HIGH PRESSURE CLEANER
DW-095IV-1authority
IMPORTANT
1.Read the instructions carefully and familiarize yourlf with procedure before asmbling
yingtianthe unit.
2.Check that you have all the component parts following the list on the back cover and
familiarize yourlf with each part before proceeding.
3.Take all the fittings out of the plastic bag and parate them into their groups.
4.Ensure you have enough space to lay all the parts before asmbly.
5.To avoid scratching, it is recommended that you asmble the unit on a soft level surface.
WARNING: READ THE INSTRUCTION CAREFULLY BEFORE OPERATION
SAFETY INSTRUCTION
•When using the high pressure cleaner, always obrve the detailed safety instructions enclod.
•We recommend the ur wear safety equipment during u.
•Plea read all instructions before u.
WARNING
DO NOT u your high pressure cleaner without reading the safety instruction manual.
-This unit must not be ud by children or untrained personnel.
-When activating the high pressure of the water coming out of the lance may cau kick back. Therefore when activating, ensure that you grip the lance firmly. When using this unit ensure that other people are at least 10m away from the working area.
-High pressure cleaner can be dangerous if misud. The high pressure gun must not be directed at other people, animal, live electrical equipment or the high pressure cleaner itlf.void是什么意思
-DO NOT point the high pressure gun towards yourlf or other people.
If an extension cord is ud, it must be of waterproof construction.
-To ensure safe operation of the high pressure cleaner u only original spare parts or spare parts recommended by the manufacturer.
-DO NOT u the high pressure cleaner if the supply cord or other important parts are damaged (e.g. high pressure ho or the lance).
-Keep the high pressure ho connected to the pressure cleaner as long as the pressure cleaner is under pressure. Disconnecting the high pressure ho whilst the system is under pressure is dangerous.
-DO NOT u any acid or flammable liquid in the machine.
It is highly recommended that this product be ud with and RCD (Residual Current Device). -When using a high pressure cleaner always ensure that your water connection is protected by a “ Backflow Preventer” (as per Water Byelaws). This will avoid any possible contamination of your water supply.
ELECTRICAL SAFETY
Always check that the power supply corresponds to the voltage on the rating plate. Preferably connect the machine to an electric group who is protected with an earth leakage switch of max.四级成绩查询网址
30 mA.
KNOW YOUR MACHINE
PRODUCT DATA
VOLTAGE 230V~240V/50Hz
POWER 1800W
RATED PRESSURE 100bar
MAX PRESSURE 150bar
FLOW RATE 6.0L/min
PROTECT CLASS IPX5
WATER TEMPERATURE 0-40℃
MOTOR TYPE Induction Description/ The list
Note: Your high pressure cleaner has been designed for outdoor u only for the cleaning of stone, wood, metal and plastic materials.
cove
1．INLET
2．OUTLET
3．SWITCH
4．DETERGENT TANK
5．WATER FILTER (INSIDE THE MACHINE)
6．MALE HOSE CONNECTOR
7．GUN HOLDER
8．GUN HOLDER
9．NEEDLE
10．NORMAL LANCE
11．TRIGGER GUN
12．HIGH PRSSURE OUTLET HOSE
OPERATION INSTRUCTION-ASSSEBLYvictor lau
ATTENTION
Before carrying out any asmbly or disasmbly of the unit plea ensure that the unit is not connected to the electrical supply.
Asmbling the high pressure cleaner machine
1.cut the soft ho.
3.fix uite body and detergent by screws.
4.fix storage brackets to unit body by screws.
5.High pressure washer ho
A. Connect the high pressure ho to the outlet., e picture 1.管鲍之交翻译
B. Connect the high pressure ho to trigger handle, u spanner to tighten the connection (but do not over tighten). See picture 2.urgent
Picture 2
许多英语6. Asmbling the lance and trigger handle
金融数学专业A. Connect the lance and trigger handle by screwing the connection. This asmbly must
be carried out prior to using the high pressure cleaner. See picture 3.
B. Always remove or replace parts whilst the high pressure cleaner is switched off.
Picture3 CAUTION
Ensure that both parts are firmly connected together otherwi may cau a breakage and a hazard.
7. Connecting the water supply
A. Screw the threaded male ho connector onto the water supply connector. Ensure that the
connector is firmly fastened (but do not over tighten). See picture 4
B. Connect the female connector of your garden ho (the garden ho and female connector
not included in the package) onto the male connector of your high pressure cleaner. See picture 4
. Picture 4
Note: The minimum length of supply ho (not included) advid for maximum ur convenience is 6 meters with a diameter of 12.5mm(1/2”) to avoid back pressure and any associated potential damage to your high pressure cleaner.
