编号 | 中文名称 | 英文名称 | |
DIN 11854-1991 | 食品工业用管配件.不锈钢制软管.带螺纹的软管接头和软管锥形接头 | Food industry fittings; ho unions of stainless steel; threaded ho couplings, conical ho couplings | |
DIN 12215-1975 | 玻璃实验仪器.软管连接用玻璃管端.橄榄形和毛细管端 | Laboratory glassware; glass tube ends for ho connections, olives, capillary tube ends | |
DIN 12865-1973 | 海棠开花时间实验室仪器.橡胶管 | Laboratory apparatus; rubber tubing | |
DIN 14312-1985 | 标称压力为16、压力吸水用消防软管B型铝合金联接器 | Aluminium alloy cap fire ho coupling type B, for pressure and suction purpos; nominal pressure 16 | |
DIN 14330-1-1985 | S 28 消防软管用标称压力PN16 C型铝合金联轴器 | Aluminium alloy delivery coupling type C; nominal pressure 16, ud for fire hos S 28 | |
DIN 14330-2-1985 | S 38 消防软管用标称压力PN16 C型铝合金联轴器 | Aluminium alloy delivery coupling type C; nominal pressure 16, ud for fire hos S 32 | |
DIN 14330-3-1978 | 急救S形橡胶管C型输液联接器.第3部分:C-S 28型和C-S 32型输液联接器用连接装置 | Delivery coupling, type C, for first aid rubber hos S; bind-apparatus for delivery coupling type C-S 28 and C-S 32 | |
DIN 14332-1986 | 输送管路的C型铝合联接器.公称压力16 .用于 C42 消防软管 | Aluminium alloy delivery coupling type C; nominal pressure 16; ud for fire hos C 42 | |
DIN 14461-5-1984 | 足球的好处与干式灭火上升总管道连接的输送阀装置.PN16救火软管阀 | Delivery valve installations connected with dry rising fire mains; fire ho valve PN 16 | |
DIN 14462 Berichtigung 1-2007 | 灭火用引水管.灭火软管系统和引水管道的规划和安装.DIN 14462-2007勘误表 | Water conduit for fire extinguishing - Planning and installation of fire ho systems and water conduit for fire extinguishing, Corrigenda to DIN 14462:2007-01 | |
DIN 14463-1-2007 | 消防灭火用给水系统.遥控注水和泄水装置.第1部分:消防软管的卷取系统 | Water systems for fire extinguishing - Filling and draining devices operated by remote control - Part 1: For ho reel systems | |
DIN 14572-2002 | 排气金属软管用排气金属软管和联轴器 | Exhaust gas metal hos and couplings for exhaust gas metal hos | |
DIN 14819-1982 | 灭火剂用吸收软管.要求.检验方法、处理 | Pick up ho for extinguishing agents; requirements, test methods, treatment | |
DIN 14820-1-2000 | 消防水龙管桥架.第1部分:木制消防软管桥架 | Bridges for fire hos - Part 1: Bridges for fire hos of wood | |
DIN 14827-1-2005 | 消防设备.输水软管运输用笼筐.第1部分:B、C和D型输水软管运输用笼筐 | Fire fighting equipment - Cages for transport of delivery hos - Part 1: Cages for transport of delivery hos type B, C and D | |
DIN 14828-2004 | 绳索软管架 | Rope ho holders | |
DIN 19658-2-1994 | 灌溉系统用可卷绕聚乙烯(PE)管道和软管.第2部分:形状固定的织物芯层软管.尺寸和供货技术条件 | Polyethylene (PE) coiling pipes and hos for irrigation systems - Part 2: Hos with fabric inlay, rigid form; dimensions and technical delivery conditions | |
DIN 19658-3-1988 | 灌溉系统用可盘绕聚乙烯(PE)管和软管.带织物内层的非刚性材料软管.第3部分:尺寸和供货技术条件 | Polyethylene (PE) coiling pipes and hos for u in irrigation systems; hos of nonrigid material with woven fabric inner layer; dimensions and technical delivery conditions | |
DIN 20018-1-2003 | 织物增强软管.第1部分:最大工作压力PN 10/16 | Textile-reinforced hos - Part 1: Maximal working pressure PN 10/16 | |
DIN 20018-2-2003 | 织物增强软管.第2部分:最大工作压力PN 40 | Textile-reinforced hos - Part 2: Maximal working pressure PN 40 | |
DIN 20018-3-2003 | 织物增强软管.第3部分:最大工作压力PN 100 | Textile-reinforced hos - Part 3: Maximal working pressure PN 100 | |
DIN 20018-4-2003 | 织物增强软管.第4部分:试验 | Textile-reinforced hos - Part 4: Testing | |
DIN 20021-1997 | 液压系统.带衬里的软管.DIN EN 853至DIN EN 857的补充件 | Fluid-systems - Hos with layer - Completation for DIN EN 853 to DIN EN 857 | |
DIN 20029-1990 | 软管管接头.1:3 锥度量规 | Ho fittings; 1:3 taper gauges | |
DIN 20030-1992 | 软管连接件.带柄的直旋塞.尺寸、材料和要求 | Ho fittings; straight-way-cock with grip; dimensions, materials, requirements | |
DIN 20033-1990 | 软管连接件.带压紧螺母的锥形管嘴 | Ho fittings; tapered nozzle with clamping nut | |
DIN 20035-1990 | 软管管接头.法兰管嘴.公称压力16 | Ho fittings; flange nozzle; nominal pressure 16 | |
DIN 20036-1990 | 软管管接头.圆螺纹的管接头套管 | Ho fittings; coupling nipples with round thread form | |
DIN 20037-1990 | 软管管接头.连接套管.尺寸 | Ho fittings; connecting nipple; dimensions | |
DIN 20038-1990 | 软管管接头.接头管嘴 | Ho fittings; coupling nozzles | |
DIN 20039-1998 | 软管连接件.软管夹 | Ho fittings - Ho clamps | |
DIN 20040-1990 | 软管管接头.连接套管阀.公称压力16 | Ho fittings; nipple valves; nominal pressure 16 | |
DIN 20066-2002 | 流体动力系统.软管组件.尺寸、要求 | Fluid power systems - Ho asmblies - Dimensions, requirements | |
DIN 22100-5-1993 | 地下矿井用合成器材和材料.管、管隔离件和软管.安全要求、检验、标识 | Articles and materials from synthetic for u in underground mines; tubes, tube isolations and hos; safety requirements, testing, marking | |
DIN 24950-1-1978 | 第1部分:液压和气动软管组件术语 | Oilhydraulic and pneumatic; terms for ho asmblies | |
DIN 25624-1-2001 | 有轨机动车部件名称.互通通道.第1部分:橡胶管通道连接 | Terms for railway vehicle parts - Intercommunicating gangways - Part 1: Rubber tube gangway connection | |
DIN 2827-2006 | 化学制品用不锈钢软管 | Ho asmblies of stainless steel for chemical products | |
DIN 3017-1-1998 | 涡轮传动软管卡圈.A型 | Ho clamps with worm gear drive; shape A | |
DIN 3017-2-2002 | 软管卡箍.第2部分:带紧固凸缘的卡箍 | Ho clamps - Part 2: Clamps with fastening lugs | |
DIN 3017-3-2002 | 软管卡箍.第3部分:螺栓卡箍 | Ho clamps - Part 3: Bolt clamps | |
DIN 3017-4-1998 | 软管卡圈.第4部分:技术交货条件 | Ho clamps - Part 4: Technical delivery conditions | |
DIN 3017-5-2002 | 软管卡箍.第5部分:带紧固凸耳的宽带软管卡箍.D型和E型 | Ho clamps - Part 5: Wide strip ho clamps with fastening lugs; Types D and E | |
DIN 3021-1-1999 | 软管夹件.弹簧板夹件(FBS).第1部分:尺寸、标记、材料和类型 | Ho clamps - Spring band clamp - Part 1: Dimensions, marking, materials, types | |
DIN 3021-2-1999 | 软管夹子.弹簧带夹子.第2部分:交货技术条件 | Ho clamps - Spring band clamp - Part 2: Technical delivery conditions | |
DIN 3021-3-1999 | 软管夹子.弹簧带夹子.第3部分:系统: 弹簧带夹子-软管-插口 | Ho clamps - Spring band clamp - Part 3: System: Spring band clamp-ho-spigot | |
DIN 30664-1-1994 | 不带外罩和配筋的实验室用燃气灶软管.第1部分:安全要求和试验 | Hos for gasfired burners for laboratories, without shroud and armoring - Part 1: Safety requirements and tests | |
DIN 30693-1980 | 液化石油气用软管的防断裂安全防护装置 | Safety devices against rupture of flexible tubes for LPG | |
DIN 3238-2001 | 压缩空气匹配件.爪状匹配件,带安全螺母内部宽度42mm,具有凸或凹软管连接末端的匹配件连接环 | Couplings for compresd air - Claw coupling, 42 mm internal width, with curing nut - Coupling with male, female and ho connection ends, joint ring | |
DIN 3285-1988 | 家用供水管道的阀门.公称压力为10的螺纹连接管和联管节.软管连接管 | Valves for domestic water supply; nipples and unions nominal pressure 10; ho nipples | |
DIN 3291-1988 | 家用供水管道的阀门.公称压力为10的螺纹连接管和联管节.带螺纹的软管连接管 | Valves for domestic water supply; nipples and unions nominal pressure 10; threaded ho nipples | |
DIN 3383-1-1990 | 煤气软管组件和连接阀.安全软管组件、带有快速连接装置的安全阀 | Ho asmblies and connection valves for gas; safety ho asmblies, safety valves with quick connecting device | |
DIN 3383-2-1996 | 燃气软管及连接件.第2部分:刚性连接软管 | Ho asmblies and connection valves for gas - Part 2: Ho asmblies for rigid connection | |
DIN 3383-4-1991 | 软管组件和连接配件.煤气用安全连接配件和试验室管路用接头 | Ho asmblies and connection fittings; safety connection fittings for gas and couplings for laboratory tubing | |
DIN 3384-2007 | 燃气用不锈钢软管组件.安全要求、测试和标记 | Ho asmblies of stainless steel for gas - Safety requirements, testing, marking | |
DIN 3489-2001 | 压缩空气匹配件.爪状匹配件,无安全螺母的42mm内宽,凸形凹形匹配件,软管和封闭连接末端旋转匹配件,连接环 | Couplings for compresd air - Claw coupling, 42 mm internal width, without curing nut - Coupling with male, female, ho and closure connection ends, rotary claw couplings, joint ring | |
DIN 47632-1-1978 | 1KV以下的塑料绝缘电力电缆用热缩塑料软管的连接套管.保护性连接套管 | Joint boxes of heat-shrinking plastic-ho for plastic insulated power cables up to 1000 V; joint protection boxes | |
DIN 47632-2-1978 | 1KV以下的塑料绝缘电力电缆用热缩塑料软管的连接套管.内套管 | Joint boxes of heat-shrinking plastic-ho for plastic insulated power cables up to 1000 V; internal joint boxes | |
DIN 47632-3-1978 | 1KV以下的塑料绝缘电力电缆用热缩塑料软管的连接套管.导线横截面的配置 | Joint boxes of heat-shrinking plastic-ho for plastic insulated power cables up to 1000 V; allocation of conductor cross ctions | |
| 蛤蟆 DIN 47632-4-1978 | 1KV以下的塑料绝缘电力电缆用热缩塑料软管的连接套管.内部结构 | Joint boxes of heat-shrinking plastic-ho for plastic insulated power cables up to 1000 V; internal construction | |
DIN 4815-2-1979 | 液化气用软管.软管组件 | Hos for LPG; ho asmblies | |
DIN 4815-3-1985 | 液化气用软管.运输车辆用加气和排空用软管管道 | Flexible tubes for LPG; flexible tubes for filling and emptying of transportation vehicles | |
DIN 4815-4-1987 | 液化石油气用软管.车辆燃气装置用软管和软管组件 | Hos for LPG; hos and ho asmblies for fuel gas installations in vehicles | |
DIN 4815-5-1988 | 液化气用软管.车辆液化气管道用软管接合器.第5部分:安全要求概念、试验、标记 | Hos for LPG; coupling for LPG ho asmblies in vehicles; concepts safety requirements, tests, marking | |
DIN 49012-1982 | 电气装置用导管和管件.用于重机械应力的金属软管.结构形式和要求 | Conduits and fittings for electrical installation; flexible metal conduits for heavy mechanical stress construction types and requirements | |
DIN 5065-1987 | 包装.金属及塑料软管用端口塑料密封物 | Packaging; plastic closures for metal and plastic tubes | |
DIN 6103-2002 | 包装材料.圆柱形塑料软管.同轴多层管.尺寸、材料 | Means of packaging - Flexible cylindrical plastic tubes - Coex multilayer tube; Dimensions, materials | |
DIN 65164-1-1997 | 航空航天.非金属编织软管.第1部分:尺寸、重量 | Aerospace - Non metallic braided cable sleevings - Part 1: Dimensions, mass | |
DIN 65164-2-1997 | 航空航天.非金属编织软管.第2部分:技术规范 | Aerospace - Non metallic braided cable sleevings - Part 2: Technical specification | |
DIN 65178-6-1987 | 航空航天.液体管道的构造和设计.软管组件、制造 | Aerospace; configuration and design of fluid pipelines; ho asmblies, manufacture | |
DIN 65210-1-1987 | 航空航天.额定压力最高可达 210 巴的软管组件.第1部分:软管技术规范 | Aerospace; ho asmblies for nominal pressures up to 210 bar; technical specification for hos | |
DIN 65210-2-1987 | 航空航天.额定压力最高可达 210 巴的软管组件.第2部分:软管配件技术规范 | Aerospace; ho asmblies for nominal pressures up to 210 bar; technical specification for ho fittings | |
DIN 65210-3-1987 | 航空航天.额定压力最高可达 210 巴的软管组件.第3部分:成套软管组件技术规范 | Aerospace; ho asmblies for nominal pressures up to 210 bar; technical specification for complete ho asmblies | |
DIN 65211-1-1987 | 航空航天.额定压力最高可达 210 巴的软管组件.第1部分:软管技术规范 | Aerospace; ho asmblies for a nominal pressure of 210 bar; technical specification for hos | |
DIN 65211-2-1987 | 航空航天.额定压力最高可达 210 巴的软管组件.第2部分:软管配件技术规范 | Aerospace; ho asmblies for a nominal pressure of 210 bar; technical specification for ho fittings | |
DIN 65211-3-1987 | 航空航天.额定压力最高可达 210 巴的软管组件.第2部分:成套软管组件技术规范 | Aerospace; ho asmblies for a nominal pressure of 210 bar; technical specification for complete ho asmblies | |
DIN 65212-1988 | 航空航天.仪表的低压软管.技术规范 | Aerospace; instrumentation low pressure hos; technical specification | |
DIN 65213-1988颈椎枕有用吗 | 航空航天.公称压力为35巴以下的套管连接用软管.技术规范 | Aerospace; hos for sleeve attachment for nominal pressures up to 35 bar; technical specification | |
DIN 73379-1-1997 | 燃油软管.第1部分:尺寸、材料、标记 | Fuel hos - Part 1: Dimensions, material, marking | |
DIN 73379-2-1997 | 燃油软管.第2部分:要求和试验 | Fuel hos - Part 2: Requirements and tests | |
DIN 73411-1-1996 | 汽车冷却管.软管和元件.第1部分:尺寸、材料、类型 | Cooling pipes in motor vehicles - Hos and compounds - Part 1: Dimensions, materials, types | |
DIN 73411-2-1996 | 汽车冷却管.软管和化合物.第2部分:要求和试验 | Cooling pipes in motor vehicles - Hos and compounds - Part 2: Requirements, testing | |
DIN 74225-1991 | 液压制动软管组件.制动用软管接头.制动软管夹 | Brake ho asmblies; brake ho fittings; brake ho clips | |
DIN 74286-1988 | 气压制动系统.双管气压制动系统的软管联结器的密封圈 | Air braking systems; packing rings for ho couplings for double line braking systems | |
DIN 74304-1987 | 压接管接头.软管接头 | Compression coupling; ho coupling | |
DIN 74310-1-1993 | 气压制动设备.软管.尺寸、材料、标志 | Air braking systems; hos; dimensions, material, marking | |
DIN 74310-2-1993 | 气压制动设备.软管.要求、试验 | Air braking systems; hos; requirements, tests | |
DIN 74325-1988 | 气压制动系统.软管连接管.形状和尺寸 | Air braking systems; ho nipples; shapes, dimensions | |
DIN 7591-1981 | 家用设备的水管配件.公称压力10巴的两端用软管连接的带扁平垫圈的螺纹连接管 | Water fittings for domestic installation; Screwed unions with flat gasket for ho connection on either side, designed for nominal pressure 10 | |
DIN 7714-1975 | 硬橡胶管 | Ebonite pipes | |
DIN 7715-40-1998 | 橡胶产品.尺寸公差.软管 | Rubber products - Dimmensional tolerances; hos | |
DIN 85005-2-1999 | 船舶和海上技术.技术文献的图形符号.第2部分:管和软管组件.管和软管连接.套管 | Ships and marine technology - Graphical symbols for technical documentation - Part 2: Piping and ho asmblies, pipe and ho-joints, penetrations | |
DIN 8541-2-1987 | 焊接、切割和相关工艺用软管.燃料气体、氧气和其它不可燃气体用带外保护套的软管 | Hos for welding, cutting and allied process; hos with protective cover for u with fuel gas, oxygen and other non-combustible gas | |
DIN 8541-3-1995 | 焊接、切割和相关工艺用橡胶软管.第3部分:特殊要求用有涂层和无涂层的氧化橡胶软管.安全要求和检验 | Rubber hos for welding, cutting and allied process - Part 3: Oxygen rubber hos with and without coatings for special requirements; safety requirements and testing | |
DIN 86200-1989 | 灭火和甲板冲洗设备.软管接头.管件.软管.附件.造船用各类管件产品概要 | Fire extinguishing and wash deck installation; ho couplings, armatures, hos, accessories; summary of types for shipbuilding | |
DIN 86204-1993 | 船舶用黄铜制公称压力16的C型整体消防软管接头 | Solid fire ho coupling type C, PN 16; made of brass, for u on ships | |
DIN 86205-1993 | 船舶用黄铜制公称压力16的B型整体消防软管接头 | Solid fire ho coupling type B, PN 16; made of brass for u on ships | |
DIN 86211-1991 | 公称压力（PN）16、带C或B型消防软管管接头和带法兰连接的灭火阀 | Fire valves for PN 16, with fire ho couplings type C or B and with flange connection | |
DIN 9462-1987 | 航空航天.软管组件.测量 | Aerospace; ho asmblies; survey | |
DIN CEN/TS 14421-2007 | 压接和模锻的软管口和金属环 | Ho tail and ferrule for crimping and swaging; German version CEN/TS 14421:2006 | |
DIN EN 10324-2004 | 钢丝和钢丝制品.软管加筋线 | Steel wire and wire products - Ho reinforcement wire; German version EN 10324:2004 | |
DIN EN 1113-1997 | 盥洗室(PN 10)管件用淋浴喷头软管 | Showers hos for (PB 10) sanitary tapware; German version EN 1113:1997 | |
DIN EN 12115 Bb.1-2001 | 液体或气体化学品用橡胶和热塑软管和软管组件.规范.耐受性 | Rubber and thermoplastic hos and ho asmblies for liquid or gaous chemicals - Specification - Resistance | |
DIN EN 12115-1999 | 液体或气体化合物用橡胶和热塑性软管及软管组件.规范 | Rubber and thermoplastics hos and ho asmblies for liquid or gaous chemicals - Specification; German version EN 12115:1999 | |
DIN EN 12324-1-1999 | 灌溉方法.喷灌用绕软管轮系统.第1部分:尺寸系列 | 美国摇滚乐队Irrigation technic - Reel machine systems - Part 1: Size ries; German version EN 12324-1:1998 | |
DIN EN 12375-1998 | 包装.铝软管.管壁厚度的测定方法 | Packaging - Flexible aluminium tubes - Wall thickness determination method; German version EN 12375:1998 | |
DIN EN 12377-1998 | 包装材料.软管材.封闭体的气密性试验方法 | Packaging - Flexible tubes - Test method for the air tightness of closures; German version EN 12377:1998 | |
DIN EN 12434-2000 | 低温容器.低温软管 | Cryogenic vesls - Cryogenic flexible hos; German version EN 12434:2000 | |
DIN EN 1256-2006 | 气焊设备.焊接、切割和相关工艺设备用软管组件规范 | Gas welding equipment - Specification for ho asmblies for equipment for welding, cutting and allied process; German version EN 1256:2006 | |
DIN EN 13045-2000 | 包装.圆柱形塑料软管.尺寸和公差 | Packaging - Flexible cylindrical plastic tubes - Dimensions and tolerances; German version EN 13045:2000 | |
DIN EN 13046-2000 | 包装.圆柱形金属软管.尺寸和公差 | Packaging - Flexible cylindrical metallic tubes - Dimensions and tolerances; German version EN 13046:2000 | |
DIN EN 13047-2000 | 包装.圆锥形金属软管.尺寸和公差 | Packaging - Flexible conical metallic tubes - Dimensions and tolerances; German version EN 13047:2000 | |
DIN EN 13048-2000 | 包装.铝软管.内部清漆薄膜厚度测量方法 | Packaging - Flexible aluminium tubes - Internal lacquer film thickness measurement method; German version EN 13048:2000 | |
DIN EN 13180-2002 | 建筑物通风.通气管结构.软管尺寸和机械要求 | Ventilation for buildings - Ductwork - Dimensions and mechanical requirements for flexible ducts; German version EN 13180:2001 | |
DIN EN 1327-1996 | 气焊机.焊接及相关工艺用热塑软管 | Gas welding equipment - Thermoplastic hos for welding and allied process; German version EN 1327:1996 | |
DIN EN 13461-2001 | 包装.圆柱形层压软管.尺寸和公差 | Packaging - Cylindrical flexible laminated tubes - Dimensions and tolerances; German version EN 13461:2001 | |
DIN EN 13482-2002 | 沥青用橡胶软管及软管组件.规范 | Rubber hos and ho asmblies for asphalt and bitumen - Specification; German version EN 13482:2001 | |
DIN EN 13483-2005 | 可测量的燃料分配系统用带内部蒸气回收的橡胶和塑料软管和软管组件.规范 | Rubber and plastic hos and ho asmblies with internal vapour recovery for measured fuel dispensing systems - Specification; German version EN 13483:2005 | |
DIN EN 1360-2005 | 已测燃料分配系统用橡胶和塑料软管及软管组件.规范 | Rubber and plastic hos and ho asmblies for measured fuel dispensing systems - Specification; German version EN 1360:2005 | |
DIN EN 1361-2004 | 航空燃料输送用橡胶软管和软管组件.规范 | Rubber hos and ho asmblies for aviation fuel handling - Specification; German version EN 1361:2004 | |
DIN EN 13765-2003 | 烃类、溶剂和化学品输送用热塑性多层(非硫化)塑料软管和软管组件.规范 | Thermoplastic multi-layer (non-vulcanized) hos and ho asmblies for the transfer of hydrocarbons, solvents and chemicals - Specification; German version EN 13765:2003 | |
DIN EN 13766-2003 | 液化石油气和液化天然气输送热塑性多层非硫化软管和软管组件.规范 | Thermoplastic multi-layer (non-vulcanized) hos and ho asmblies for the transfer of liquid petroleum gas and liquefied natural gas - Specification; German version EN 13766:2003 | |
DIN EN 138-1994 | 呼吸防护器.清洁空气.全面罩、半面罩或口罩连接软管装置.要求、测试,标记 | Respiratory protective devices - Fresh air ho breathing apparatus for u with full face mask, half mask or mouthpiece asmbly - Requirements, testing, marking; German version EN 138:1994 | |
DIN EN 13905-2003 | 卫生设备旋塞用低阻力淋浴软管 | Low resistance shower hos for sanitary tapware; German version EN 13905:2003 | |
DIN EN 14420-1-2007 | 带夹具的软管配件.第1部分:要求、检查、名称与符号和试验 | Ho fittings with clamp units - Part 1: Requirements, survey, designation and testing; English version of DIN EN 14420-1:2007-04 | |
DIN EN 14420-2-2005 | 带夹件的软管配件.第2部分:软管尾部的软管侧面部件 | Ho fittings with clamp units - Part 2: Ho side parts of ho tail; German version EN 14420-2:2004 | |
DIN EN 14420-3-2005 | 带夹件的软管配件.第3部分:栓接或销接夹件 幼儿园教育论文 | Ho fittings with clamp units - Part 3: Clamp units, bolted or pinned; German version EN 14420-3:2004 | |
DIN EN 14420-4-2007 | 带夹具的软管配件.第4部分:法兰接头 | Ho fittings with clamp units - Part 4: Flange connections; English version of DIN EN 14420-4:2007-04 | |
DIN EN 14420-5-2005 | 带夹件的软管配件.第5部分:螺纹连接 | Ho fittings with clamp units - Part 5: Threaded connections; German version EN 14420-5:2004 | |
DIN EN 14420-6-2007 | 带夹具的软管配件.第6部分:TW油罐车接头 | Ho fittings with clamp units - Part 6: TW tank truck couplings (includes Amendment A1:2007); English version of DIN EN 14420-6:2004+A1:2007-04 | |
DIN EN 14420-7-2007 | 带夹件的软管配件.第7部分:凸轮锁紧接头 | Ho fittings with clamp units - Part 7: Cam locking couplings (includes Amendment A1:2007); English version of DIN EN 14420-7:2007-04 | |
DIN EN 14420-8-2007 | 带夹具的软管配件.第8部分:对称半节管接头(吉尔曼系统) | Ho fittings with clamp units - Part 8: Symmetrical half coupling (Guillemin system) (includes Amendment A1:2007); English version of DIN EN 14420-8:2007-04 | |
DIN EN 14422-2005 | LPG传送软管用对壳式耦合组件 | Clamp type coupling asmblies for LPG transfer hos; German version EN 14422:2004 | |
DIN EN 14423-2005 | 额定电压18巴及以下的蒸汽软管用对壳式耦合组件 | Clamp type coupling asmblies for u with steam hos rated for pressures up to 18 bar; German version EN 14423:2004 | |
DIN EN 14424-2005 | 带螺旋箍的软管管件 | Ho fittings with screwed ferrules; German version EN 14424:2004 | |
DIN EN 14454-2005 | 防饮用水回流污染的装置.软管接头防回流装置DN 15至DN 32. A型H系列 | Devices to prevent pollution by backflow of potable water - Ho union backflow preventer DN 15 to DN 32 - Family H; type A; German version EN 14454:2005 | |
DIN EN 14540-2007 | 灭火软管.固定系统用非渗滤扁平软管 | Fire-fighting hos - Non-percolating layflat hos for fixed systems; German version EN 14540:2004 + A1:2007 | |
DIN EN 14585-1 Bb.1-2006 | 压力设备用波纹金属软管组件.第2部分:合格评定程序使用指南 | Corrugated metal ho asmblies for pressure applications - Guidance on the u of conformity asssment procedures; English version of DIN EN 14585-1 Supplement 1:2006-04 | |
DIN EN 14585-1-2006 | 压力设备用波纹金属软管组件.第1部分:要求 | Corrugated metal ho asmblies for pressure applications - Part 1: Requirements; German version EN 14585-1:2006 | |
DIN EN 14800-2007 | 使用气体燃料连接家用器具的波纹状安全金属软管组件 | Corrugated safety metal ho asmblies for the connection domestic appliance using gaous fuels; German version EN 14800:2007 | |
DIN EN 1736-2000 | 制冷系统和热泵.软管元件、隔振器和膨胀节.要求、设计和安装 | Refrigerating systems and heat pumps - Flexible pipe elements, vibration isolators and expansion joints - Requirements, design and installation; German version EN 1736:2000 | |
DIN EN 1761-1999 | 油罐车输油橡胶软管和软管组件.规范 | Rubber hos and ho asmblies for fuel truck delivery - Specification; German version EN 1761:1999 | |
DIN EN 1762-2004 | 25巴(2.5MPA)及以下液化石油气、LPG(液相和气相)和天然气用橡胶软管和软管组件.规范 | Rubber hos and ho asmblies for liquefied petroleum gas, LPG (liquid or gaous pha) and natural gas up to 25 bar (2,5 MPa) - Specification; German version EN 1762:2003 | |
DIN EN 1763-1-2001 | 商用汽态丙烷、丁烷及其混合物用橡胶和塑料管、软管和配件.第1部分:橡胶管、塑料管和软管要求 | Rubber and plastics tubing, hos and asmblies for u with commercial propane, commercial butane and their mixture in the vapour pha - Part 1: Requirements for rubber and plastics tubing and hos; German version EN 1763-1:2000 | |
DIN EN 1763-1-2001 | 商用汽态丙烷、丁烷及其混合物用橡胶和塑料管、软管和配件.第1部分:橡胶管、塑料管和软管要求 | Rubber and plastics tubing, hos and asmblies for u with commercial propane, commercial butane and their mixture in the vapour pha - Part 1: Requirements for rubber and plastics tubing and hos; German version EN 1763-1:2000 | |
DIN EN 1765-2005 | 油的吸放设备用橡胶软管组件.组件规范 | Rubber ho asmblies for oil suction and discharge rvices - Specification for the asmblies; German version EN 1765:2004 | |
DIN EN 1947-2007 | 消防软管.泵和水车用半刚性输水软管和软管组件 | Fire-fighting hos - Semi-rigid delivery hos and ho asmblies for pumps and vehicles; German version EN 1947:2002 + A1:2007 | |
DIN EN 24641-1993 | 给排水橡胶软管.要求 | Rubber hos for water suction and discharge; specification (ISO 4641:1991); German version EN 24641:1993 | |
DIN EN 26801-1993 | 橡胶和塑料软管.体积膨胀的测定 | Rubber or plastics hos; determination of volumetric expansion (ISO 6801:1983); German version EN 26801:1993 | |
DIN EN 26802-1993 | 金属丝增强的橡胶和塑料软管组件.挠曲状态下液压脉冲试验 | Rubber and plastics ho and ho asmblies with wire reinforcements; hydraulic impul test with flexing (ISO 6802:1991); german version EN 26802:1993 | |
DIN EN 269-1994 | 呼吸防护器.加护罩的电动式新鲜空气软管呼吸器.要求、检验、标记; 德文版本 EN 269:1994 | Respiratory protective devices - Powered fresh air ho breathing apparatus incorporating a hood - Requirements, testing, marking; German version EN 269:1994 | |
DIN EN 27326-1993 | 橡胶和塑料软管.静态条件下耐臭氧性能的评定 | Rubber and plastics hos; asssment of ozone resistance under static conditions (ISO 7326:1991); German version EN 27326:1993 | |
DIN EN 28029-1993 | 塑料软管.一般用途的纺织物增强的可折叠水管 | Plastics ho; general purpo collapsible water ho, textile reinforced; specification (ISO 8029:1985); German version EN 28029:1993 | |
DIN EN 29168-1994 | 手持式牙科器械.软管连接件 | Dental handpieces - Ho connectors (ISO 9168:1991); German version EN 29168:1994 | |
DIN EN 559-2003 | 气焊机.焊接、切割和相关工艺用橡胶软管 | Gas welding equipment - Rubber hos for welding, cutting and allied process; German version EN 559:2003 | |
DIN EN 560-2005 | 气焊设备.焊接、切割和相关工艺用设备的软管连接 | Gas welding equipment - Ho connections for equipment for welding, cutting and allied process; German version EN 560:2005 | |
DIN EN 60684-3-151-1999 | 绝缘软管套.第3部分:各类管套的规范.第151页:挤压成型的聚氯乙烯/腈橡胶管套.一般应用 | Flexible insulating sleeving - Part 3: Specification for individual types of sleeving; Sheet 151: Extruded PVC/nitrile sleeving; general purpo (IEC 60684-3-151:1998); German version EN 60684-3-151:1998 | |
DIN EN 60684-3-151-1999 | 绝缘软管套.第3部分:各类管套的规范.第151页:挤压成型的聚氯乙烯/腈橡胶管套.一般应用 | Flexible insulating sleeving - Part 3: Specification for individual types of sleeving; Sheet 151: Extruded PVC/nitrile sleeving; general purpo (IEC 60684-3-151:1998); German version EN 60684-3-151:1998 | |
DIN EN 60684-3-212 Berichtigung 1-2007 | 绝缘软管.第3部分:各种型号软管规范.活页212:热收缩聚烯烃软管 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 212: Heat-shrinkable polyolefin sleevings (IEC 60684-3-212:2005); German version EN 60684-3-212:2006, Corrigenda to DIN EN 60684-3-212 (VDE 0341-3-212):2006-08; CENELEC-Corrigendum November 2006 to EN 60684-3-212:2006 | |
DIN EN 60684-3-212-2006 | 绝缘软套管.第3部分:各种型号软管规范.活页212:热收缩聚烯烃软管 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 212: Heat-shrinkable polyolefin sleevings (IEC 60684-3-212:2005); German version EN 60684-3-212:2006 | |
DIN EN 60684-3-228-2005 | 绝缘软套管.第3部分:各种型号软管规范.活页228:阻燃、耐流体、收缩比2:1的热收缩、半硬质聚偏二氟乙烯软管 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 228: Heat-shrinkable, mi-rigid polyvinylidene fluoride sleeving, flame retarded, fluid resistant, shrink ratio 2:1 (IEC 60684-3-228:2004); German version EN 60684-3-228:2004 | |
DIN EN 60684-3-233-2006 | 绝缘软管衬.第3部分:各类管衬的规范.第233页:阻燃的耐流体的收缩比为2:1的热收缩含氟弹性管套(IEC 60684-3- | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 233: Heat-shrinkable, fluoroelastomer sleeving, flame retarded, fluid resistant, shrink ratio 2:1 (IEC 60684-3-233:2006); German version EN 60684-3-233:2006 | |
DIN EN 60684-3-240 bis 243-2003 | 绝缘软管.第3部分:各型软管规范.240至243节:热收缩聚四氟乙烯(PTFE)绝缘软管 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheets 240 to 243: Heat-shrinkable PTFE sleeving (IEC 60684-3-240 to 243:2002); German version EN 60684-3-240 to 243:2002 | |
DIN EN 60684-3-271-2005 | 绝缘软套管.第3部分:各种型号软管规范.活页271:阻燃、耐流体、收缩比2:1的热收缩高弹性软管 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 271: Heat-shrinkable elastomer sleeving, flame retarded, fluid resistant, shrink ratio 2:1 (IEC 60684-3-271:2004); German version EN 60684-3-271:2004 | |
DIN EN 60684-3-300-2003 | 绝缘软管.第3部分:各型软管规范.300节:无涂层玻璃纤维编织软管 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheet 300: Glass textile fibre sleeving, braided, uncoated (IEC 60684-3-300:2002); German version EN 60684-3-300:2002 | |
DIN EN 60684-3-320-2003 | 绝缘软管.第3部分:各型软管规范.320节:轻度浸渍的聚对苯二甲酸乙二醇酯编织物 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheet 320: Polyethylene terephthalate textile sleeving, lightly impregnated (IEC 60684-3-320:2002); German version EN 60684-3-320:2002 | |
DIN EN 60684-3-343 bis 345-2003 | 绝缘软管.第3部分:各型软管规范.343至345节:无涂层可扩张乙烯三氟氯乙烯纤维编织软管 | Flexible insulating sleeving - Part 3: Specification for individual types of sleeving; Sheets 343 to 345: Expandable braided ethylene chlorotrifluoroethylene (E-CTFE) textile sleeving, uncoated (IEC 60684-3-343 to 345:2002); German version EN 60684-3-343 to 345:2002 | |
DIN EN 60684-3-400 bis 402-2003 | 绝缘软管.第3部分:各型软管规范.400至402节:带硅弹性涂层的玻璃纤维软管 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheets 400 to 402: Glass textile sleeving with silicone elastomer coating (IEC 60684-3-400 to 402:2002); German version EN 60684-3-400 bis 402:2002 | |
DIN EN 60684-3-403 bis 405-2003 | 绝缘软管.第3部分:各型软管规范.403至405节:丙烯酸酯玻璃纤维编织软管 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheets 403 to 405: Glass textile sleeving with acrylic coating (IEC 60684-3-403 to 405:2002); German version EN 60684-3-403 to 405:2002 | |
DIN EN 60684-3-406 bis 408-2004 | 绝缘软管.第3部分:各种型号软管规范.活页406-408:带PVC涂层的玻璃纤维编织软管 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 406 to 408: Glass textile sleeving with PVC coating (IEC 60684-3-406 bis 408:2003); German version EN 60684-3-406 bis 408:2003 | |
DIN EN 60684-3-420 bis 422-2003 | 绝缘软管.第3部分:各型软管规范.420至422节:丙烯酸酯聚酯纤维软管 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheets 420 to 422: Polyethylene terephthalate textile sleeving with acrylic bad coating (IEC 60684-3-420 to 422:2002); German version EN 60684-3-420 bis 422:2002 | |
DIN EN 61479-2002 | 带电作业.绝缘材料的柔性导体封盖物 (线路软管) (IEC 61479:2001 + A1:2002); 德文版本 EN 61479:2001 + A1 | Live working - Flexible conductor covers (line hos) of insulating material (IEC 61479:2001 + A1:2002); German version EN 61479:2001 + A1:2002 | |
DIN EN 61770-2007 | 与总水管连接的电气器具.避免软管组件的反虹吸和失效 | Electric appliances connected to the water mains - Avoidance of backsiphonage and failure of ho-ts (IEC 61770:1998 + A1:2004 + A2:2006); German version EN 61770:1999 + Corrigendum December 2005 + A1:2004 + A2:2006 | |
DIN EN 62237-2005 | 带电作业.液压工具和设备用带配件的绝缘软管 | Live working - Insulating hos with fittings for u with hydraulic tools and equipment (IEC 62237:2003, modified); German version EN 62237:2005 | |
DIN EN 671-1-2001 | 固定式消防系统.水龙带系统.第1部分:半刚性水龙带的软管卷盘; 德文版本 EN 671-1:2001 | Fixed firefighting systems - Ho systems - Part 1: Ho reels with mi-rigid ho; German version EN 671-1:2001 | |
DIN EN 671-2/A1-2004 | 固定式消防系统.软管系统.第2部分:带吹塑软管的软管系统 | Fixed firefighting systems - Ho systems - Part 2: Ho systems with lay-flat ho; German version EN 671-2:2001/A1:2004 | |
DIN EN 671-3-2000 | 固定的消防设备.软管系统.第3部分:半钢性软管卷曲机和扁平软管系统维修 | Fixed firefighting systems - Ho systems - Part 3: Maintenance of ho reels with mi-rigid ho and ho systems with lay-flat ho; German version EN 671-3:2000 + AC:2000 | |
DIN EN 694-2007 | 消防软管.固定系统用半刚性软管 | Fire-fighting hos - Semi-rigid hos for fixed systems; German version EN 694:2001 + AC:2002 + AC:2003 + A1:2007 | |
DIN EN 739-2002 | 医疗气体用低压软管组件(包括修改件A1:2002); 德文版本 EN 739:1998 + A1:2002 | Low-pressure ho asmblies for u with medical gas (includes Amendment A1:2002); German version EN 739:1998 + A1:2002 | |
DIN EN 853-1997 | 橡胶软管和软管组件.带金属丝编织层的液压软管.规范 | Rubber hos and ho asmblies - Wire braid reinforced hydraulic type - Specification; German version EN 853:1996 | |
DIN EN 854-1997 | 橡胶软管和软管组件.带织物编织层的液压软管.规范力学思维导图 | Rubber hos and ho asmblies - Textile reinforced hydraulic type - Specification; German version EN 854:1996 | |
DIN EN 855-1997 | 塑料软管和软管组件.带织物编织层的塑料液压软管.规范 | Plastic hos and ho asmblies - Thermoplastics textile reinforced hydraulic type - Specification; German version EN 855:1996 | |
DIN EN 856-1997 | 橡胶软管和软管组件.带金属丝螺旋垫层的液压软管.规范 | Rubber hos and ho asmblies - Rubber-covered spiral wire reinforced hydraulic type - Specification; German version EN 856:1996 | |
DIN EN 857-1997 | 橡胶软管和软管组件.带金属丝编织层的紧凑型液压软管.规范 | Rubber hos and ho asmblies - Wire braid reinforced compact type for hydraulic applications - Specification; German version EN 857:1996 | |
DIN EN 908-1999 | 农林机械.带软管卷筒的喷灌机.安全性 | Agricultural and forestry machinery - Reel machines for irrigation - Safety; German Version EN 908:1999 | |
DIN EN ISO 10380-2003 | 管道系统.波纹状金属软管和软管组件 | Pipework - Corrugated metal ho and ho asmblies (ISO 10380:2003); German version EN ISO 10380:2003 | |
DIN EN ISO 10806-2004 | 管道工程.波纹状金属软管用配件 | Pipework - Fittings for corrugated metal hos (ISO 10806:2003); German version EN ISO 10806:2003 | |
DIN EN ISO 10807-1997 | 管道工程.爆燃性空气电缆保护用波纹金属软管组件 | Pipework - Corrugated flexible metallic ho asmblies for the protection of electrical cables in explosive atmospheres (ISO 10807:1994); German version EN ISO 10807:1996 | |
DIN EN ISO 10960-1996 | 橡胶和塑料软管.动态耐臭氧性评估 | Rubber and plastics hos - Asssment of ozone resistance under dynamic conditions (ISO 10960:1994); German version EN ISO 10960:1996 | |
DIN EN ISO 11758-1997 | 橡胶和塑料软管.氙弧灯曝光.颜色和外观变化 | Rubber and plastics hos - Exposure to a xenon arc lamp - Determination of changes in colour and appearance (ISO 11758:1995); German version EN ISO 11758:1997 | |
DIN EN ISO 1307-1996 | 工业通用橡胶和塑料软管.内径和公差、长度公差 (ISO 1307:1992); 德文版本 EN ISO 1307:1995 | Rubber and plastics hos for general-purpo industrial applications - Bore diameters and tolerances, and tolerances on length (ISO 1307:1992); German version EN ISO 1307:1995 | |
DIN EN ISO 13628-2-2006 | 石油天然气工业.海底生产系统设计和操作.第2部分:海底和船用自由软管系统(ISO 13628-2-2006) | Petroleum and natural gas industries - Design and operation of suba production systems - Part 2: Unbonded flexible pipe systems for suba and marine applications (ISO 13628-2:2006); English version EN ISO 13628-2:2006 | |
DIN EN ISO 1401-2000 | 农业喷灌用橡胶软管 | Rubber hos for agricultural spraying (ISO 1401:1999); German version EN ISO 1401:1999 | |
DIN EN ISO 1402-1996 | 橡胶和塑料软管及软管组件.液压静力试验 | Rubber and plastics hos and ho asmblies - Hydrostatic testing (ISO 1402:1994); German version EN ISO 1402:1996 | |
DIN EN ISO 14113-1997 | 气焊设备.最大设计压力不超过450巴液化气橡胶及塑料软管组件 | Gas welding equipment - Rubber and plastic hos asmbled for compresd or liquefied gas up to a maximum design pressure of 450 bar (ISO 14113:1997); German version EN ISO 14113:1997 | |
DIN EN ISO 15465-2004 | 管道工程.带绕金属软管和软管配件 | Pipework - Stripwound metal hos and ho asmblies (ISO 15465:2004); German version EN ISO 15465:2004 | |
DIN EN ISO 15540-2002 | 船舶和航海技术.软管组件耐燃性.试验方法 | Ships and marine technology - Fire resistance of ho asmblies - Test methods (ISO 15540:1999); German version EN ISO 15540:2001 | |
DIN EN ISO 15541-2002 | 船舶和航海技术.软管组件耐燃性.试验板要求 | Ships and marine technology - Fire resistance of ho asmblies - Requirements for the test bench (ISO 15541:1999); German version EN ISO 15541:2001 | |
DIN EN ISO 1746-2000 | 橡胶或塑料软管和管道.弯曲试验 | Rubber or plastics hos and tubing - Bending tests (ISO 1746:1998, including Technical Corrigendum 1:1999); German version EN ISO 1746:2000 | |
DIN EN ISO 2398-1997 | 压缩空气用纺织纤维增强橡胶软管.规范 | Rubber ho, textile-reinforced, for compresd air - Specification (ISO 2398:1995); German version EN ISO 2398:1997 | |
DIN EN ISO 3861-1997 | 喷砂橡胶软管.规范 | Rubber hos for sand and grit blasting - Specification (ISO 3861:1995); German version EN ISO 3861:1997 | |
DIN EN ISO 3994-2000 | 塑料软管.给排含水物质用螺旋热塑塑料增强的热塑塑料软管.规范 | Plastics hos - Helical-thermoplastic-reinforced thermoplastics hos for suction and discharge of aqueous materials - Specification (ISO 3994:1998); German version EN ISO 3994:2000 | |
DIN EN ISO 4023-1995 | 蒸汽用橡胶软管.试验方法 (ISO 898-7:1992); 德文版本 EN 20898-7:1995 | Rubber hos for steam - Test methods (ISO 4023:1991); German version EN ISO 4023:1995 | |
DIN EN ISO 4080-1995 | 橡胶和塑料软管和软管组件.透气性测定 (ISO 4080:1991); 德文版本 EN ISO 4080:1995 | Rubber and plastics hos and ho asmblies - Determination of permeability to gas (ISO 4080:1991); German version EN ISO 4080:1995 | |
DIN EN ISO 4671-2000 | 橡胶和塑料软管及软管组件.尺寸测量方法 | Rubber and plastics hos and ho asmblies - Methods of measurement of dimensions (ISO 4671:1999); German version EN ISO 4671:2000 | |
DIN EN ISO 4672-1999 | 橡胶和塑料软管.低于室温的柔性试验 | Rubber and plastics hos - Sub-ambient temperature flexibility tests (ISO 4672:1997); German version EN ISO 4672:1999 | |
DIN EN ISO 5771-1996 | 输送无水氨用橡胶软管和软管组件.规范 | Rubber ho and ho asmblies for transferring anhydrous ammonia - Specification (ISO 5771:1994, including Corr 1:1995); German version EN ISO 5771:1996 | |
DIN EN ISO 5774-2000 | 压缩空气用织物增强塑料软管.规范 | Plastics hos, textile-reinforced, for compresd air - Specification (ISO 5774:1997); German version EN ISO 5774:2000 | |
DIN EN ISO 6134-2006 | 饱和蒸汽用橡胶软管和软管组件.规范(ISO 6134-2005).德文版本 EN ISO 6134-2005 | Rubber hos and ho asmblies for saturated steam - Specification (ISO 6134:2005); German version EN ISO 6134:2005 | |
DIN EN ISO 6224-1997 | 带织物加固内衬的橡胶供水软管.规范 | Plastics hos, textile-reinforced, for general-purpo water applications - Specification (ISO 6224:1995); German version EN ISO 6224:1997 | |
DIN EN ISO 6803-1997 | 橡胶和塑料软管及软管组件.无弯曲液压压力脉冲试验 | Rubber or plastics hos and ho asmblies - Hydraulic-pressure impul test without flexing (ISO 6803:1994); German version EN ISO 6803:1997 | |
DIN EN ISO 6806-1996 | 油燃烧器软管和软管组件.规范 | Rubber hos and ho asmblies for u in oil burners - Specification (ISO 6806:1992); German version EN ISO 6806:1995 | |
DIN EN ISO 6807-2004 | 旋转式钻探和振动装置用橡胶软管和软管组件.规范 | Rubber hos and ho asmblies for rotary drilling and vibration applications - Specification (ISO 6807:2003); German version EN ISO 6807:2003 | |
DIN EN ISO 6808-2000 | 给排油用塑料软管及软管组件.规范 | Plastics hos and ho asmblies for suction and low-pressure discharge of petroleum liquids - Specification (ISO 6808:1999); German version EN ISO 6808:2000 | |
DIN EN ISO 6945-2000 | 橡胶软管.外覆层耐磨性的测定 | Rubber hos - Determination of abrasion resistance of the outer cover (ISO 6945:1991) (including Amendment A1); German version EN ISO 6945:1996 + A1:2000 | |
DIN EN ISO 7233-1995 | 橡胶和塑料软管和软管组件.吸入阻力测定 (ISO 7233:1991); 德文版本 EN ISO 7233:1995 | Rubber and plastics hos and ho asmblies - Determination of suction resistance (ISO 7233:1991); German version EN ISO 7233:1995 | |
DIN EN ISO 7369-2005 | 管道工程.金属软管和软管组件.词汇 | Pipework - Metal hos and ho asmblies - Vocabulary (ISO 7369:2004); Trilingual version EN ISO 7369:2004 | |
DIN EN ISO 7662-1996 | 橡胶和塑料软管.内衬磨损测定 | Rubber and plastics hos - Determination of abrasion of lining (ISO 7662:1988); German version EN ISO 7662:1996 | |
DIN EN ISO 7751-1997 | 橡胶和塑料软管及软管组件.试验压力和爆破压力与设计工作压力的比值 (ISO 7751:1991); 德文版本 EN ISO 775 | Rubber and plastics hos and ho asmblies - Ratios of proof and burst pressure to design working pressure (ISO 7751:1991); German version EN ISO 7751:1997 | |
DIN EN ISO 7840-2004 | 小艇.耐火燃油软管 | Small craft - Fire resistant fuel hos (ISO 7840:2004); German version EN ISO 7840:2004 | |
DIN EN ISO 8028-2000 | 真空喷漆用橡胶和/或塑料软管组件.规范 | Rubber and/or plastics hos and ho asmblies for airless paint spraying - Specification (ISO 8028:1999); German version EN ISO 8028:2000 | |
DIN EN ISO 8030-1998 | 橡胶和塑料软管.易燃烧性试验方法 | Rubber and plastics hos - Method of test for flammability (ISO 8030:1995); German version EN ISO 8030:1997 | |
DIN EN ISO 8031-1997 | 橡胶和塑料软管及软管组件.电阻测定 | Rubber and plastics hos and ho asmblies - Determination of electrical resistance (ISO 8031:1993); German version EN ISO 8031:1997 | |
DIN EN ISO 8032-1999 | 橡胶和塑料软管组件.结合液压脉冲试验的软管弯曲试验(半Ω 型弯曲试验) | Rubber and plastics ho asmblies - Flexing combined with hydraulic impul test (half-omega test) (ISO 8032:1997); German version EN ISO 8032:1999 | |
DIN EN ISO 8033-2006 | 橡胶和塑料软管.元件间附着力的测定(ISO 8033:2006) | Rubber and plastics hos - Determination of adhesion between components (ISO 8033:2006); English version of DIN EN ISO 8033:2006-11 | |
DIN EN ISO 8308-1996 | 橡胶和塑料软管及管系.软管和管壁的透液量测定 | Rubber and plastics hos and tubing - Determination of transmission of liquids through ho and tubing walls (ISO 8308:1993); German version EN ISO 8308:1995 | |
DIN EN ISO 8330-2000 | 橡胶和塑料软管和软管组件.词汇 | Rubber and plastics hos and ho asmblies - Vocabulary (ISO 8330:1998); German version EN ISO 8330:2000 | |
DIN EN ISO 8469-2006 | 小型船舶.非耐火燃料软管 (ISO 8469-2006) | Small craft - Non-fire-resistant fuel hos (ISO 8469:2006); English version of DIN EN ISO 8469:2006-10 | |
DIN EN ISO 8580-1995 | 橡胶和塑料软管.静定状态下抗紫外线的测定 (ISO 8580:1987); 德文版本 EN ISO 8580:1995 | Rubber and plastics hos - Determination of ultra-violet resistance under static conditions (ISO 8580:1987); German version EN ISO 8580:1995 | |
DIN ISO 10502-1997 | 航空航天.温度为230℃以下气压为10500KPa时使用的聚四氟乙烯(PTFE)软管.采购规范 | Aerospace - Ho asmblies in polytetrafluoroethylene (PTFE) for u up to 232 °C and 10500 kPa - Procurement specification (ISO 10502:1992) | |
DIN ISO 12151-2-2004 | 液压传动和通用连接件.软管接头.第2部分:带ISO 8434-1和8434-4 24°锥形连接件末端和O形圈的软管接头 | Connections for hydraulic fluid power and general u - Ho fittings - Part 2: Ho fittings with ISO 8434-1 and ISO 8434-4 24° cone connector ends with O-rings (ISO 12151-2:2003) | |
DIN ISO 12151-3-2004 | 液压传动和通用连接件.软管接头.第3部分:带ISO 6162法兰末端的软管接头 | Connections for hydraulic fluid power and general u - Ho fittings - Part 3: Ho fittings with ISO 6162 flange ends (ISO 12151-3:1999) | |
DIN ISO 6772-1996 | 航空航天.流体系统.液压软管、管道和连接组件的脉冲试验 (ISO 6772:1988) | Aerospace - Fluid systems - Impul testing of hydraulic ho, tubing and fitting asmblies (ISO 6772:1988) | |
DIN ISO 7258-1987 | 航空航天.航空航天用聚四氟乙烯(PTFE)软管.密度和相对密度的测定方法.与ISO7258, 1984相同 | Aerospace; polytetrafluoroethylene (PTFE) tubing for aerospace applications; methods for the determination of the density and relative density; identical with ISO 7258, edition 1984 | |
DIN V 65900-13-1998 | 航空航天系列.液体和气体用的柔性软管和软管组件的设计及制造.安装 | Aerospace ries - Design and construction of flexible hos and ho asmblies for fluids in liquid and gaous condition - Installation (AECMA Technical Report TR 2675:1996 + Corrigendum 1997) | |
编号 | 中文名称 | 英文名称 | |
本文发布于:2023-06-25 13:14:57，感谢您对本站的认可！
本文链接：https://www.wtabcd.cn/fanwen/fan/82/1036446.html
版权声明：本站内容均来自互联网，仅供演示用，请勿用于商业和其他非法用途。如果侵犯了您的权益请与我们联系，我们将在24小时内删除。
| 留言与评论（共有 0 条评论） |
