生物医学工程医疗仪器论文
中英文资料外文翻译文献
Prent status and problems of domestic medical instrument engineering. Biomedical Engineehng
In recent years considerable progress has been achieved in domestic medical instrument engineering. Many plants and scientific-rearch organizations of machine-making and the defen industry have changed their profile toward production of medical equipment.
However, medical equipment often meets a reluctant market becau of funding cuts in health rvices. Medical organizations often cannot satisfy even their basic requirements for diagnostic and therapeutic devices.
折树梨花Also, health rvice organizations tend to buy foreign rather than domestic medical equipment becau the former are easily available on the domestic market and prices for both are comparable becau of inflation.
The transition to a market economy in Russia has had substantial impact on the relations between domestic manufactur- ers and consumers of medical devices. The spectrum and quality of available ite
ms has been significantly extended in recent
years. It should be also noted that available models of medical devices are continuously updated, which makes them sufficiently competitive.
Reprentative information on the updating dynamics of domestic medical equipment is summarized in Table 1. The data were provided by the VNIIMP-VITA Joint-Stock Company, which compiles a data bank of such information.
七下英语单词表
食物保鲜Generally, new items account for 37% of total production of medical devices. Routinely produced devices (duration of production, 2-5 years) account for 28%. Medical devices of long-term production (5-10 years) account for 17% and obsolete nomenclature (devices produced for more than 10 years) accounts for 18%.
It is en from Table 1 that in recent years there has been considerable progress in the updating of production of medical equipment. For example, according to the VNIIMP-VITA Joint-Stock Company, the share of the items that have been produced for no longer than 5 years in 1988 did not exceed 35%, while now it is 65%. For the items that have been produced for more than 10 years such shares are 40 and 18%, respectively.
Updating of produced medical devices was encouraged by the increa in the number of designers and manufacturers, particularly tho of former defen industry facilities. In collaboration with foreign partners they t up joint ventures for producing medical equipment.
Analysis of the updating of the various groups of medical equipment is of substantial
interest.
It is en from Table 1 that detoxication devices contribute dominantly to the group of items that have been updated within the standard period of up to 5 years (100% of production, including modern devices for hemodialysis and hemosorption).
Comparatively high updating indices are obrved for devices for functional diagnosis: 72% of the devices have been produced for no longer than 5 years, and obsolete devices account for only 9% of total production. However, it should be noted that although production of some obsolete devices has been terminated, equipment of similar functional capacity is still urgently needed.
Relatively low updating indices are obrved among the devices for intensive care and resuscitation: 16% of new items and comparatively many obsolete devices (26%). Among new models apparatu
s for artificial lung ventilation are worth mention. However, some apparatus, which have been developed long ago are still on the market becau they have good performance, are quite reliable, and still are in demand. This reduces the updating index of the group as a whole.
All-Russian Scientific-Rearch Institute for Medical Instrument Engineering, Rusaian Academy of Medical Sciences (VNIIMP-VITA Joint-Stock Company), Moscow. Translated from Meditsinskaya Tekhnika, No. 1, pp. 4-9, January-February, 1996. Original article submitted August 23, 1995.
0006-3398/96/3001-0001515.00 y Plenum Publishing Corporation
TABLE 1. Updating of Basic Groups of Medical Devices and Apparatus (% of total nomenclature)
这里有个表
黄芪作用The lowest updating indices are obrved for devices for examining a patient's body structures. The are: ophthalmological, otolaryngological, and anthropometric devices, endoscopes, etc. The share of obsolete devices is high (44%), while the devices which have been produced for no more than 5 years account for only 20% of total production.
It should be noted that the results on medical equipment updating are important general estimates,
although they do not take into consideration specific achievements and shortcomings in the production of individual items. Therefore, some corresponding amendments are required.
Our survey of available information, including the VNIIMP-VITA Joint-Stock Company data bank, materials prented at various exhibitions, and recent literature, shows that domestic medical industry has developed a number of original medical devices and apparatus which were designed to replace similar obsolete models. However, many types of important and necessary medical devices still do not meet contemporary requirements, and some types of devices are not produced at all.
For example, in recent years production of some sophisticated medical devices (apparatus for intensive care, resuscitation, and anesthesiology; devices for artificial lung ventilation, respiratory narcosis devices, extracorporeal circulation) significantly ro, particularly at the former defen industry facilities, and their quality has been significantly improved. The functional performance of the devices is generally on par with foreign analogs.
Perfusion units have also been improved and their production has expanded. This allowed the demand of the health rvice organizations for such equipment to be satisfied completely. Modern domestic hemodialysis devices (Renart-10, Renan- 10RT, etc.) have been
developed and brought into wide clinical practice.
The development and production of diagnostic magnetic resonance imaging systems (Obraz-3, TOROS) are considerable breakthroughs in domestic medical industry. This substantially extends diagnostic capacities of many health rvice organizations and provides them with topical diagnosis previously unavailable domestically, although it is quite common in developed foreign countries.
柳永望海潮原文Domestic medical industry has begun production of pul oximeters; the are of particular u in surgery and resuscita-
tion. This bridged a substantial gap in the spectrum of available domestic medical devices.
The Bilitest bilirubin meter, which has been recently developed and produced in Russia, fully meets the requirements of maternity and children's hospitals in devices for diagnosing jaundice.
A high-standard radioimmunochemical laboratory was opened at the VNIIMP-VITA Joint-Stock Company to supply customers with necessary radioimmunochemical assay kits.
A number of high-quality medical devices and instruments have been developed at the electronic industry plants and
institutes. The following devices are particularly worthy of mention:
- artificial cardiac valves of the Emitron Plant, which are on par with the best foreign analogs;
- pH meters (Istok State Scientific-Manufacturing Association);旅游婚纱
- Ikar long-term (up to 24 h) cardiomonitors with electronic memory (Kometa Central Scientific-Manufacturing Association);
- radiothermographs and racliothermoscopes for detecting deeply located thermal fields in the human body (Oktyabr' Manufacturing Association and Design Bureau for Ecological and Medical Equipment);
- original thermal imaging system (Institute of Radioelectronics and Automatics, Russian Academy of Sciences; OPTROS, Ltd.);
- original computer-assisted system Cardiac Rhythms for monitoring oatient condition and pulsimetry (Institute of Chemical Physics, Russian Academy of Sciences; Ekos, Ltd.);
- video system for endoscopic imaging (Zenit Scientific-Manufacturing A~sociation; Elektron Scientific-Rearch and Manufacturing Association);
- streamlined technology for producing disposable and reusable syringes, injection needles, and surgical threads.
A number of other problems of domestic medical instrument-making industry have been successfully solved in recent years.
For example, the number and quality of therapeutic devices, particularly for lar therapy, is quite sufficient. Rearch studies are carried out by many organizations including former defen industry facilities. Technologies which have been developed for other purpos give fruitful results in medical industry.
According to our data, more than 150 models of such medical devices have been developed over the last 5 years. Some 100 of them are commercially available. Although domestic medical devices are often superior ot foreign analogs in terms of working performance and they are definitely less expensive, many of them are not in short demand and are virtually not ud.
However, this activity in many other areas of medical instrument engineering cannot be
considered as sufficiently successful and rational.
It should be noted that many newly developed models of domestic medical devices compare unfavorably with foreign analogs. This is particularly the ca for X-ray and ultrasonic devices, electrocardiographic monitors, laboratory equipment, etc. Nevertheless, according to the VNIIMP-VITA Joint-Stock Company databank, certain positive trends have been obrved in recent years even in the areas. However, most problems still remain unttled and the conditions required to solve them have not yet been established.
It is important to note that the rially produced X-ray apparatus RUM-20 (Mosrentgen Joint-Stock Company) has been significantly updated. The updated model RUM-20M-SG312 is commercially available in combination with the Sapfir domestic image intensifier or an image intensifier of a French manufacturer. The Kruiz fiat image intensifier has been developed at the
All-Russian Scientific-Rearch Institute for Medical Instrument Engineering in collaboration with MELZ Manufacturing Association and Mosrentgen Joint-Stock Company. This device is designed to replace existing fluorescent screens in the X-ray diagnostic apparatus RUM-10, RUM-20, RUM-20M, and others. The u of the Kruiz image intensifier significantly increas image information content and allows threefold decrea in the radiation load on patients and medical personnel.
The G 202-5 system for lit-par-lit raster imaging of patients in lying position has been developed at the Mosrentgen Joint-Stock Company. This device is commercially available with the PURS power source. It allows both manual and automatic X-ray photography and organ-oriented X-ray examination.
照相The RTS-61 mobile X-ray video diagnostic apparatus has been developed at the Elektron Scientific-Rearch and Manufacturing Association. This device is designed to be ud in surgery, orthopedics, and traumatology.
Among the defen industry facilities which have reoriented their production to medical market the Scientific-Rearch Institute for Electromechanics (Istra) is worth mention. In collaboration with Phillips (Germany) and borrowing their technology and circuitry, the Institute for Electromechanics developed the Mammodiagnost mammographic scanner, which meets international standards of operating performance.
The Rentgen-48 X-ray tomographic diagnostic systems with a rotary support table and the Rentgen-60 X-ray diagnostic systems with a remote control support table have been developed at the Sevkavrentgen Plant and received positive recognition by practicing physicians.
The models of X-ray diagnostic devices listed above are examples of achievements of domestic medical industry.
However, many important and significant problems of the development of domestic medical X-ray equipment remain unttled, and it is unreasonable to expect that they will be solved in the foreeable future unless special measures are taken.
For example, the most common RUM-20 X-ray apparatus with the Sapfir image intensifier are equipped with the obsolete X-ray image converter REP-1. To replace the REP-1 image converter, the Moscow Plant for Electronic Tubes has developed the Buer image converter of improved design. This device offers better image contrast, reduced clark background noi, and has an output fiberoptic window of improved design. However, the Buer image converter is not yet commercially available.
Digital X-ray diagnostic devices are not yet commercially available from domestic
manufacturers either.
The Design Bureau for Medical Engineering in collaboration with Medtekh, Ltd. (Novosibirsk) have d
eveloped the Diaskan X-ray digital scanner. Serial production of this device is in progress at the Design Bureau for Medical Engineering.
However, devices of sufficient quality are not yet commercially available.
Domestic medical industry does not produce X-ray tomographs. Their production in Chelyabinsk has been suspended.
Electrocardiographic monitors are very important devices for functional diagnosis. However, domestic medical industry fails substantially behind leading foreign manufacturers and there is a disproportion in the development and production of necessary devices and apparatus. Many automatic systems for ECG processing, including syndromal diagnosis, have been developed, but they trove not been tested and are of little demand. However, simple three-channel electrocardiographs of mass- scale application are not produced by domestic manufacturers.
Foreign manufacturers offer various ultrasonic scanners and sophisticated imaging systems. Domestic manufacturers produce only simple devices with manual ctor-by-ctor scanning and a few simplified models with linear electronic scanning.
颜色的颜组词
Some positive results have been achieved in the development of endoscopic devices. The achievements are mainly due to the collaboration between LOMO and some companies from Japan. However, even the devices require further improvement of quality and reliability.
Although the level of production of domestic laboratory equipment has noticeably rin in recent years, it is still too little to meet the demand. The number of organizations involved in the development of such equipment has rin. However, the available devices are simple and have limited functional capacity. Many important devices (e.g., automatic analyzers and simple routine devices) are not produced at all.
Devices for blood transfusion and preparing blood substitute solutions are still in short supply (40 million items have been produced, while the demand is 200 million). The demand in dialyzers and polymer infusion systems reaches 100 and 150 million items, respectively, although such systems are not produced at all.
The correspondence between production and demand, quality and technical performance, and adequate testing of medical production are put in the forefront under conditions of a market economy. The problem of competition with foreign manufacturers is also quite important becau of i
ncreasing import of medical equipment and reduced sale of the production of domestic manufacturers. In this connection, the following circumstances should be taken into consideration.
There is a considerable disproportion between production and demand of some groups of medical devices. For example, there is :~ huge surplus of lar therapeutic devices and their excessive development. Systems for syndromal electrocardiographic diagnosis, magnetotherapy, and electrostimulation are also in excessive supply. However, simple electrocardiographs, routine laboratory equipment, and some other ordinary but necessary devices of mass-scale application are not produced by domestic manufacturers. The disadvantages cau significant economic loss and prent difficulties in the development of health rvice. Domestic and foreign experience show that the problems can be solved by adequate marketing, but this is in its infancy in the domestic medical industry.
It should be noted that foreign companies place special emphasis on marketing and market rearch. They evaluate actual and pending demand as well as consumer requirements. The