Intel Smart Respon Technology Installation Guide This motherboard supports Intel Smart Respon Technology. You can find the UI tup instruction and the step by step instructions below.
UI tup instruction:安全生产例会记录
1.Complete initial system tup, including installing the OS to a RAID mode system, then install
all required drivers, including RST storage driver version 10.5 or later.
2.You MUST have both the HDD you intend to accelerate AND the SSD in system at this point!
藕组词3.Boot system to desktop, open RST GUI from either Start Menu or by double-clicking RST
Storage icon in Icon tray, lower right-hand corner of the screen.
4.Once open, click on the “Enable Acceleration” button on the GUI panel.
5.When pop-up menu appears, cho which SSD you wish to u as the Cache device, which
HDD you wish to Accelerate, if you want to u the full SSD as Cache device or only 20GB, and if you want to u Enhanced or Maximized Mode.
6.For all performance testing, cho “Maximized” mode.
7.After clicking OK button, SRT will enable automatically, and the RST GUI will refresh to show
the newly accelerated system configuration.
* Intel® will update the new version RST driver in the near future. For the new version RST driver, plea check our website for the latest information:
* Before you u RST function, you just need to t the UEFI option “SATA Mode” to [RAID Mode]. It is not necessary to build RAID 0 or RAID 1 in RAID ROM.
1.
Open RST GUI, either double-click on
tray icon or open through Start menu.
Click on “Enable Acceleration” button on
front panel.
2.
Select options for your personal
preferences:
20GB or Full Disk Capacity for Cache
Volume.
Select which disk/volume you want to
Accelerate.
Enhanced or Maximized Mode.
Click “OK” button.
3.
Your GUI window will now change to
look like this.
将进酒图片The “System View” area (Green) now
shows the SSD broken up as a Cache
Volume and the spare capacity volume
(Yellow) if applicable.
Also, the Accelerated disk now has an
“Accelerated” label and icon (Blue).
Reboot the system and cache tup is
师恩难忘
complete.
1.
网络经典语录
Open RST GUI and click on the早安阳光
“Accelerate” tab.
Click on the “Disable Acceleration”
button.
2.
活法稻盛和夫
A pop-up window will appear, click
电话的发明者是谁
“Yes” RST Cache is now DISABLED.
Smart Respon Technology is now DISABLED and all data is guaranteed to be written to the HDD. This could take a few conds or even a few minutes depending on how much modified data there was.
Retting SSD to “Available”: 1.
The “Accelerate” tab window will now look like this. Note that the SSD is still divided into a Cache and Spare Cap Volume.
To ret SSD to a non-Cache-disk state, Click the “Ret to Available” button (Orange). Retting SSD to “Available”.
WARNING!
Retting SSD to Available will delete all data on the Spare Capacity Volume!
The SSD is now ret to Available.
The SSD can now be ud as a normal storage device, or you can also re-enable Acceleration through the normal enable process.
