HOW TO ORDER
Technical Data:
All technical data relate to an ambient temperature of +25°C Capacitance Range:0.1 µF to 2200 µF Capacitance Tolerance:±10%; ±20%
Rated Voltage (V R )Յ+85°C: 2.54 6.3101620253550Category Voltage (V C )
Յ+125°C: 1.7 2.7 4 71013172333Surge Voltage (V S )Յ+85°C: 3.3 5.28132026324665Surge Voltage (V S )Յ+125°C: 2.2 3.45813162028
guangzhou fair
40
Temperature Range:-55°C to +125°C
Reliability:1% per 1000 hours at 85°C, V R with 0.1Ω/V ries impedance, 60% confidence level
Qualification:
CECC 30801 - 005 issue 2
考研报名费多少钱
TECHNICAL SPECIFICATIONS
CASE DIMENSIONS:millimeters (inches)
For part marking e page 122
TAJ
Type
C
加减乘除日语
Ca Size See table above
bogan106
Capacitance Code pF code: 1st two digits reprent significant figures 3rd digit reprents multiplier (number of zeros to follow)
M
T olerance K=±10%M=±20%
035
Rated DC Voltage
002=2.5Vdc 004=4Vdc 006=6.3Vdc 010=10Vdc 016=16Vdc 020=20Vdc 025=25Vdc 035=35Vdc 050=50Vdc
R
世界大学排名Packaging R = 7" T/R (Lead Free since p roduction date 1/1/04)
S = 13" T/R
(Lead Free since p roduction date 1/1/04)
皮肤粗糙干燥怎么办A = Gold Plating 7" Reel
B = Gold Plating 13" Reel H = Tin Lead 7" Reel K = Tin Lead 13" Reel
NJ
Additional
characters may be added for special requirements
• Generic SMT chip tantalum ries • 5 key ca sizes available • Low profile options available
COMPONENT
世界名著小说CAPACITANCE AND RATED VOLTAGE, V R(VOLTAGE CODE) RANGE (LETTER DENOTES CASE SIZE)
Non preferred Ratings - not recommended for new designs,
higher voltage or smaller ca size substitution are offered.
Engineering samples - plea contact manufacturer
*Codes under development - subject to change.
metzRelead codes (M tolerance only)
Note: Voltage ratings are minimum values. AVX rerves the right to supply
higher ratings in the same ca size, to the same reliability standards.
RATINGS & PART NUMBER REFERENCE
Engineering samples - plea contact manufacturer
All technical data relates to an ambient temperature of +25°C. Capacitance and DF are measured at 120Hz, 0.5V RMS with a maximum DC bias of 2.2 volts. DCL is measured at rated voltage after 5 minutes.
TAJ ries is MSL level 1 according to J-STD-020C.
适合中学生看的电影*Inrt K for ±10% and M for ±20%#Standard Plating– Inrt R for 7" reel and S for 13" reel NOTE: AVX rerves the right to supply a
doms
RATINGS & PART NUMBER REFERENCE
Engineering samples - plea contact manufacturer
All technical data relates to an ambient temperature of +25°C. Capacitance and DF are measured at 120Hz, 0.5V RMS with a maximum DC bias of 2.2 volts. DCL is measured at rated voltage after 5 minutes.
TAJ ries is MSL level 1 according to J-STD-020C.
*Inrt K for ±10% and M for ±20%#Standard Plating– Inrt R for 7" reel and S for 13" reel NOTE: AVX rerves the right to supply a
RATINGS & PART NUMBER REFERENCE
Engineering samples - plea contact manufacturer
All technical data relates to an ambient temperature of +25°C. Capacitance and DF are measured at 120Hz, 0.5V RMS with a maximum DC bias of 2.2 volts. DCL is measured at rated voltage after 5 minutes.
TAJ ries is MSL level 1 according to J-STD-020C.
*Inrt K for ±10% and M for ±20%#Standard Plating– Inrt R for 7" reel and S for 13" reel Capacitance Tolerance# Gold Plating – Inrt A for 7" reel and B for 13" reel
# Tin Lead Plating – Inrt H for 7" reel and K for 13" reel NOTE: AVX rerves the right to supply a higher voltage rating or tighter tol-
erance part in the same ca size,
to the same reliability standards.
