齿轮参数中英对照
英文齿轮参数中文齿轮参数
number of teeth 齿数
normal module 法向模数
transver module 端面模数
addendum modification factor 变位系数
reference diameter 分度圆直径
tip diameter 齿顶圆直径
root diameter 齿根圆直径
ba diameter 基圆直径
prefinishing diameter 剃前渐开线起始圆直径
飞机的英语
control form diameter 渐开线检查有效直径
effective outside diameter 渐开线终止圆直径
lead 导程
normal pressure angle 法向压力角
transver pressure angle 端面压力角
helix angle 分度圆螺旋角
ba helix angle 基圆螺旋角
hand of helix 旋向
circular thickness on Dp 分度圆上弧齿厚
chordal addendum 弦齿高
normal circular thickness on Dp after finishing and heat treatment 分度圆弦齿厚ba tangent measur
ement after finishing and heat treatment 公法线长度dimension over f diameter balls or pin after finishing and heat treament 跨棒距backlash 总侧系
center distance 中心距
tool tip radius 刀具齿顶圆角半径
tooth tip fillet angle refered to axis 齿顶倒角
number of teeth of mating gear 配对齿轮齿数
Toothed gear；Gear 齿轮
Gear pair 齿轮副
Gear pair with parallel axes 平行轴齿轮副
Gear pair with intercting axes 相交轴齿轮副
Train of gears 齿轮系
Planetary gear train 行星齿轮系
Gear drive；Gear transmission 齿轮传动
Mating gears 配对齿轮
Pinion 小齿轮
Wheel；Gear 大齿轮
Driving gear 主动齿轮
六兮Driven gear 从动齿轮
Planet gear 行星齿轮
Planet carrier 行星架
Sun gear 太阳轮
Ring gear；Annulus gear 内齿圈
External gear 外齿轮
Internal gear 内齿轮
Centre distance 中心距
Shaft angle 轴交角
Line of centres 连心线
Speed reducing gear pair 减速齿轮副
Speed increasing gear pair 增速齿轮副
Gear ratio 齿数比
Transmission ratio 传动比
Axial plane 轴平面
Datum plane 基准平面
Pitch plane 节平面
Transver plane 端平面
Normal plane 法平面
Reference surface 分度曲面
Pitch surface 节曲面
Tip surface 齿顶曲面
Root surface 齿根曲面
Basic tooth profile 基本齿廓
Basic rack 基本齿条
Counterpart rack 产形齿条
Generating gear of a gear 产形齿轮
Generating flank 产形齿面
冠词的用法总结
Tooth space 齿槽
Right-hand teeth 右旋齿
Left-hand teeth 左旋齿
Gears with addendum modification；变位齿轮
Addendum modification factor 变位系数
X-gears上海青菜怎么做好吃
X-gear pair with reference centre distance 高度变位圆柱齿轮副X-gear pair with modified centre distance 角度变位圆柱齿轮副X-gear pair without shaft angle modification 高度变位锥齿轮副X-gear pair with shaft angle modification 角度变位圆柱齿轮副Modification coefficient 变位系数
Addendum modification 变位量
Addendum modification coefficient 径向变位系数
Centre distance modification coefficient 中心距变位系数Cylindrical gear 圆柱齿轮
Tip circle 顶圆
Root circle 根圆
Pitch 齿距
Angular pitch 齿距角
Ba tangent length 公法线长度
Reference diameter 分度圆直径
Pitch diameter 节圆直径
Fillet radius 齿根圆角半径
Tooth depth 齿高
Working depth 工作高度
Addendum 齿顶高
Dedendum 齿根高
Chordal height 弦齿高
Constant chord height 固定弦齿高
Facewidth 齿宽
需要造句
Effective facewidth 有效齿宽
Transver tooth thickness 端面齿厚
Normal tooth thickness 法向齿厚
Transver ba thickness 端面基圆齿厚
Normal ba thickness 法向基圆齿厚
Transver chordal tooth thickness 端面弦齿厚
Constant chord 固定弦齿厚
Crest width 端面齿顶厚
Normal crest width 法向齿顶厚
Transver spacewidth 端面齿槽宽
Normal spacewidth 法向齿槽宽
Tooth thickness half angle 齿厚半角
Spacewidth half angle 槽宽半角
Nominal pressure angle 齿形角
Arc-contact worm；hollow flank worm；ZC-worm 圆弧圆柱蜗杆
Enveloping worm with straight line grneratrix；TA worm 直廓环面蜗杆
Planar worm wheel；P-worm wheel 平面蜗杆
寸步难行Planar double enveloping worm；TP-worm 平面包络环面蜗杆
Planar double-enveloping worm wheel；TP-worm wheel 平面二次包络蜗杆
Toroid enveloping worm wheel；TK-worm wheel 锥面包络环面蜗杆
Toroid enveloping worm hich involute holicoid generatrix；TI-worm 渐开线包络环面蜗杆
Spiroid 锥蜗杆
Spiroid gear 锥蜗轮
Spiroid gear pair 锥蜗杆副
Mid-plane 中平面
Prolate hypocycloid 长幅内摆线
Curtate hypocycloid 短幅内摆线
Involute；渐开线
Involute to a circle
Prolate involute 延伸渐开线
Curtate involute 缩短渐开线
Spherical involute 球面渐开线
Involute helicoid 渐开螺旋面乐氏同仁堂
Screw helicoid 阿基米德螺旋面
Spherical involute helicoid 球面渐开螺旋面Toroid 圆环面
Generant of the toroit 圆环面的母圈
Middle circle of the toroid 圆环面的中性圈Middle-plane of the toroid 圆环面的中间平面Inner circle of the toroid 圆环面的内圈Meshing interference 啮合干涉
Cutter interference 切齿干涉
Profile modification；齿廓修型
Profile correction
雪人英文
Tip relief 修缘
Root relief 修根
Axial modification；齿向修形
Longitudinal correction
End relief 齿端修薄
Crowning 鼓形修整
Crowned teeth 鼓形齿
Undercut 挖根
Instantaneous axis 瞬时轴
Point of contact 瞬时接触点
Line of contact 瞬时接触线
Transver path of contact 端面啮合线Surface of action 啮合曲面
Plane of action 啮合平面
Zone of action 啮合区域
Total arc of transmission 总作用弧Transver arc of transmission 端面作用弧Overlap arc 纵向作用弧
Total angle of transmission 总作用角Transver angle of transmission 端面作用角Overlap angle 纵向作用角
Total contact ratio 总重合度
Transver ratio 端面重合度
Overlap ratio 纵向重合度
Standard gears 标准齿轮
X-gero gear 非变位齿轮
Referencr centre distance 标准中心距Nominal centre distance 名义中心距Reference cylinder 分度圆柱面
Pitch cylinder 节圆柱面
Basic cylinder 基圆柱面
Tip cylinder 齿顶圆柱面
Root cylinder 齿根圆柱面
