.are safe.This Co.would not be responsible for any loss caud by the u of other pats.The pump can reliably and safely run only with the specified ways of u and the limited values in the table of data must not be over under any conditions.
0.6SAFETY PARTICULARS FOR MAINTENANCE,CHECK AND ERECTION
应对考试的万能作文0.7NO ALLOWANCE TO REPLACE ANY SPARE PARTS WITH THOSE NOT MADE IN THIS Co.
0.8THE WORKING CONDITIONS OF USE WHICH ARE NOT ALLOWED
1.1
1.2
(
)
1.1SAFETY PARTICULARS怎么炖鱼最好吃
1.2TRANSPORTATION
Make a suitable preparation and process for the transporting unit.
Plea carry out them according the notes and safety particulars below.It is recommended the unit be horizontally placed dur-ing transportation under any conditions,becau in this way,whatever mode of transport is taken,it can be stably placed without any danger(such as:highway of boat transport).
To transport,the unit must be curely placed on the shipment stand and all the parts easy to be loo and re-movable should be made cure and reliable.
04
中国十大将军2.0
PRODUCT AND ACCESSORIES
1.2.1
90
1.2.1Lifting the pump unit with a lifter
The lifting hole of the motor is ud to lift it only while not to lift the unit.To lift the pump
unit,take care of the direction of the pulling force and the
angle should not be over 90,and u the lifting rope on both sides.The correct way of lifting comes as below in the drawing.
普济禅寺
2.1
(
)
SLOW
2.1TECHNICAL CHARACTERS
SLOW pump is single-stage dual-suction centrifugal split pump with the volute casing and the connection fl-ange is made per the preferential ries of the national stan-dards.It is ud for the water works,irrigation and water logging
pump station,the industrial water supply system in a power plant,air-conditioning system,dock,fire-fighting system and
many other fields.
