AWS A1.1 | Metric Practice Guide for the Welding Industry焊接中的国际单位指南 |
AWS A2.4 | Standard Symbols for Welding, Brazing, and Nondestructive Examination焊接，钎焊，无损检测的标准符号 |
AWS A3.0 | Standard Welding Terms and Definitions Including Terms for Brazing, Soldering Thermal Spraying and Thermal Cutting焊接，钎焊，热喷涂，热切割的标准术语 |
AWS A4.2M/A4.2 | Standard Procedures for Calibrating Magnetic Instruments to Measure the Delta Ferrite Content of Austenitic and Duplex Ferritic-Austenitic Stainless Steel Weld Metal |
AWS A4.3 | Standard Methods for Determination of the Diffusible Hydrogen Content of Martensitic, Bainitic, and Ferritic Steel Weld Metal Produced by Arc Welding 马氏体，贝氏体，珠光体钢的电弧焊缝的扩散氢测定标准 |
AWS A4.4M | Standard Procedures for Determination of Moisture Content of Welding Fluxes and Welding Electrode Flux Coverings钎剂和焊条的水分测定标准 |
AWS A5.01 | Filler Metal Procurement Guidelines焊接材料的采购指导 |
AWS A5.1 | Specification for Carbon Steel Electrodes for Shielded Metal Arc Welding碳素钢电弧焊规范 |
AWS A5.10/A5.10M | Specification for Bare Aluminum and Aluminum-Alloy Welding Electrodes and Rods铝及铝合金的焊条及焊丝规范 |
AWS A5.11/A5.11M | Specification for Nickel and Nickel-Alloy Welding Electrodes for Shielded Metal Arc Welding镍及镍合金的 |
AWS A5.12/A5.12M | Specification for Tungsten and Tungsten-Alloy Electrodes for Arc Welding and Cutting电弧焊及切割的钨及乌合金电极标准 |
AWS A5.13 | Specification for Solid Surfacing Welding Rods and Electrodes R(1989) 表面堆焊的焊丝及焊条标准 |
AWS A5.14/A5.14M | Specification for Nickel and Nickel-Alloy Bare Welding Electrodes and Rods 镍及镍合金的焊条及焊丝标准 |
AWS A5.15 | Specification for Welding Electrodes and Rods for Cast Iron 铸铁的焊条及焊丝标准 |
AWS A5.16 | Specification for Titanium and Titanium Alloy Welding Electrodes and Rods 钛及钛合金的焊丝及焊条标准 |
AWS A5.17/A5.17M | Specification for Carbon Steel Electrodes and Fluxes for Submerged Arc Welding 碳钢的埋弧焊的焊丝及焊剂标准 |
AWS A5.18 | Specification for Carbon Steel Electrodes and Rods for Gas Shielded Arc Welding 碳钢的气体保护焊的焊丝标准 |
AWS A5.19 | Specification for Magnesium Alloy Welding Electrodes and Rods 镁合金的焊丝及焊条标准 |
AWS A5.2 | Specification for Carbon and Low Alloy Steel Rods for Oxyfuel Gas Welding 碳钢及低合金钢的气焊标准 |
AWS A5.20 | Specification for Carbon Steel Electrodes for Flux Cored Arc Welding 碳钢药芯焊丝标准 |
AWS A5.21 | Specification for Composite Surfacing Welding Rods and Electrodes R(1989) 复合钢板的焊丝及焊条标准 |
AWS A5.22 | Specification for Stainless Steel Electrodes for Flux Cored Arc Welding and Stainless Steel Flux Cored Rods for Gas Tungsten Arc Welding |
AWS A5.23/A5.23M | Specification for Low Alloy Steel Electrodes and Fluxes for Submerged Arc Welding低合金钢埋弧焊的焊丝及焊剂标准 |
AWS A5.24 | Specification for Zirconium and Zirconium Alloy Welding Electrodes and Rods 锆及锆合金的焊条及焊丝标准 |
AWS A5.25/A5.25M | Specification for Carbon and Low-Alloy Steel Electrodes and Fluxes for Electroslag Welding 低碳低合金钢的电渣焊的焊丝及焊剂标准 |
AWS A5.26/A5.26M | Specification for Carbon and Low-Alloy Steel Electrodes and Electrogas Welding 低碳低合金钢的气电焊及焊丝标准 |
AWS A5.28 | Specification for Low-Alloy Steel Electrodes and Rods for Gas Shielded Arc Welding低合金钢的气体保护焊的焊丝标准 |
AWS A5.29 | Specification for Low-Alloy Steel Electrodes for Flux Cored Arc Welding 低合金钢的药芯焊丝标准 |
AWS A5.3/A5.3M | Specification for Aluminum and Aluminum-Alloy Electrodes for Shielded Metal Arc Welding 铝及铝合金的焊条电弧焊焊焊条标准 |
AWS A5.30 | Specification for Consumable Inrts可融入嵌块标准 |
AWS A5.31 | Specification for Fluxes for Brazing and Braze Welding 钎焊钎剂标准 |
AWS A5.32 | Specification for Welding Shielding Gas 焊接保护气标准 |
AWS A5.4 | Specification for Stainless Steel Electrodes for Shielded Metal Arc Welding 不锈钢手工电弧焊焊焊条标准 |
AWS A5.5 | Specification for Low-Alloy Steel Electrodes for Shielded Metal Arc Welding 低合金钢手工电弧焊焊条标准 |
AWS A5.6 | Specification for Covered Copper and Copper Alloy Arc Welding Electrodes R(1991) 表面堆焊铜及铜合金的焊条标准 |
AWS A5.7 | Specification for Copper and Copper Alloy Bare Welding Rods and Electrodes R(1991)表面堆焊铜及铜合金的焊丝标准 |
AWS A5.8 | Specification for Filler Metals for Brazing and Braze Welding 钎焊及硬钎焊的填充金属标准 |
AWS A5.9 | Specification for Bare Stainless Steel Welding Electrodes and Rods |
AWS A9.1 | Standard Guide for Describing Arc Welds in Computerized Material Property and Nondestructive Examination Databas |
AWS A9.2 | Standard Guide for Recording Arc Weld Material Property and Nondestructive Examination Data in Computerized Databas |
AWS API-IM | Code Clinic for Study of API Standard 1104 Eighteenth Edition Welding of Pipelines and Related Facilities - Instruction Manual |
AWS API-M | Code Clinic for Study of API Standard 1104 Eighteenth Edition Welding of Pipelines and Related Facilities - Reference Manual |
AWS AWN | Arc Welding and Cutting Noi |
AWS B1.10 | Guide for the Nondestructive Examination of Welds焊接无损检测指导 |
AWS B1.11 | Guide for the Visual Examination of Welds焊接目视检验指导 |
AWS B2.1 | Specification for Welding Procedure and Performance Qualification 焊接工艺及性能测试标准 |
AWS B2.1.001 | Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel, (M-1/P-1, Group 1 or 2), 3/16 Through 3/4 Inch, in the As-Welded Condition, with Backing标准碳钢焊条电弧焊的焊接工艺指导书，有衬垫。 |
AWS B2.1.002 | Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Carbon Steel, (M-1/P-1, Group 1 or 2), 3/16 Through 7/8 Inch, in the As-Welded Condition, with or without Backing |
AWS B2.1.003 | Standard Welding Procedure Specification (WPS) for Gas Metal Arc Welding of Galvanized Steel, 10 Through 18 Gage, in the As-Welded Condition, with or without Backing |
AWS B2.1.004 | Standard Welding Procedure Specification (WPS) for Gas Metal Arc Welding of Carbon Steel (M-1, Group 1), 10 Through 18 Gage, in the As-Welded Condition, with or without Backing |
AWS B2.1.005 | Standard Welding Procedure Specification (WPS) for Gas Metal Arc Welding of Austenitic Stainless Steel (M-8 or P-8), 10 Through 18 Gage, in the As-Welded Condition, with or without Backing |
AWS B2.1.006 | Standard Welding Procedure Specification (WPS) for Gas Metal Arc Welding of Carbon Steel to Austenitic Stainless Steel (M-1 to M-8 or P-8), 10 Through 18 Gage, in the As-Welded Condition, with or without Backing |
AWS B2.1.007 | Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Galvanized Steel, 10 Through 18 Gage, in the As-Welded Condition, with or without Backing |
AWS B2.1.008 | Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Carbon Steel (M-1, Group 1), 10 Through 18 Gage, in the As-Welded Condition, with or without Backing |
AWS B2.1.009 | Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Austenitic Stainless Steel (M-8 or P-8), 10 Through 18 Gage, in the As-Welded Condition, with or without Backing |
AWS B2.1.010 | Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Carbon Steel to Austenitic Stainless Steel (M-1 to M-8 or P-8), 10 Through 18 Gage, in the As-Welded Condition, with or without Backing |
AWS B2.1.011 | Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Galvanized Steel, 10 Through 18 Gauge, in the As-Welded Condition, with or without Backing |
AWS B2.1.012 | Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel, (M-1, Group 1), 10 Through 18 Gauge, in the As-Welded Condition, with or without Backing |
AWS B2.1.013 | Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Austenitic Stainless Steel, (M-8/P8) 10 Through 18 Gauge, in the As-Welded Condition, with or without Backing |
AWS B2.1.014 | Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel to Austenitic Stainless Steel, (M-1 to M-8 or P-8), 10 Through 18 Gauge, in the As-Welded Condition, with or without Backing |
AWS B2.1.015 | Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Aluminum, (M-22 or P-22), 10 Through 18 Gauge, in the As-Welded Condition, with or without Backing |
AWS B2.1-1-016 | Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, E7018, As-Welded or PWHT Condition |
AWS B2.1-1-017 | Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, E6010, As-Welded or PWHT Condition |
AWS B2.1-1-018 | Standard Welding Procedure Specification (WPS) for Self-Shielded Flux Cored Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, E71T-8, As-Welded Condition |
AWS B2.1-1-019 | Standard Welding Procedure Specification (WPS) for CO2 Shielded Flux Cored Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, E70T-1 and E71T-1, As-Welded Condition |
AWS B2.1-1-020 | Standard Welding Procedure Specification (WPS) for 75% Ar/25% CO2 Shielded Flux Cored Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, E70T-1 and E71T-1, As-Welded or PWHT Condition |
AWS B2.1-1-021 | Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding Followed by Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, ER70S-2 and E7018, As-Welded or PWHT Condition |
AWS B2.1-1-022 | Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, E6010 (Vertical Uphill) Followed by E7018, As-Welded or PWHT Condition |
AWS B2.1-1-026 | Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, E6010 (Vertical Downhill) Followed by E7018, As-Welded or PWHT Condition |
AWS B2.1-1-027 | Standard Welding Procedure Specification (WPS) for Self-Shielded Flux Cored Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 3/4 Inch Thick, E71T-11, As-Welded Condition |
AWS B2.1-1-201 | Standard Welding Procedure Specification (WPS) Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 3/4 Inch Thick, E6010 (Vertical Uphill) Followed by E7018 (Vertical Uphill), As-Welded Condition, Primarily Pipe Application |
AWS B2.1-1-202 | Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 3/4 Inch Thick, E6010 (Vertical Downhill) Followed by E7018 (Vertical Uphill), As-Welded Condition, Primarily Pipe Appli |
AWS B2.1-1-203 | Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 3/4 Inch Thick, E6010 (Vertical Uphill), As-Welded Condition, Primarily Pipe Applications |
AWS B2.1-1-204 | Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 3/4 Inch Thick, E6010 (Vertical Downhill Root with the Balance Vertical Uphill), As-Welded Condition, Primarily Pipe App |
AWS B2.1-1-205 | Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, E6010 (Vertical Uphill) Followed by E7018 (Vertical Uphill), As-Welded or PWHT Condition, Primarily Pi |
AWS B2.1-1-206 | Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, E6010 (Vertical Downhill) Followed by E7018 (Vertical Uphill), As-Welded or PWHT Condition, Primarily |
AWS B2.1-1-207 | Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, ER70S-2, As- Welded or PWHT Condition, Primarily Pipe Applications |
AWS B2.1-1-208 | Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, E7018, As-Welded or PWHT Condition, Primarily Pipe Applications |
AWS B2.1-1-209 | Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding Followed by Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, ER70S-2 and E7018, As-Welded or PWHT Condition, Primarily Pipe Ap |
AWS B2.1-1-210 | Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding with Consumable Inrts of Carbon Steel (M-1/ P-1/S-1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick, INMs-1 and ER70S-2, As-Welded or PWHT Condition, Primarily Pipe Applications |
AWS B2.1-1-211 | Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding with Consumable Inrts Followed by Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S- 1, Group 1 or 2), 1/8 Through 1-1/2 Inch Thick INMs-1, ER70S-2, and E7018, As-Welded or |
AWS B2.1-4-217 | Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Chromium-Molybdenum Steel (M-4/P-4, Group 1 or 2), ER80S-B2, 1/8 Through 1/2 in. Thick As-Welded Condition, 1/8 Through 3/4 in. Thick, PWHT Condition, Primarily Pipe Applicatio |
AWS B2.1-4-218 | Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-4/P-4, Group 1 or 2), E8018-B2, 1/8 Through 1/2 in. Thick As-Welded Condition, 1/8 Through 1-1/2 in. Thick, PWHT Condition, Primarily Pipe Applic |
AWS B2.1-4-219 | Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding Followed by Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-4/P-4, Group 1 or 2), 1/8 Through 1/2 in. Thick, As-Welded Condition, 1/8 Through 1-1/2 in. Thick, PWHT Cond |
AWS B2.1-4-220 | Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding (Consumable Inrt Root) of Chromium-Molybdenum Steel (M-4/P-4, Group 1 or 2), E8018-B2, 1/8 Through 1/2 in. Thick, As-Welded Condition, 1/8 Through 3/4 in. Thick, PWHT Condition |
AWS B2.1-4-221 | Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding (Consumable Inrt Root) Followed by Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-4/P-4, Group 1 or 2), 1/8 Through 1/2 in. Thick, As-Welded Condition, 1/8 Through 1 |
AWS B2.1-5A-222 | Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Chromium-Molybdenum Steel (M-5A/P-5A), ER90S-B3, 1/8 Through 1/2 in. Thick, As-Welded Condition, 1/8 Through 3/4 in. Thick, PWHT Condition, Primarily Pipe Applications Site Lic |
AWS B2.1-5A-223 | Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-5A/P-5A), ER9018-B3, 1/8 Through 1/2 in. Thick, As-Welded Condition, 1/8 Through 1-1/2 in. Thick, PWHT Condition, Primarily Pipe Applications Sit |
AWS B2.1-5A-224 | Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding Followed by Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-5A/P-5A), 1/8 Through 1/2 in. Thick, As-Welded Condition, 1/8 Through 1-1/2 in. Thick, PWHT Condition, ER90S |
AWS B2.1-5A-225 | Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding (Consumable Inrt Root) of Chromium-Molybdenum Steel (M-5A/P-5A), 1/8 Through 1/2 in. Thick, As-Welded Condition, 1/8 Through 3/4 in. Thick, PWHT Condition, IN521 and ER90S-B3, P |
AWS B2.1-5A-226 | Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding (Consumable Inrt Root) Followed by Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-5A/P-5A), 1/8 Through 1/2 in. Thick, As-Welded Condition, 1/8 Through 1-1/2 in. Thi |
AWS B2.1-8-023 | Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 Through 1-1/2 Inch Thick, As-Welded Condition |
AWS B2.1-8-024 | Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 Through 1-1/2 Inch Thick, As-Welded Condition |
AWS B2.1-8-025 | Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding Followed by Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 Through 1-1/2 Inch Thick, As-Welded Condition |
AWS B2.1-8-212 | Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 Through 1-1/2 Inch Thick, ER3XX, As-Welded Condition, Primarily Pipe Applications |
AWS B2.1-8-213 | Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 Through 1-1/2 Inch Thick, ER3XX-XX, As-Welded Condition, Primarily Pipe Applications |
AWS B2.1-8-215 | Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding with Consumable Inrt of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 Through 1-1/2 Inch Thick, IN3XX and ER3XX, As-Welded Condition (Primarily Pipe Applications) |
AWS B2.1-8-216 | Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding with Consumable Inrt Followed by Shielded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 Through 1-1/2 Inch Thick, IN3XX, ER3XXX, and E3XX-XX, As-We |
AWS B2.2 | Standard for Brazing Procedure and Performance Qualification |
AWS B4.0M | Standard Methods for Mechanical Testing of Welds焊接接头机械性能测试标准 |
AWS B5.17 | Specification for the Qualification of Welding Fabricators |
AWS B5.2 | Specification for the Qualification of Welding Inspector Specialists and Welding Inspector Assistants |
AWS B5.5 | Specification for the Qualification of Welding Educators |
AWS B5.9 | Specification for the Qualification of Welding Supervisors |
AWS BRM | Brazing Handbook 1991 Fourth Edition |
AWS BRM APP A | Definitions of Terms Fourth Editioin (Brazing Handbook) |
AWS BRM APP B | Properties of Brazeable Metals and Alloys Fourth Edition |
AWS BRM APP C | Thermal Expansion Data Fourth Edition |
AWS BRM CH 1 | Fundamentals Fourth Edition (Brazing Handbook) |
AWS BRM CH 10 | Furnace Brazing Fourth Edition (Brazing Handbook) |
AWS BRM CH 11 | Induction Brazing Fourth Edition (Brazing Handbook) |
AWS BRM CH 12 | Dip Brazing Fourth Edition (Brazing Handbook) |
AWS BRM CH 13 | Resistance Brazing Fourth Edition (Brazing Handbook) |
AWS BRM CH 14 | Braze Welding Fourth Edition (Brazing Handbook) |
AWS BRM CH 15 | Other Process Fourth Edition (Brazing Handbook) |
AWS BRM CH 16 | Inspection of Brazed Joints Fourth Edition (Brazing Handbook) |
AWS BRM CH 17 | Codes and Other Standards Fourth Edition (Brazing Handbook) |
AWS BRM CH 18 | Copper and Copper Alloys Fourth Edition (Brazing Handbook) |
AWS BRM CH 19 | Precious Metals (Brazing Handbook) |
AWS BRM CH 2 | Brazement Design and Drafting Room Practice Fourth Edition (Brazing Handbook) |
AWS BRM CH 20 | Low Carbon, Low Alloy, and Tool Steels Fourth Edition (Brazing Handbook) |
AWS BRM CH 21 | Brazing of Cast Iron Fourth Edition (Brazing Handbook) |
AWS BRM CH 22 | Pipe and Tube Fourth Edition (Brazing Handbook) |
AWS BRM CH 23 | Nickel Ba and Cobalt-Containing Alloys Fourth Edition (Brazing Handbook) |
AWS BRM CH 24 | Stainless Steels Fourth Edition (Brazing Handbook) |
AWS BRM CH 25 | Aluminum and Aluminum Alloys Fourth Edition (Brazing Handbook) |
AWS BRM CH 26 | Magnesium and Magnesium Alloys Fourth Edition (Brazing Handbook) |
AWS BRM CH 27 | Titanium, Zirconium, and Beryllium Fourth Edition (Brazing Handbook) |
AWS BRM CH 28 | Refractory Metals - Niobium, Molybdenum, Tantalum, and Tungsten Fourth Edition (Brazing Handbook) |
AWS BRM CH 29 | Electron Tube and Vacuum Equipment Brazing Fourth Edition (Brazing Handbook) |
AWS BRM CH 3 | Brazing Filler Metals Fourth Edition (Brazing Handbook) |
AWS BRM CH 30 | Carbide Tools Fourth Edition |
AWS BRM CH 31 | Ceramic Brazing Fourth Edition |
AWS BRM CH 32 | Carbon and Graphite Fourth Edition |
AWS BRM CH 33 | Honeycomb Structure Brazing Fourth Edition |
AWS BRM CH 4 | Fluxes and Atmospheres Fourth Edition (Brazing Handbook) |
AWS BRM CH 5 | Corrosion Resistance of Brazed Joints Fourth Edition (Brazing Handbook) |
AWS BRM CH 6 | Safety and Health Fourth Edition (Brazing Handbook) |
AWS BRM CH 7 | Precleaning and Surface Preparation Fourth Edition (Brazing Handbook) |
AWS BRM CH 8 | Asmbly and Fixturing Fourth Editiion (Brazing Handbook) |
AWS BRM CH 9 | Torch Brazing Fourth Edition (Brazing Handbook) |
AWS BRM HDBK | Brazing Handbook 1991 Fourth Edition |
AWS BRM INDEX | Index Fourth Edition (Brazing Handbook) |
AWS C1.1M/C1.1 | Recommended Practices for Resistance Welding |
AWS C1.3 | Recommended Practices for Resistance Welding Coated Low Carbon Steels R(1987) |
AWS C1.4M/C1.4 | Specification for Resistance Welding of Carbon and Low-Alloy Steels |
AWS C2.14 | Corrosion Tests of Flame-Sprayed Coated Steel 19-Year Report |
AWS C2.16 | Guide for Thermal-Spray Operator Qualification |
AWS C2.18 | Guide for the Protection of Steel with Thermal Sprayed Coatings of Aluminum and Zinc and Their Alloys and Composites |
AWS C2.2 | Recommended Practices for Metallizing with Aluminium and Zinc for Protection of Iron and Steel |
AWS C3.2 | Standard Method for Evaluating the Strength of Brazed Joints in Shear R(1992) |
AWS C3.3 | Recommended Practices for Design, Manufacture, and Inspection of Critical Brazed Components R(1992) |
AWS C3.4 | Specification for Torch Brazing |
AWS C3.5 | Specification for Induction Brazing |
AWS C3.6 | Specification for Furnace Brazing |
AWS C3.7 | Specification for Aluminum Brazing |
AWS C3.8 | Recommended Practices for Ultrasonic Inspection of Brazed Joints |
AWS C4.1 | Criteria for Describing Oxygen-Cut Surfaces |
AWS C4.2 | Operator's Manual for Oxyfuel Gas Cutting |
AWS C4.3 | Operators Manual for Oxyfuel Gas Heating Torch Operation |
AWS C4.5M | Uniform Designation System for Oxyfuel Nozzles Errata:2000 |
AWS C5.1 | Recommended Practices for Plasma-Arc Welding |
AWS C5.10 | Recommended Practices for Shielding Gas for Welding and Plasma Arc Cutting |
AWS C5.2 | Recommended Practices for Plasma Arc Cutting R(1994) |
AWS C5.3 | Recommended Practices for Air Carbon Arc Gouging and Cutting |
AWS C5.4 | Recommended Practices for Stud Welding |
AWS C5.5 | Recommended Practices for Gas Tungsten Arc Welding R(1994) |
AWS C5.6 | Recommended Practices for Gas Metal Arc Welding R(1994) |
AWS C5.7 | Recommended Practices for Electrogas Welding |
AWS C6.1 | Recommended Practices for Friction Welding R(1998) |
AWS C7.1 | Recommended Practices for Electron Beam Welding |
AWS C7.2 | Recommended Practices for Lar Beam Welding, Cutting, and Drilling |
AWS C7.3 | Process Specification for Electron Beam Welding |
AWS CAWF | Characterization of Arc Welding Fume |
AWS CC-IM | Code Clinic for Study of AWS D1.1 Structural Welding code - Steel |
AWS CC-RM D1.1 | Code Clinic for Study of AWS D1.1 Structural Welding Code-Steel - Reference Manual |
AWS CMWI | Contents; 2000 |
AWS CMWI APP A | Additional Resources |
AWS CMWI APP B | Sample Forms |
AWS CMWI APP C | Answer Key ReQuestions Chapters 1 - 13 |
AWS CMWI CH 1 | Welding Inspector |
AWS CMWI CH 10 | Welding, Brazing, and Cutting Process |
AWS CMWI CH 11 | Weld and Ba Metal Discontinuities |
AWS CMWI CH 12 | Nondestructive Examination (NDE) Process |
AWS CMWI CH 13 | Inspection Reports |
AWS CMWI CH 2 | Welding Inspector Responsibilities |
AWS CMWI CH 3 | Safety |
AWS CMWI CH 4 | Standards, Including Codes, and Specifications |
AWS CMWI CH 5 | Weld Geometry and Welding Terminology |
AWS CMWI CH 6 | Welding and Nondestructive Examination Symbols |
AWS CMWI CH 7 | Weldability, Welding Metallurgy, and Welding Chemistry |
AWS CMWI CH 8 | Destructive Testing |
AWS CMWI CH 9 | Welding, Procedure and Welder Qualification |
AWS CMWI HDBK | Contents; Errata 2 - 1994 |
AWS CMWI INDEX | Index |
AWS D1.1 | Structural Welding Code - Steel |
AWS D1.1-BI | The Official Book of D1.1 Interpretations - a Collection of Respons to Formal Inquiries About the Requirements of AWS D1.1 (1976-1994) First Printing |
AWS D1.2 | Structural Welding Code Aluminum |
AWS D1.3 | Structural Welding Code - Sheet Steel |
AWS D1.4 | Structural Welding Code - Reinforcing Steel |
AWS D1.5 | Bridge Welding Code Interim Specifications 1999; AASHTO BWC-3 |
AWS D1.6 | Structural Welding Code - Stainless Steel |
AWS D10.10/D.10M | Recommended Practices for Local Heating of Welds in Piping and Tubing |
AWS D10.11 | Recommended Practices for Root Pass Welding of Pipe without Backing R(1992) |
AWS D10.12M/D10.12 | Guide for Welding Mild Steel Pipe |
AWS D10.13 | Recommended Practices for the Brazing of Copper Pipe and Tubing for Medical Gas Systems |
AWS D10.4 | Recommended Practices for Welding Austenitic Chromium-Nickel Stainless Steel Piping and Tubing R(1992) |
AWS D10.6/D10.6M | Recommended Practices for Gas Tungsten Arc Welding of Titanium Pipe and Tubing |
AWS D10.7 | Recommended Practices for Gas Shielded Arc Welding of Aluminum and Aluminum Alloy Pipe; Errata R(1992) |
AWS D10.7M/D10.7 | |
AWS D10.8 | |
AWS D10.8 | Recommended Practices for Welding of Chromium-Molybdenum Steel Piping and Tubing R(1992) |
AWS D11.2 | Guide for Welding Iron Castings |
AWS D14.1 | Specification for Welding of Industrial and Mill Cranes and Other Material Handling Equipment |
AWS D14.2 | Specification for Metal Cutting Machine Tool Weldments |
AWS D14.3/D14.3M | Specification for Welding Earthmoving and Construction Equipment |
AWS D14.4 | |
AWS D14.4 | Specification for Welded Joints in Machinery and Equipment R(1991) |
AWS D14.5 | Specification for Welding of Press and Press Components |
AWS D14.6 | Specification for Welding of Rotating Elements of Equipment |
AWS D15.1 | Railroad Welding Specification - Cars and Locomotives |
AWS D15.2 | Recommended Practices for the Welding of Rails and Related Rail Components for U by Rail Vehicles |
AWS D16.2 | Standard for Components of Robotic and Automatic Welding Installations |
AWS D16.4 | Specification for the Qualification of Robotic Arc Welding Personnel |
AWS D18.1 | Specification for Welding of Austenitic Stainless Steel Tube and Pipe Systems in Sanitary (Hygienic) Applications |
AWS D18.2 | Guide to Weld Discoloration Levels on Inside of Austenitic Stainless Steel Tube |
AWS D19.0-72 | Welding Zinc-Coated Steel First Edition |
AWS D3.5 | Guide for Steel Hull Welding |
AWS D3.6M | Specification for Underwater Welding |
AWS D3.7 | Guide for Aluminum Hull Welding |
AWS D8.14M/D8.14 | Specification for Automotive and Light Truck Components Weld Quality - Aluminum Arc Welding |
AWS D8.5 | Recommended Practices for Automotive Portable-Gun Resistance-Spot Welding; Supplement - 1969 |
AWS D8.7 | Recommended Practices for Automotive Weld Quality-Resistance Spot Welding (SAE J 1188) R(1994) |
AWS D8.8 | Specification for Automotive and Light Truck Components Weld Quality - Arc Welding SAE HS J1196 |
AWS D8.9 | Recommended Practices for Test Methods for Evaluating the Resistance Spot Welding Behavior of Automotive Sheet Steel Materials SAE D8.9 |
AWS D9.1M/D9.1 | Sheet Metal Welding Code |
AWS DPW | Design and Planning Manual for Cost-Effective Welding |
AWS EG2.0 | Guide for The Training and Qualification of Welding Personnel Entry Level Welder |
AWS EG3.0 | Guide for the Training and Qualification of Welding Personnel Level II - Advanced Welder |
AWS EG4.0 | Guide for the Training and Qualification of Welding Personnel Level III - Expert Welder |
AWS EWH-1 | Effects of Welding on Health I |
AWS EWH-2 | Effects of Welding on Health II |
AWS EWH-3 | Effects of Welding on Health III |
AWS EWH-4 | Effects of Welding on Health IV |
AWS EWH-5 | Effects of Welding on Health V |
AWS EWH-6 | Effects of Welding on Health VI |
AWS EWH-7 | Effects of Welding on Health VII |
AWS EWH-8 | Effects of Welding on Health VIII |
AWS EWH-9 | Effects of Welding on Health IX |
AWS F1.1 | Method for Sampling Airborne Particulates Generated by Welding and Allied Process |
AWS F1.2 | Laboratory Method for Measuring Fume Generation Rates and Total Fume Emission of Welding and Allied Process |
AWS F1.3 | Sampling Strategy Guide for Evaluating Contaminants in the Welding Environment |
AWS F1.4 | Methods for Analysis of Airborne Particulates Generated by Welding and Allied Process |
AWS FACT SHEET NO. 1 | Fumes and Gas |
AWS FACT SHEET NO. 10 | Falling Objects |
AWS FACT SHEET NO. 11 | Confined Spaces |
AWS FACT SHEET NO. 12 | Contact Lens Wear |
AWS FACT SHEET NO. 13 | Ergonomics in the Welding Environment |
AWS FACT SHEET NO. 14 | Graphic Symbols for Precautionary Labels |
AWS FACT SHEET NO. 15 | Style Guidelines for Safety and Health Documents |
AWS FACT SHEET NO. 16 | Pacemakers and Welding |
AWS FACT SHEET NO. 17 | Electric and Magnetic Fields (EMF) |
AWS FACT SHEET NO. 18 | Lockout/Tagout |
AWS FACT SHEET NO. 19 | Lar Welding and Cutting Safety |
AWS FACT SHEET NO. 2 | Radiation |
AWS FACT SHEET NO. 20 | Thermal Spraying Safety |
AWS FACT SHEET NO. 3 | Noi |
AWS FACT SHEET NO. 4 | Chromium and Nickel in Welding Fume |
AWS FACT SHEET NO. 5 | Electrical Hazards |
AWS FACT SHEET NO. 6 | Fire and Explosion Prevention |
AWS FACT SHEET NO. 7 | Burn Protection |
AWS FACT SHEET NO. 8 | Mechanical Hazards |
AWS FACT SHEET NO. 9 | Tripping and Falling |
AWS FGW | Contents (Fumes and Gas in the Welding Environment) |
AWS FGW APP A | Table A1 Electrodes Ud in Part III (Fumes and Gas in the Welding Environment) |
AWS FGW APP B | Tables B1 to B43 (Tubular Data on Fume Generation Characteristics of Electrodes Ud in Part II) (Fumes and Gas in the Welding Environment) |
AWS FGW APP C | Tables C1 to C4 Summary of Original Data, Part III (Fumes and Gas in the Welding Environment) |
AWS FGW APP D | Tables D1 and D2 Laboratory Data Sheets for Part IV (Fumes and Gas in the Welding Environment) |
AWS FGW APP E | Tables E1 to E6 Laboratory Data Sheets for Part V (Fumes and Gas in the Welding Environment) |
AWS FGW HDBK | Contents (Fumes and Gas in the Welding Environment) |
AWS FGW PT 1 | Ventilation Studies (Fumes and Gas in the Welding Environment) |
AWS FGW PT 2 | Arc Welding Fumes and Gas (Fumes and Gas in the Welding Environment) |
AWS FGW PT 3 | Brazing Fumes and Gas (Fumes and Gas in the Welding Environment) |
AWS FGW PT 4 | Thermal Spraying Fumes and Gas (Fumes and Gas in the Welding Environment) |
AWS FGW PT 5 | Fumes and Gas from Oxygen Cutting (Fumes and Gas in the Welding Environment) |
AWS G1.10M | Guide for The Evaluation of Hot Gas, Hot Gas Extrusion, and Heated Tool Butt Thermoplastic Welds |
AWS GWF | Guide for the Design of a Welder Training Facility |
AWS HOT | Hands-On Training u of Measuring Tools for the AWS Certified Welding Inspector Hands-On Examination |
AWS JWE | Jefferson's Welding Encyclopedia Eighteenth Edition |
AWS LVOS | Laboratory Validation of Ozone Sampling with Spill-Proof Impingers |
AWS OPP | Underwater Welding of Offshore Platforms and Pipelines |
AWS QC 7 | Standard for AWS Certified Welders |
AWS SH | Soldering Handbook (Soldering Manual) |
AWS SH ANNEX A | Annex A (Soldering Manual) |
AWS SH ANNEX B | Annex B (Soldering Manual) |
AWS SH ANNEX C | Annex C (Soldering Manual) |
AWS SH ANNEX D | Annex D (Soldering Manual) |
AWS SH ANNEX E | Annex E (Soldering Manual) |
AWS SH CH 1 | Fundamentals of Soldering Technology (Soldering Manual) |
AWS SH CH 2 | Solders Materials (Soldering Manual) |
AWS SH CH 3 | Substrate Materials (Soldering Manual) |
AWS SH CH 4 | Fluxes (Soldering Manual) |
AWS SH CH 5 | Solder Pastes (Soldering Manual) |
AWS SH CH 6 | Asmbly Process (Soldering Manual) |
AWS SH CH 7 | Inspection Techniques for Product Acceptance and Process Optimization (Soldering Manual) |
AWS SH CH 8 | Environmental, Safety, and Health (Soldering Manual) |
AWS SH HDBK | Soldering Handbook (Soldering Manual) |
AWS SH INDEX | Index to Soldering Handbook (Soldering Manual) |
AWS SHFS | Safety and Health Fact Sheets Second Edition |
AWS TS | Thermal Spraying - Practice, Theory, and Application |
AWS TSM | Thermal Spray Manual - A Practicle Reference Guide |
AWS TWFR | (Cancelled) Toxicity of Welding Fume in Rats |
AWS UEAW | Handbook on the Ultrasonic Examination of Austenitic Welds |
AWS UGFM | AWS Ur's Guide to Filler Metals |
AWS VIW-IM | Visual Inspection Workshop Instructors Manual |
AWS WCI | Welding of Cast Iron - a Selection of Papers |
AWS WFDP | Welding Fume Control, a Demonstration Project 1982 |
AWS WHB-1 | Welding Technology (Welding Handbook, Volume 1) |
AWS WHB-1 APP A | Terms and Definitions (Welding Handbook, Volume 1) |
AWS WHB-1 APP B | Metric Practice Guide (Welding Handbook, Volume 1) |
AWS WHB-1 CH 1 | Survey of Joining and Cutting Process (Welding Handbook, Volume 1) |
AWS WHB-1 CH 10 | Automation and Control (Welding Handbook, Volume 1) |
AWS WHB-1 CH 11 | Weld Quality (Welding Handbook, Volume 1) |
AWS WHB-1 CH 12 | Testing for Evaluation of Welded Joints (Welding Handbook, Volume 1) |
AWS WHB-1 CH 13 | Codes and Other Standards (Welding Handbook, Volume 1) |
AWS WHB-1 CH 14 | Qualification and Certification (Welding Handbook, Volume 1) |
AWS WHB-1 CH 15 | Inspection (Welding Handbook, Volume 1) |
AWS WHB-1 CH 16 | Safe Practices (Welding Handbook, Volume 1) |
AWS WHB-1 CH 2 | Physics of Welding (Welding Handbook, Volume 1) |
AWS WHB-1 CH 3 | Heat Flow in Welding (Welding Handbook, Volume 1) |
AWS WHB-1 CH 4 | Welding Metallurgy (Welding Handbook, Volume 1) |
AWS WHB-1 CH 5 | Design for Welding (Welding Handbook, Volume 1) |
AWS WHB-1 CH 6 | Symbols for Welding and Inspection (Welding Handbook, Volume 1) |
AWS WHB-1 CH 7 | Residual Stress and Distortion (Welding Handbook, Volume 1) |
AWS WHB-1 CH 8 | Welding and Cutting Costs: Estimates and Controls (Welding Handbook, Volume 1) |
AWS WHB-1 CH 9 | Fixtures and Positioners (Welding Handbook, Volume 1) |
AWS WHB-1 HDBK | Welding Technology (Welding Handbook, Volume 1) |
AWS WHB-2 | Welding Handbook Volume 2 Eighth Edition (Welding Handbook, Vol. 2) |
AWS WHB-2 CH 1 | Arc Welding Power Sources (Welding Handbook, Vol. 2) |
AWS WHB-2 CH 10 | Plasma Arc Welding (Welding Handbook, Vol. 2) |
AWS WHB-2 CH 11 | Oxyfuel Gas Welding (Welding Handbook, Vol. 2) |
AWS WHB-2 CH 12 | Brazing (Welding Handbook, Vol. 2) |
AWS WHB-2 CH 13 | Soldering (Welding Handbook, Vol. 2) |
AWS WHB-2 CH 14 | Oxygen Cutting (Welding Handbook, Vol. 2) |
AWS WHB-2 CH 15 | Arc Cutting and Gouging |
AWS WHB-2 CH 16 | Lar Beam and Water Jet Cutting |
AWS WHB-2 CH 17 | Spot, Seam, and Projection Welding |
AWS WHB-2 CH 18 | Flash, Upt, and Percussion Welding |
AWS WHB-2 CH 19 | Resistance Welding Equipment |
AWS WHB-2 CH 2 | Shielded Metal Arc Welding (Welding Handbook, Vol. 2) |
AWS WHB-2 CH 20 | High-Frequency Welding |
AWS WHB-2 CH 21 | Electron Beam Welding |
AWS WHB-2 CH 22 | Lar Beam Welding |
AWS WHB-2 CH 23 | Friction Welding |
AWS WHB-2 CH 24 | Explosion Welding |
AWS WHB-2 CH 25 | Ultrasonic Welding |
AWS WHB-2 CH 26 | Diffusion Welding and Brazing |
AWS WHB-2 CH 27 | Adhesive Bonding of Metals |
AWS WHB-2 CH 28 | Thermal Spraying |
AWS WHB-2 CH 29 | Other Welding Process |
AWS WHB-2 CH 3 | Gas Tungsten Arc Welding (Welding Handbook, Vol. 2) |
AWS WHB-2 CH 4 | Gas Metal Arc Welding (Welding Handbook, Vol. 2) |
AWS WHB-2 CH 5 | Flux Cored Arc Welding (Welding Handbook, Vol. 2) |
AWS WHB-2 CH 6 | Submerged Arc Welding (Welding Handbook, Vol. 2) |
AWS WHB-2 CH 7 | Electrogas Welding (Welding Handbook, Vol. 2) |
AWS WHB-2 CH 8 | Electroslag Welding (Welding Handbook, Vol. 2) |
AWS WHB-2 CH 9 | Stud Welding (Welding Handbook, Vol. 2) |
AWS WHB-2 HDBK | Welding Handbook Volume 2 Eighth Edition (Welding Handbook, Vol. 2) |
AWS WHB-2 INDEX | Index (Welding Handbook, Vol. 2) |
AWS WHB-3 | Materials and Applications - Part 1 (Welding Handbook, Vol. 3) |
AWS WHB-3 CH 1 | Aluminum and Aluminum Alloys (Welding Handbook, Vol. 3) |
AWS WHB-3 CH 10 | Underwater Welding and Cutting (Welding Handbook, Vol. 3) |
AWS WHB-3 CH 2 | Magnesium and Magnesium Alloys (Welding Handbook, Vol. 3) |
AWS WHB-3 CH 3 | Copper and Copper Alloys (Welding Handbook, Vol. 3) |
AWS WHB-3 CH 4 | Nickel and Cobalt Alloys (Welding Handbook, Vol. 3) |
AWS WHB-3 CH 5 | Lead and Zinc (Welding Handbook, Vol. 3) |
AWS WHB-3 CH 6 | Plastics (Welding Handbook, Vol. 3) |
AWS WHB-3 CH 7 | Composites (Welding Handbook, Vol. 3) |
AWS WHB-3 CH 8 | Ceramics (Welding Handbook, Vol. 3) |
AWS WHB-3 CH 9 | Maintenance and Repair Welding (Welding Handbook, Vol. 3) |
AWS WHB-3 HDBK | Materials and Applications - Part 1 (Welding Handbook, Vol. 3) |
AWS WHB-3 INDEX | Index (Welding Handbook, Vol. 3) |
AWS WHB-4 | Metals and Their Weldability (Welding Handbook, Vol. 4) |
AWS WHB-4 CH 1 | Carbon and Low Alloy Steels (Welding Handbook, Vol. 4) |
AWS WHB-4 CH 10 | Titanium, Zirconium, Hafnium, Tantalum, and Columbium (Welding Handbook, Vol. 4) |
AWS WHB-4 CH 11 | Other Metals (Welding Handbook, Vol. 4) |
AWS WHB-4 CH 12 | Dissimilar Metals (Welding Handbook, Vol. 4) |
AWS WHB-4 CH 2 | Stainless Steels (Welding Handbook, Vol. 4) |
AWS WHB-4 CH 3 | Tool and Die Steels (Welding Handbook, Vol. 4) |
AWS WHB-4 CH 4 | High Alloy Steels (Welding Handbook, Vol. 4) |
AWS WHB-4 CH 5 | Cast Irons (Welding Handbook, Vol. 4) |
AWS WHB-4 CH 6 | Nickel and Cobalt Alloys (Welding Handbook, Vol. 4) |
AWS WHB-4 CH 7 | Copper Alloys (Welding Handbook, Vol. 4) |
AWS WHB-4 CH 8 | Aluminum Alloys (Welding Handbook, Vol. 4) |
AWS WHB-4 CH 9 | Magnesium Alloys (Welding Handbook, Vol. 4) |
AWS WHB-4 HDBK | Metals and Their Weldability (Welding Handbook, Vol. 4) |
AWS WHB-4 INDEX | Index (Welding Handbook, Vol. 4) |
AWS WHB-4 PART 2 | Materials and Applications - Part 2 Eighth Edition (Welding Handbook, Vol. 4) |
AWS WHB-4 PART 2 CH 1 | Carbon and Low-Alloy Steels (Welding Handbook, Vol. 4) |
AWS WHB-4 PART 2 CH 10 | Reactive Refractory, and Precious Metals and Alloys (Welding Handbook, Vol. 4) |
AWS WHB-4 PART 2 CH 2 | High-Alloy Steels (Welding Handbook, Vol. 4) |
AWS WHB-4 PART 2 CH 3 | Coated Steels (Welding Handbook, Vol. 4) |
AWS WHB-4 PART 2 CH 4 | Tool and Die Steels (Welding Handbook, Vol. 4) |
AWS WHB-4 PART 2 CH 5 | Stainless and Heat-Resisting Steels (Welding Handbook, Vol. 4) |
AWS WHB-4 PART 2 CH 6 | Clad and Dissimilar Metals (Welding Handbook, Vol. 4) |
AWS WHB-4 PART 2 CH 7 | Surfacing (Welding Handbook, Vol. 4) |
AWS WHB-4 PART 2 CH 8 | Cast Irons (Welding Handbook, Vol. 4) |
AWS WHB-4 PART 2 CH 9 | Titanium and Titanium Alloys (Welding Handbook, Vol. 4) |
AWS WHB-4 PART 2 HDBK | Materials and Applications - Part 2 Eighth Edition (Welding Handbook, Vol. 4) |
AWS WHB-4 PART 2 INDEX | Welding Handbook Index of Major Subjects (Welding Handbook, Vol. 4) |
AWS WHB-5 | Engineering, Costs, Quality, and Safety (Welding Handbook, Vol. 5) |
AWS WHB-5 CH 1 | Design for Welding (Welding Handbook, Vol. 5) |
AWS WHB-5 CH 10 | Safe Practices (Welding Handbook, Vol. 5) |
AWS WHB-5 CH 2 | Symbols for Welding, Brazing, and Nondestructive Examination (Welding Handbook, Vol. 5) |
AWS WHB-5 CH 3 | Economics and Cost Estimating (Welding Handbook, Vol. 5) |
AWS WHB-5 CH 4 | Fixtures and Positioners (Welding Handbook, Vol. 5) |
AWS WHB-5 CH 5 | Automation and Control (Welding Handbook, Vol. 5) |
AWS WHB-5 CH 6 | Codes and Standards (Welding Handbook, Vol. 5) |
AWS WHB-5 CH 7 | Qualification and Certification (Welding Handbook, Vol. 5) |
AWS WHB-5 CH 8 | Weld Quality (Welding Handbook, Vol. 5) |
AWS WHB-5 CH 9 | Inspection (Welding Handbook, Vol. 5) |
AWS WHB-5 HDBK | Engineering, Costs, Quality, and Safety (Welding Handbook, Vol. 5) |
AWS WHB-5 INDEX | Index (Welding Handbook, Vol. 5) |
AWS WI | Welding Inspection Handbook Third Edition (Welding Inspection) |
AWS WI CH 1 | Application and Scope (Welding Inspection) |
AWS WI CH 10 | Qualification of Welding Procedure Specifications (Welding Inspection) |
AWS WI CH 11 | Qualification of Welders and Welding Operators (Welding Inspection) |
AWS WI CH 12 | Computerization of Welding Inspection and Quality (Welding Inspection) |
AWS WI CH 13 | Destructive Testing of Welds (Welding Inspection) |
AWS WI CH 14 | Proof Tests (Welding Inspection) |
AWS WI CH 15 | Nondestructive Examination Methods (Welding Inspection) |
AWS WI CH 16 | Qualification of Nondestructive Examination Personnel (Welding Inspection) |
AWS WI CH 17 | Codes and Other Standards (Welding Inspection) |
AWS WI CH 18 | Metric Practice (Welding Inspection) |
AWS WI CH 2 | Symbols (Welding Inspection) |
AWS WI CH 3 | Requirements for the Welding Inspector (Welding Inspection) |
AWS WI CH 4 | Welding Inspection Operations (Welding Inspection) |
AWS WI CH 5 | Inspection Safety Considerations (Welding Inspection) |
AWS WI CH 6 | Quality Assurance (Welding Inspection) |
AWS WI CH 7 | Ferrous Welding Metallurgy (Welding Inspection) |
AWS WI CH 8 | Preheating and Postweld Heat Treating (Welding Inspection) |
AWS WI CH 9 | Weld and Weld Related Discontinuities (Welding Inspection) |
AWS WI HDBK | Welding Inspection Handbook Third Edition (Welding Inspection) |
AWS WI INDEX | Index to Welding Inspection (Welding Inspection) |
AWS WJT-G | Joint - Weld Terminology and Standard Welding Symbols Interpretation |
AWS WQAG | Welding Quality Assurance Guideline for Fabricators |
本文发布于:2023-05-11 13:06:17，感谢您对本站的认可！
本文链接：https://www.wtabcd.cn/fanwen/fan/78/585663.html
版权声明：本站内容均来自互联网，仅供演示用，请勿用于商业和其他非法用途。如果侵犯了您的权益请与我们联系，我们将在24小时内删除。
| 留言与评论（共有 0 条评论） |
