引用 英文 翻译图纸中的英语
ALL WELDS CONTINUOUS UNLESS OTHERWISE STATED. 未注焊缝均为连续焊
ALL WELDS 3mm FILLET UNLESS OTHERWISE STATED 未注焊角高2013高考数学试卷及答案3mm.
ALL UNSPECIFIED RADI - R3 未注圆角R3
REMOVE ALL BURRS AND SHARP EDGES 棱角倒钝
CHANNEL oct槽钢
RSA 708 角钢 70X70X8
totoroM30X1.5 pitch M30X1.5的锥螺纹
Tackweld 点焊
OD 1/4" outside dimension 1/4"的缩写 外径直1/4"
75 CRS 尺寸为75 材质为冷轧钢板
410 OPENING REF 410 开口参考尺寸
40 REF 尺寸为40,参考值
2.5" BSP 2.5” 圆锥管螺纹
2.5" BSPT HEXAGON 2.5” 六角圆锥管螺纹(即对丝)
30x2.5 FLAT BAR 30X2.5 扁钢
TYP 2 POSNS 2处
11 TOTAL COILS APROX.9 WORKING COILS APROX.RIGHT HAND WOUND ONLY,END COILS SQUARE TO TOUCH.
总圈数约11圈；工作圈数约9圈；右旋；弹簧的端部磨平以便于接触.(此为弹簧技术说明)
FEMALE: 内扣brunt(母扣)
MALE: 外扣forrest gump(公扣)
偏心轴 eccentric shaft
销轴 PIN
开口销son of bitch COTTER PIN
螺杆 screw
紧定螺钉 SET SCREW
圆螺母 ROUND NUT
内六角螺钉 SOCKET HEAD CAP SCREW
六角螺钉职称英语考试准考证打印 HEX HD SETSCREW
六角螺栓 HEX HD BOLT
挡圈 closing ring
弹性挡圈 circlip
轴承隔套 distance sleeve of axletree
轴承 axletree
深沟球轴承 DEEP GROOVE BALL BEARING
无扣长 non-buckle longth
弹簧 SPRING
吊环螺钉calculator LIFTING EYE BOLT
开槽盘头螺钉 SLOTTED PAN HEAD SCREW
圆锥滚子轴承 TAPERED ROLLER BEARING
推力球轴承THRUST BALL BEARING
平键 FLAT KEY
弹簧垫圈 SINGLE COIL SPRING WASHER
平垫圈 FLAT WASHER
螺母 FULL NYLOCK NUT
圆螺母 ROUND NUTrender
