deeplinkCopley Camming Ur Guide
P/N 95-00501-000
Revision 2
rheaJune 2008
Copley Camming Ur Guide
mali
.
TABLE OF CONTENTS
About This Manual (5)
1:Operational Overview (7)
1.1: Host System Requirements (8)
1.2: Camming Operation (9)
1.3: Monitoring Camming Moves (10)
2:Camming Setup (11)
2.1: Start CME 2 (12)
2.2: Configure CME 2 Basic Setup for Camming Mode (13)
2.3: Configure Camming Parameters (14)
2.4: Load the Cam Tables (16)
3:Cam Tables (17)
3.1: Cam Table Specifications and Guidelines (18)
3.2: Overview of the Tables Tab (20)
3.3: Cam Table Procedures (22)
4:Application and Connection Examples (25)
4.1: Conveyer Camming Application Example (26)
4.2: Connection Examples (27)
5:Camming Configuration via ASCII (31)miai
5.1: Camming Mode Variables (32)
玛丽外宿中电视剧
6:Camming Control via Indexer Program (35)
6.1: Indexer Camming Function (36)留学签证
6.2: Camming Internal Master Function (37)
Table of Contents Copley Camming Ur Guide
A BOUT T HIS M ANUAL
Overview and Scope
This manual describes the u of the Copley Controls Camming feature, and its tup through Copley Controls CME 2 amplifier commissioning software. Thus, this book is intended to be ud as an addendum to the CME 2 Ur Guide.
It is assumed that before the Camming feature is configured and operated, the amplifier will have been t up and tuned using CME 2 software.
Related Documentation
Documents of related interest include:
•CME 2 Ur Guide (describes the u of CME 2 amplifier commissioning software to t up and tune the amplifier)
overwrite•Copley Indexer Program Ur Guide (describes u of Indexer Program to create motion control quences)
•Copley ASCII Interface Programmer’s Guide (describes how to nd ASCII format commands over an RS232 rial bus to t up and control one or more amplifiers). •Copley Amplifier Parameter Dictionary (describes all Copley Controls amplifier parameters)
Links to the publications, along with hardware manuals and data sheets, can be found under the Documents heading of
六级考试时间2014
Copley Controls software and related information can be found on:
Comments
Copley Controls Corporation welcomes your comments on this manual. See
< for contact information.foundout
Copyrights
No part of this document may be reproduced in any form or by any means, electronic or mechanical, including photocopying, without express written permission of Copley Controls Corporation.
Xenus, Accelnet, Stepnet, Accelus, and Junus are registered trademarks of Copley Controls Corporation.
CME 2 is a registered trademark of Copley Controls Corporation.
Windows NT, 2000, XP, and Vista are trademarks or registered trademarks of the Microsoft Corporation.
ielts报名费Document Validity
We rerve the right to modify our products. The information in this document is subject to change without notice and does not reprent a commitment by Copley Controls Corporation. Copley Controls Corporation assumes no responsibility for any errors that may appear in this document.
