ICS 29.120.30
ISBN 0-626-17837-1
SANS 164-1:2006
Edition 5
SOUTH AFRICAN NATIONAL STANDARD
Plug and socket-outlet systems for houhold and similar purpos for u in South Africa
Part 1: Conventional system, 16 A 250
Published by Standards South Africa
1 dr lategan road groenkloof private bag x191 pretoria 0001 tel: 01
幸福其实很简单2 428 7911 fax: 012 344 1568 international code + 27 12 a
© Standards South Africa
SANS 164-1:2006
Edition 5
Table of changes
Change No.Date Scope
管理员英文
Abstract
Covers the rating and dimensions of the conventional 16 A 250 plug and socket-outlet system and socket-outlet adaptors for houhold and similar purpos, for u in South Africa. Keywords
英汉翻译器adaptors, dimensions, electric plugs, electric sockets, socket-outlets.
Foreword
This South African standard was approved by National Committee StanSA SC 67C, Electricity distribution systems and components – Electrical accessories, in accordance with procedures of Standards South Africa, in compliance with annex 3 of the WTO/TBT agreement.
darlington
This edition cancels and replaces edition 4 (SABS 164-1:1997).
safetyfirst
This part of SANS 164, by reference in SANS 164-0, forms part of the compulsory specification for plugs, socket-outlets and socket-outlet adaptors, as published by Government Notice No. R442 (Government Gazette 18779) of 3 April 1998. Compliance with the dimensions of this part of SANS 164 will be deemed to be compliance with the said compulsory specification.
SANS 164 consists of the following parts, under the general title Plug and socket-outlet systems for houhold and similar purpos for u in South Africa:
Part 0: General and safety requirements.
艾美奖2013
Part 1: Conventional system, 16 A 250
Part 2: IEC system, 16 A 250
Part 3: Conventional system, 6 A 250
Part 4: Dedicated system, 16 A 250
Part 5: Flat non-rewirable two-pole plugs, 2,5 A 250 V, with cord, for connection of class II equipment.
Part 6: Round two-pole system, 10 A 250 and 16 A 250 , for connection of class II equipment.
Annexes A, B, C, D, E and F form an integral part of this part of SANS 164.
SANS 164-1:2006
Edition 5
1
Contents
Page
Abstract
Keywords
Foreword
1 Scope (3)
2 Normative reference (3)
3 Definitions (3)
4 Requirements (3)
Annex A (normative) Gauge for the distance from the engagement face to the current- carrying contact tubes of socket-outlets (6)
Annex B (normative) Gauge for the distance from the engagement face to the point of first contact with the current-carrying contacts of socket-outlets (no contact gauge) (7)
Annex C (normative) Gauge for the distance from the engagement face to the point of first contact with the current-carrying contacts of socket- outlets (contact gauge) (8)
Annex D (normative) Gauge for proving that it is not possible to make connection between a pin of a plug and a current-carrying contact of a socket-outlet while any other current-carrying pin is accessible (9)
Annex E (normative) Gauge for proving that, during inrtion of a plug, the earth pin makes connection before either of the current-carrying pins, and that, during plug withdrawal, both current-carrying pins break connection before the earth pin (10)
Annex F (normative) "GO" gauges for plugs and socket-outlets (11)
Bibliography (13)
SANS 164-1:2006
Edition 5
This page is intentionally left blank 2
SANS 164-1:2006
Edition 5 Plug and socket-outlet systems for houhold and similar purpos for
heal the worldu in South Africa
forget的过去式Part 1:
Conventional system, 16 A 250
1 Scope
benevolence
This part of SANS 164 covers the rating and dimensions of the conventional 16 A 250 plug and socket-outlet system and socket-outlet adaptors for houhold and similar purpos, for u in South Africa.
2 Normative reference
The following standard contains provisions which, through reference in this text, constitutes provisions of this part of SANS 164. All standards are subject to revision and, since any reference to a standard is deemed to be a reference to the latest edition of that standard, parties to agreements bad on this part of SANS 164 are encouraged to take steps to ensure the u of the most recent edition of the standard indicated below. Information on currently valid national and international standards can be obtained from Standards South Africa.
SANS 164-0, Plug and socket-outles systems for houhold and similar purpos for u in South Africa – Part 0: General and safety requirements.
3 Definitions
For the purpos of this part of SANS 164, the definitions given in SANS 164-0 apply.
4 Requirements
4.1 The requirements of SANS 164-0 apply.
4.2Socket-outlets, socket-outlet adaptors and rewirable plugs shall be rated at 16 A and 250
4.3 Plugs and socket-outlets shall comply with the dimensions given on the appropriate of standard sheets 1-1 or 1-2.心疼的英文
U the gauges given in annexes A to F for checking the dimensions.
3
