SEMI AUX015-1106
SEMI OCR CHARACTER OUTLINES
This Auxiliary Information was technically approved by the global Traceability Committee on July 12, 2006
and was procedurally approved by the ISC Audits & Reviews Subcommittee on August 24, 2006. Available财务erp
at www.mi October 2006; Originally published July 2006.
NOTE: The material in this Auxiliary Information is referenced by documents in the SEMI Standards
Materials and Traceability volumes. It replaces appendices in SEMI M12, SEMI M13, and SEMI T5.
1 SEMI OCR Character Set
Figure 1
罐头瓶盖打不开怎么办
SEMI OCR Character Set
2 Dot Matrix Format
2.1 The following show the SEMI-OCR font in “single-density” mode, using a dot matrix of 5 dots horizontal and 9 dots vertical.
三国赤壁古战场
成都豆花
基础教育研究
Figure 2
米戈Single Density SEMI OCR Character Outlines
2.2 The following show the SEMI-OCR font in “double-density” mode, using a dot matrix of 10 dots horizontal and 18 dots vertical.
NOTE 1: The “origin” of this matrix is denoted by the interction of the “0-0” lines. It is centered among four dots. Single-density mode places the matrix origin at the center of a single dot.
0 0
1/5 of character width
月亮文案
主辅分离
