CYLINDER 油缸
DIV.SPARE PARTS SEGMENTFEEDER 待定管片喂送器备件
SEGMENTCRANE 管片吊机
GEAR MOTOR 齿轮马达
DRIVE MOTOR 驱动马达
SPARE PART PACK SEGMENT CRANE 管片吊机备件包
DIV.SPARE PARTS 待定备件
DIV.SPARE PARTS ERECTORPULT 待定拼装机备件拼装机控制面板
SCREW TENSION CYLINDER M42 M42螺栓拉伸油缸
SCREW TIGHTENING DEVICE M60 M60螺栓上进装置
HIGH PRESSURE POWER PACK 高压动力包
HIGH-PRESSURE HOSE 高压油管repeat y
HIGH PRESSURE HOSE 1600Bar高压油缸
HIGH POWER AGGREGATE G20 G20高压泵站
HIGH PRESSURE HOSE 高压油管
INSERT FOR SCREW DRIVER SW 65 SW65套筒
INSERT FOR SCREW DRIVER SW 55 SW55套筒
POWER SCREW DRIVER HYDRAULIC 液压动力扳手
DISPLACEMENT CYLINDER + AGGREGAT 移位油缸updatedata+液压泵站
TOOL BOX 工具箱
CABLE SHEARS 电缆剪
SCREW DRIVER 螺丝刀
SOCKET WRENCH SET 12K 12K套筒扳手装置
DRILLING MACHINE 钻机
GAS SOLDERING IRON SET 气体烙铁
TIN 锡罐
KALIBRATION DEVICE 校准装置
MULTIMETER 万用表
PLIERS 钳子
TORCH 手电筒
TWIST DRILL 螺旋钻
INDICATION 指示器
FAN 风扇
TORQUE WRENCH 扭矩扳手
COAL DRILL 煤钻
GRINDER 电砂轮
Segment data: 管片参数:
Outside diameter: 15,000mm 外径: 15,000mm
Inside diameter 13,700mm 内径: 13,700mm
Length 2,000mm 宽度: 2,000mm
Ring distribution: 9+1 管片分布: 9+1
MIX shield with back-up system 混合式盾构机及后配套系统
Shield body 盾体
gmental steel structure (front and rear shields) 钢结构块 (前盾和后盾)
pressure wall 压力壁
submerged wall (air bubble chamber) 分隔板 (气泡调压舱)
pressure nsors 土压传感器
Access door in the pressure wall 压力舱壁中的进入门
我愿意 i doAccess door in the submerged wall 分隔板中的进入门
flange manlock 人闸法兰
lange for material lock 材料闸法兰
main drive support 主驱动支架
agitators ? 1,900mm 搅拌器? 1,900mm
front gate 前闸门
protection grid 保护隔条
ethereal
Flushing circuit in the excavation chamber 开挖舱内的冲洗回路
19 x triple thrust cylinders 19 x 3ccic个推进油缸教育部雅思报名
Injection points 2” for shield lubrication 2”盾体润滑注入点
Tailskin 盾尾
sandwich type steel structure 夹层“三明治”式钢结构
rows of wire brush al 排密封钢丝刷
emergency al system boxing day是什么意思紧急密封系统
injection pipes for tailskin grea per grea chamber 每个油脂舱盾尾注脂管
single grout injection channels for mortar 单液砂浆注入管道
Grout and grea pipes are integrated in the tailskin steel structure 注浆管和注脂管集成在盾尾钢结构里
Cutting wheel 刀盘
spokes star design 星形轮辐设计
centre cone to connect the cutting wheel the main drive unit 中心锥用于连接刀盘和主驱动单元
with man access to change the tools from within the arms 有人员通道，可以从刀盘臂内进入进行换刀
First dress of cutting tools including exchangeable cutting tools, standard cutting tools and standard bucket lips, adelaide初装刀，包括可更换刀具、标准切刀和标准铲刀
copy cutter, 仿型刀
Center flushing circuit equipment 中心冲刷设备
rotary unit DN150mm for bentonite 膨润土旋转单元DN150mm
standard scrapers equipped with wear detection equipment 标准刮刀，带磨损监测装置
bucket lips equipped with wear detection equipment 铲刀，带磨损监测装置
Main drive including main bearing ? 8m and lubrication system 主驱动，包括主轴承? 8m 和润滑系统
Inner and outer aling system 内外密封系统
Main bearing ? 8,000mm 主轴承? 8,000mm
Electric motor 250kW with safe t 电机250kW，带安全单元
Planetary gear box 行星齿轮箱
Frequency drive units 变频驱动单元
Installed power 3,500kW 安装功率英语四级准考证号忘了怎么办3,500kW
Segment erector 管片安装机
Erector beam 安装机梁
Ba frame 基架
Rotation frame with telescope 伸缩旋转架
Traver with erector head 横梁及安装机头
Lift for ring building 管片安装升降系统
Erector bearing 安装机轴承
remote control (radio) 遥控设备（无线和线控）
auxiliary crane for installation of the auxiliary invert gment 辅助吊机，用于安装辅助仰拱块
counter weight 平衡块
Vacuum gripping device incl. vacuum pump 真空抓取系统，包括真空泵
Man lock incl. each 人闸，每个包括
Steelwork 钢架
Double chamber 两个舱体
origin是什么
According to DIN EN 12110 依据DIN EN 12110
Pipes and installations 管道和安装设施
air lock is equipped with flange 空气闸，有法兰盘
